Jump to content

Official Magic Box discussion thread


lilotimz

Recommended Posts

12 hours ago, though said:

that puts you outside the line and wal-mart down the street inside the line?

Apparently yes. I can't find any spectrum asset maps that show the same thing that I was sent by the MB team.

I'm obviously within 35 miles of the tower, and can't find a map showing that we're "splitting the football" ...

Link to comment
Share on other sites

  • 2 weeks later...

It's all over now but the crying. I had the flu last week...but during that time, I found out from George Schnelbacher via email that I'm in a "bermunda triangle" per se... Inside the outlined area below is where (I'm guessing) B41 can't be broadcast by Sprint due to licensing ...

I"m not understanding this from the license perspective..maybe someone can divulge what the restraints are for this particular area... and why is it off in the middle of bum$$ck Alabama, no where NEAR a major metro area...but splits an area across 2 counties. 

Makes absolutely NO sense to me. 

image001.jpg

Link to comment
Share on other sites

36 minutes ago, jonathanm1978 said:

It's all over now but the crying. I had the flu last week...but during that time, I found out from George Schnelbacher via email that I'm in a "bermunda triangle" per se... Inside the outlined area below is where (I'm guessing) B41 can't be broadcast by Sprint due to licensing ...

I"m not understanding this from the license perspective..maybe someone can divulge what the restraints are for this particular area... and why is it off in the middle of bum$$ck Alabama, no where NEAR a major metro area...but splits an area across 2 counties. 

Makes absolutely NO sense to me. 

 

Join the club. Not available at my primary address either 😕

Link to comment
Share on other sites

4 hours ago, jonathanm1978 said:

It's all over now but the crying. I had the flu last week...but during that time, I found out from George Schnelbacher via email that I'm in a "bermunda triangle" per se... Inside the outlined area below is where (I'm guessing) B41 can't be broadcast by Sprint due to licensing ...

I"m not understanding this from the license perspective..maybe someone can divulge what the restraints are for this particular area... and why is it off in the middle of bum$$ck Alabama, no where NEAR a major metro area...but splits an area across 2 counties. 

Makes absolutely NO sense to me. 

image001.jpg

For Talladega and Shelby counties for Wilsonville  there are three licenses to be concerned about that Sprint does not control::

1) https://wireless2.fcc.gov/UlsApp/UlsSearch/licenseMarketSum.jsp?licKey=2592111

2) https://wireless2.fcc.gov/UlsApp/UlsSearch/licenseMap.jsp?licKey=2588129

3) https://wireless2.fcc.gov/UlsApp/UlsSearch/licenseMap.jsp?licKey=2593016

These occupy the key spectrum Sprint typically uses for Band 41 and extra for Magic Boxes.

yZZJ3MT.jpg

 

 

  • Like 1
Link to comment
Share on other sites

After months and months of our MB only outputting d/l speeds under 30mbps... we are now back up to what it was before.  This is the first time with the MB Gold that we have achieved these speeds:

 

DL Mbps/UL Mbps

73.3 / 7.39

68.0 / 8.08

78.5 / 9.46

 

 

 

  • Like 4
Link to comment
Share on other sites

Did anyone else recently have to get a replacement Magic Box Gold because of the defective firmware update?

Link to comment
Share on other sites

3 hours ago, shaferz said:

After months and months of our MB only outputting d/l speeds under 30mbps... we are now back up to what it was before.  This is the first time with the MB Gold that we have achieved these speeds:

 

DL Mbps/UL Mbps

73.3 / 7.39

68.0 / 8.08

78.5 / 9.46

 

 

 

Yeah mine is also doing pretty well also:

59.8/7.25

44.5/6.60

64.7/.26

Link to comment
Share on other sites

5 hours ago, shaferz said:

After months and months of our MB only outputting d/l speeds under 30mbps... we are now back up to what it was before.  This is the first time with the MB Gold that we have achieved these speeds:

 

DL Mbps/UL Mbps

73.3 / 7.39

68.0 / 8.08

78.5 / 9.46

 

 

 

Has a new FW been pushed out?

Link to comment
Share on other sites

I just recently got the Gen 3 Magic Box and I'm curious what the parameters are for my phone actually connecting to and using the Magic Box's signal. Sometimes my phone connects, other times my phone stays locked to a tower for hours and won't make the switch.

 

Is there something wrong here or does the phone just keep the original signal until it's poor enough that it needs to switch to the Magic Box?

 

Thanks.

Link to comment
Share on other sites

  • 3 weeks later...

I am in Prattville AL, just North of Montgomery. Had 3 magic boxes so far. Receive the 1st in February of 2018, Second in August 2018 and the 3rd (MB Gold) in January 2019. Worked great up until about February of this year. Was listed as an available site area until March 2019. Speeds were decent, 20 down and 8 up. Now the network is unusable at best. Band 25 was consistent and usable. No matter where in my home I put the MB, it grabs a very weak band 41. This results in 1-2MB down and 5-7Kb up. Have called the MB support line and have an open ticket with engineering. NO help whatsoever. Keep getting told ONLY that I am not in a serviceable area. VERY frustrating. This is the only, or was, my only option for home internet. I have 4 phones and 1 mifi device connected to the MB and now it is unusable at best

  • Like 1
Link to comment
Share on other sites

27 minutes ago, ss7seven said:

I am in Prattville AL, just North of Montgomery. Had 3 magic boxes so far. Receive the 1st in February of 2018, Second in August 2018 and the 3rd (MB Gold) in January 2019. Worked great up until about February of this year. Was listed as an available site area until March 2019. Speeds were decent, 20 down and 8 up. Now the network is unusable at best. Band 25 was consistent and usable. No matter where in my home I put the MB, it grabs a very weak band 41. This results in 1-2MB down and 5-7Kb up. Have called the MB support line and have an open ticket with engineering. NO help whatsoever. Keep getting told ONLY that I am not in a serviceable area. VERY frustrating. This is the only, or was, my only option for home internet. I have 4 phones and 1 mifi device connected to the MB and now it is unusable at best

You might want to look over my posts in the last month or 2...I've had to deal with the exact same thing. Chances are, you're in the same type of area that I am in...where they allowed MB to work, then discovered they didn't have the proper licensing for it to operate. I'd be ready to get some return boxes ...they are probably gonna want you to send the MB units back. 

I just got the S1000 femtocell yesterday...I vowed after the Airvana 2.5 that I wouldn't have another femtocell (charged for data from ISP, just to use that same data on my phone and get charged again)...but with unlimited it doesn't matter much. I only agreed to use an LTE femtocell because I'm having fiber 100/100 installed in about a month when it becomes available to us.  On my old DSL, not an option at 6meg down, 0.5meg up.

Not very happy with that licensing crap...I was under the impression that Sprint had the B41 spectrum by the reigns for the most part. But apparently i'm in one of those areas where they don't.

  • Like 1
Link to comment
Share on other sites

6 minutes ago, jonathanm1978 said:

You might want to look over my posts in the last month or 2...I've had to deal with the exact same thing. Chances are, you're in the same type of area that I am in...where they allowed MB to work, then discovered they didn't have the proper licensing for it to operate. I'd be ready to get some return boxes ...they are probably gonna want you to send the MB units back. 

I just got the S1000 femtocell yesterday...I vowed after the Airvana 2.5 that I wouldn't have another femtocell (charged for data from ISP, just to use that same data on my phone and get charged again)...but with unlimited it doesn't matter much. I only agreed to use an LTE femtocell because I'm having fiber 100/100 installed in about a month when it becomes available to us.  On my old DSL, not an option at 6meg down, 0.5meg up.

Not very happy with that licensing crap...I was under the impression that Sprint had the B41 spectrum by the reigns for the most part. But apparently i'm in one of those areas where they don't.

Your post are what brought me back here. I am apparently in a coverage blackhole. i am very unhappy with the service I receive from sprint at this time. roughly 6 weeks ago I was very happy, was able to run my business from home and my kids who are homeschooled could actually have school AT HOME

Link to comment
Share on other sites

2 hours ago, jonathanm1978 said:

You might want to look over my posts in the last month or 2...I've had to deal with the exact same thing. Chances are, you're in the same type of area that I am in...where they allowed MB to work, then discovered they didn't have the proper licensing for it to operate. I'd be ready to get some return boxes ...they are probably gonna want you to send the MB units back. 

I just got the S1000 femtocell yesterday...I vowed after the Airvana 2.5 that I wouldn't have another femtocell (charged for data from ISP, just to use that same data on my phone and get charged again)...but with unlimited it doesn't matter much. I only agreed to use an LTE femtocell because I'm having fiber 100/100 installed in about a month when it becomes available to us.  On my old DSL, not an option at 6meg down, 0.5meg up.

Not very happy with that licensing crap...I was under the impression that Sprint had the B41 spectrum by the reigns for the most part. But apparently i'm in one of those areas where they don't.

How do you like your S1000? Would you mind posting a couple photos of it?

Link to comment
Share on other sites

I am in Prattville AL, just North of Montgomery. Had 3 magic boxes so far. Receive the 1st in February of 2018, Second in August 2018 and the 3rd (MB Gold) in January 2019. Worked great up until about February of this year. Was listed as an available site area until March 2019. Speeds were decent, 20 down and 8 up. Now the network is unusable at best. Band 25 was consistent and usable. No matter where in my home I put the MB, it grabs a very weak band 41. This results in 1-2MB down and 5-7Kb up. Have called the MB support line and have an open ticket with engineering. NO help whatsoever. Keep getting told ONLY that I am not in a serviceable area. VERY frustrating. This is the only, or was, my only option for home internet. I have 4 phones and 1 mifi device connected to the MB and now it is unusable at best
My parents have the same issue. The MB used to stick to B25 and work fantastic. Then at some point they started really making it prefer B41, so it latches onto a -127 B41 signal and will not let go. It actually gets 0 throughput on it.

I talked to the MB engineering team, and they said that while they can technically lock it to B25, that it won't persist past a reboot and they'd have to do it again. So they wouldn't even do it once.

The only solution I've found is to factory reset, and basically put your body over the MB to attenuate the signal while it does the initial connection, so it can't even see B41. Once it's connected, you can move it to the correct position and it will stay on B25 for anywhere from a few days to several weeks, before the process needs to be repeated.

For home internet via LTE, if you can get an AT&T signal and are open to buying some equipment (modem, possibly a router, and antennas), there is a solution that works and might be faster.

Sent from my Pixel 3 XL using Tapatalk

  • Like 3
Link to comment
Share on other sites

14 minutes ago, ingenium said:

For home internet via LTE, if you can get an AT&T signal and are open to buying some equipment (modem, possibly a router, and antennas), there is a solution that works and might be faster.

 

14 minutes ago, ingenium said:

This is the only, or was, my only option for home internet. I have 4 phones and 1 mifi device connected to the MB and now it is unusable at best

Get your gear here.

https://ltefix.com/

I do most of my shitposting here these days.

https://www.facebook.com/groups/LTE.HACKS/ 

Link to comment
Share on other sites

So, my parents are moving from the home I grew up in down in southern Virginia to a home near Pond Bank, PA, which is in the Shentel region.  While they were there over the weekend to close on the new house, my mom apparently noted poor cell reception.  I told my parents there were solutions which I would work out for them, but that didn't stop my dad from calling Sprint who is now shipping them a Magic Box, which as we know, is not approved for use in the Shentel region.

AIRSPAN MAGIC BOX GEN 3

I had been planning to try to get them an Airave.  Am I correct that this device will not act as an Airave does, and will need to be returned to Sprint after it arrives?

- Trip

Edited by Trip
Pond Bank, not Pond Band.
Link to comment
Share on other sites

3 hours ago, Trip said:

So, my parents are moving from the home I grew up in down in southern Virginia to a home near Pond Band, PA, which is in the Shentel region.  While they were there over the weekend to close on the new house, my mom apparently noted poor cell reception.  I told my parents there were solutions which I would work out for them, but that didn't stop my dad from calling Sprint who is now shipping them a Magic Box, which as we know, is not approved for use in the Shentel region.

AIRSPAN MAGIC BOX GEN 3

I had been planning to try to get them an Airave.  Am I correct that this device will not act as an Airave does, and will need to be returned to Sprint after it arrives?

- Trip

iirc, there now some parts of Shentel that support Magic Boxes

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...