Jump to content

VZW Equipment spotting


RAvirani

Recommended Posts

  • 1 month later...

I found Verizon M-MIMO equipment installed on utility poles over in New Albany, IN this morning. Both of these are waiting on electric meter to be installed. 64227f49a8eee53c3b931f9e39dd8721.jpgaa3b1484ec8b5e99b4965a67c2fb1f80.jpg93f627406556eb222bd2cb16b5d668fc.jpg

Sent from my SM-G965U using Tapatalk

  • Like 1
Link to comment
Share on other sites

On 11/22/2019 at 5:46 AM, red_dog007 said:

The only 5331 I am seeing is 37-40GHz. 

Also didn't think m-mimo as a thing yet in mmwave. 

Air5121 is the correction.

 

- Oh yes it very much is. All current mid high band 5GTF and NR 5G deployments use M-MIMO antennas. 

sCZBbDf.png

MVsfMBu.png

  • Like 5
Link to comment
Share on other sites

  • 3 weeks later...
19 hours ago, Brad The Beast said:

It's funny how much equipment differs from region to region. AT&T is the same way. 

Link to comment
Share on other sites

Found a new Verizon site in Seattle that uses JMA antennas. This is the first non-Amphenol site I've seen Verizon build here in at least a year and a half. 

https://imgur.com/a/HyHl578

Pretty much all other Verizon sites utilize 2x6-port antennas or a single 8 port antenna manufactured by Amphenol. Info on those here:

https://s4gru.com/forums/topic/7691-vzw-equipment-spotting/?do=findComment&comment=546650

https://s4gru.com/forums/topic/7691-vzw-equipment-spotting/?do=findComment&comment=546778

I wonder if Verizon will be primarily switching over to JMA here or if this site is a one-off. The currently deployed Amphenol antennas have pretty exceptional lowband range; I'd be surprised if JMA has built antennas that can top them. 

  • Like 1
Link to comment
Share on other sites

2 minutes ago, RAvirani said:

Found a new Verizon site in Seattle that uses JMA antennas. This is the first non-Amphenol site I've seen Verizon build here in at least a year and a half. 

https://imgur.com/a/HyHl578

That top rack looks sleek af in black. If only we could get more of this. 

Link to comment
Share on other sites

Posting this here as I assume it's Verizon..... In the pic the round cylinder out the top back have been installed on light poles in our area for a couple of years now. Recently the triangle of panels started showing up on the same poles that had the cylinder ones. Anyone know what the triangle ones are?

IMG_20191215_140827.jpg

Link to comment
Share on other sites

4 hours ago, bmoses said:

Posting this here as I assume it's Verizon..... In the pic the round cylinder out the top back have been installed on light poles in our area for a couple of years now. Recently the triangle of panels started showing up on the same poles that had the cylinder ones. Anyone know what the triangle ones are?

IMG_20191215_140827.jpg

The top radios and the can antenna look just like what AT&T is deploying here for their small cells. 

Link to comment
Share on other sites

  • 4 months later...
On 5/1/2020 at 2:13 PM, mdob07 said:

Found this today on a Verizon site while looking for something else. Is this a mid-band Massive MIMO unit? 



 

No.

That's just one of the standard ERICSON airs with passive antenna ports available. Same deal type of equipment tmobile uses.

Vzw and ATT use Ericsson airs in some region and not in others. It really depends.

Sent from my Pixel 3 using Tapatalk
 

  • Like 2
Link to comment
Share on other sites

1 minute ago, lilotimz said:

No.

That's just one of the standard ERICSON airs with passive antenna ports available. Same deal type of equipment tmobile uses.

Vzw and ATT use Ericsson airs in some region and not in others. It really depends.

Sent from my Pixel 3 using Tapatalk
 

Thanks, Its different than what they normally use here, but it didn't look new either so I wasn't sure. 

Link to comment
Share on other sites

1 hour ago, mdob07 said:

Thanks, Its different than what they normally use here, but it didn't look new either so I wasn't sure. 

Yeah it really, really depends on the regional RF team.

 

Up in the west coast, ATT and VZW prefers all RRUS + Passive antenna builds. In other regions they'll toss in some Ericsson AIR or even other vendor antenna integrated w/ radio units.  

Link to comment
Share on other sites

  • 11 months later...
2 hours ago, PedroDaGr8 said:

A couple pictures of some painted Ericsson StreetMacro 6701 28GHz (n257) panels installed by Verizon in Kirkland, WA. I can get some better pictures if anyone wants them. 

n261, actually. n257 is overseas.

Link to comment
Share on other sites

  • 10 months later...

I believe I found some Verizon C-Band gear this week. I'm surprised by how fast they are deploying these here unless they aren't as affected by electronic equipment shortages as others are. I thought they'd focus on markets were C Band is already live. Louisville isn't one of the early clearing markets, I'm pretty sure they can't turn it on here until late 2023 unless I missed something. This particular site was actually just a bit south of Louisville, next to a Pilot station off I-65. There's another site about a mile south of this one that also has C Band equipment already. Both looked to have been complete rip and replace of the existing equipment as well. Also I'm not quite sure what the smaller unit is under the Ericsson 6449, unless that's for CBRS. (Pictures are from my S22 Ultra, I'm very impressed with the camera.)

WN9CSdO.jpg

7Vv5lfl.jpg

Link to comment
Share on other sites

Likely due to agreements VZW is making with satellite businesses to move them a long quicker.  I was just reading an article that SES entered into an agreement with VZW to install filters at 500 sites before the end of 2022.  VZW will pay them up to a cool $170M for their efforts.

As a byproduct of this work, I wonder if some of AT&Ts spectrum will also get cleared earlier.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...