Jump to content

Dual Band MIMO deployment


Recommended Posts

With Sprint's main antennas being dual band, broadcasting 1x/LTE on 800MHz and 1x/3G/LTE on PCS, what is the MIMO configuration of LTE?

 

I'm assuming that it is only 2x2 MIMO for both PCS and 800Mhz.  Are the antenna's able to handle 4x2MIMO for both 800/PCS and still broadcast 1x/3G?

Link to comment
Share on other sites

With Sprint's main antennas being dual band, broadcasting 1x/LTE on 800MHz and 1x/3G/LTE on PCS, what is the MIMO configuration of LTE?

 

I'm assuming that it is only 2x2 MIMO for both PCS and 800Mhz. Are the antenna's able to handle 4x2MIMO for both 800/PCS and still broadcast 1x/3G?

2x2 mimo for both. 2x2 mimo permanently for 800. 4x mimo possible in future for 1900 but not a priority.

 

Sent from my Nexus 5

  • Like 2
Link to comment
Share on other sites

Thanks!

 

Is 4x2 possible on PCS if 3G or 1x gets dropped?

 

I guess Sprint has a ton of BRS, but you'd think that deploying 4x2 on their tiny 5x5MHz LTE blocks would be top priority.

Is edge-of-cell performance important on PCS LTE when you have 800? Not really.

 

 

Sent from my iPhone 6+

Link to comment
Share on other sites

I guess Sprint has a ton of BRS, but you'd think that deploying 4x2 on their tiny 5x5MHz LTE blocks would be top priority.

 

How spoiled has the wireless world become that 5 MHz FDD is deemed "tiny"?

 

AJ

  • Like 4
Link to comment
Share on other sites

2x2 mimo for both. 2x2 mimo permanently for 800. 4x mimo possible in future for 1900 but not a priority.

 

Sent from my Nexus 5

 

I think it may have been mentioned in the past, but what would need to be done to enable 4x mimo on 1900?

Link to comment
Share on other sites

Is edge-of-cell performance important on PCS LTE when you have 800? Not really.

 

 

Sent from my iPhone 6+

Edge of cell performance is important regardless of the band being used.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

Thanks!

 

Is 4x2 possible on PCS if 3G or 1x gets dropped?

 

I guess Sprint has a ton of BRS, but you'd think that deploying 4x2 on their tiny 5x5MHz LTE blocks would be top priority.

 

I think it may have been mentioned in the past, but what would need to be done to enable 4x mimo on 1900?

 

Antennas that support it. 

  • Like 1
Link to comment
Share on other sites

Antennas that support it. 

 

So the current RRUs and base station equipment wouldn't have to be changed for B25? I assume these antennas are available today (if they wanted them).

 

And what prevents it on B26? Got to ask that out of curiosity...

Link to comment
Share on other sites

So the current RRUs and base station equipment wouldn't have to be changed for B25? I assume these antennas are available today (if they wanted them).

 

And what prevents it on B26? Got to ask that out of curiosity...

 

Nope. 4x MIMO capability is baked in from the getgo for Samsung, newer Ericsson RRUS31, and the non panasonic ALU based PCS RRHs. 

 

You need 4 active transmit antennas for 4x MIMO or in simplified terms each "antenna" has 1 port and on the antenna 2 ports are utilized for CDMA and 2 ports for LTE.  

 

For the low frequency band it's a physical hardware thing on both antenna and radio. It's most likely something to do with the lower band frequency itself as recent Vzw/ATT Band 13/12/17 rrus are 2T2R / 2x MIMO as well including tmobile utilizing off the shelf RRUS11 B12s and some other 2x2 MIMO rru for nokia land. 

  • Like 1
Link to comment
Share on other sites

Nope. 4x MIMO capability is baked in from the getgo for Samsung, newer Ericsson RRUS31, and the non panasonic ALU based PCS RRHs. 

 

Since I live in ALU land I'll need to look through the spotting thread to figure out the non panasonic equipment. I think they are fairly well mixed around here.

 

 

You need 4 active transmit antennas for 4x MIMO or in simplified terms each "antenna" has 1 port and on the antenna 2 ports are utilized for CDMA and 2 ports for LTE.  

 

If I understand it correctly, an antenna can transmit (and receive) multiple carriers. It is an RRU limitation that results in the high capacity sites correct?

 

 

For the low frequency band it's a physical hardware thing on both antenna and radio. It's most likely something to do with the lower band frequency itself as recent Vzw/ATT Band 13/12/17 rrus are 2T2R / 2x MIMO as well including tmobile utilizing off the shelf RRUS11 B12s and some other 2x2 MIMO rru for nokia land. 

 

Got it. Thanks. :tu:

Link to comment
Share on other sites

My understanding is that going from 2T to 4T effectively doubles the spectrum bandwidth. So 5MHz on 2T is ~38Mbps, 5MHz on 4T is ~76Mbps.

4 antennas on the UE are required in order to get double the potential speeds.

 

Sent from my Nexus 5

Link to comment
Share on other sites

For the low frequency band it's a physical hardware thing on both antenna and radio. It's most likely something to do with the lower band frequency itself...

 

Likely, too big.  The lower the frequency, the longer the wavelength, the larger the antenna.  A 4T4R 800 MHz antenna might be the size of a refrigerator.

 

AJ

Link to comment
Share on other sites

Likely, too big. The lower the frequency, the longer the wavelength, the larger the antenna. A 4T4R 800 MHz antenna might be the size of a refrigerator.

 

AJ

AJ, that's a massive antenna:

f603b445032f0c0b6ee680a629a8dabb.jpg

 

 

Sent from my iPhone 6+

  • Like 5
Link to comment
Share on other sites

  • 3 weeks later...

The question is will Sprint add 4x2 mimo in the TDD 2.5ghz LTE band?

 

The answer is yes.  And we have plenty of 8T8R discussion in the sponsor, Premier, and Honored Premier sections.

 

AJ

Link to comment
Share on other sites

Does anyone have a time-line on when MIMO/8T8R will be turned on? I'm much more excited about this than carrier aggregation.

If sprint 2.5 sites are online then they're already running 8t8r since 8T8R is the description of the antennas themselves (8 transmit / 8 receive antennas via 8 jumper cables to the radio).

 

Initially they are running 2x2 dynamic open loop mimo (tm3). activation of second carrier changes this to 4x2 mimo using tm8 beamforming.

 

Sent from my Nexus 5

  • Like 3
Link to comment
Share on other sites

4x mimo possible in future for 1900 but not a priority.

Some markets (particularly in Ericsson territory) saw quite a few 2.5 permits filed 2H 2014 which were approved but never actually built out. Many of those have been rapidly re-filed in 1H 2015 with the addition of RRUS 31 swapout and second set of PCS antennas. The additional antennas don't really make sense as being necessary for a second carrier, nor do they make sense as being for >3-sector sites with having the same azimuth.

 

They only really make sense as being either for higher order MIMO or for getting more antenna elements in the air to improve the B25 uplink when inter-carrier aggregation launches.

 

fm2deWp.png

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...