Jump to content

iPhone 6 and iPhone 6 Plus User Thread


COZisBack

Recommended Posts

He made another video of him bending the 6+ to prove it wasn't a fake.

 

I don't see why this is such a big problem. When you bend an object... it bends. And if it's a metal, it doesn't return to it's original form. Is this not common knowledge?!
  • Like 7
Link to comment
Share on other sites

You have to wonder if he's heating the phone up to epic proportions ahead of time to weaken the structural integrity, thereby making it easier to bend for his videos.

 

 

Sent from my iPhone 5S using Tapatalk

Link to comment
Share on other sites

You have to wonder if he's heating the phone up to epic proportions ahead of time to weaken the structural integrity, thereby making it easier to bend for his videos.

 

 

Sent from my iPhone 5S using Tapatalk

Even if he is who cares. I don't ever heat my phone and then bend it. I don't ever sit on my phone or put it in any weird positions so I doubt I'm going to have issues with mine bending. And if I do Apple will replace it for me or I'll pay for my replacement using Applecare. Problem solved for me. No need to stress over it how most people have.
  • Like 4
Link to comment
Share on other sites

He's milking the fame. Samsung and other competitors probably paid him to do this.

 

The phone is fine. Here.

 

http://www.consumerreports.org/cro/news/2014/09/consumer-reports-tests-iphone-6-bendgate/index.htm

 

 

Sent from my iPhone 6 on Crapatalk

  • Like 5
Link to comment
Share on other sites

The people who bent the phones- had put the phones into the change pocket which sits at the top inside of the right pocket typically. This is very dumb anyways. It's right at the bend when you sit. I did this a few times with my 5c - which I knew could nearly be run over. I'll probably get the otter box defender myself because I drop my phone too much.

  • Like 3
Link to comment
Share on other sites

Just for the iPhone guys.

 

Whenever you connect to band 41 check out the plmnid and the number of TX antennas.

 

Old clear equipment will broadcast 2x2 Mimo on 311-490/870 while sprint will broadcast 4x2 mimo on 310-120 which means the number of TX antennas that'll show on your engineering screen will be 4.

 

That'll be the easiest way to identify if you're connected to the new 2.5 Equipment for the iPhone ppl.

 

Sent from my Nexus 5 using Tapatalk

Thanks for the tip - this'll make confirming towers that much easier for us iPhone guys.

 

Here is the Clear B41 site by my house. The Tx Antenna # is 2:

ac0d95b081d7bcc9d1712ff64d789550.jpg

Link to comment
Share on other sites

Has anyone had any experience with the iPhone 6 and 1x800? Will it switch to 1x800 easier than previous models? I ask because my wife has an iPhone 5 and she works in a concrete building. With her 5 she doesn't get reliable signal on 1900 and so calls and texts won't go through. But there is just enough signal where it won't switch over to 1x800.

 

I tested at her work with my phone on 1x800 and it worked just fine so if she could get 1x800 she wouldn't have any issues.

 

So if she upgraded to a 6 would it work better on 1x800 than the 5 does? Thanks!

Link to comment
Share on other sites

Just for the iPhone guys.

 

Whenever you connect to band 41 check out the plmnid and the number of TX antennas.

 

Old clear equipment will broadcast 2x2 Mimo on 311-490/870 while sprint will broadcast 4x2 mimo on 310-120 which means the number of TX antennas that'll show on your engineering screen will be 4.

 

That'll be the easiest way to identify if you're connected to the new 2.5 Equipment for the iPhone ppl.

What if I'm on band 41 and that field is blank? My down/up bandwidth are both 20 MHz.

Link to comment
Share on other sites

What if I'm on band 41 and that field is blank? My down/up bandwidth are both 20 MHz.

iPhone Field Test is very cranky and sometime you have to close it and open it back up 1 or more times to finally get the fields to populate.

 

 

Sent from my iPhone 5S using Tapatalk

  • Like 1
Link to comment
Share on other sites

iPhone Field Test is very cranky and sometime you have to close it and open it back up 1 or more times to finally get the fields to populate.

 

 

Sent from my iPhone 5S using Tapatalk

It also gets stuck every now and then. I've seen "band 41, downlink: 8315 uplink: 26665." More than my 5s ever did.

 

 

Sent from my iPhone 6

Link to comment
Share on other sites

Has anyone had any experience with the iPhone 6 and 1x800? Will it switch to 1x800 easier than previous models? I ask because my wife has an iPhone 5 and she works in a concrete building. With her 5 she doesn't get reliable signal on 1900 and so calls and texts won't go through. But there is just enough signal where it won't switch over to 1x800.

 

I tested at her work with my phone on 1x800 and it worked just fine so if she could get 1x800 she wouldn't have any issues.

 

So if she upgraded to a 6 would it work better on 1x800 than the 5 does? Thanks!

From my experience no, my iPhone 6 was refusing to connect to 1x800 with even the slightest hint of PCS just like in previous iPhones. It'd be nice if Sprint/Apple finally fixed this!

Link to comment
Share on other sites

From my experience no, my iPhone 6 was refusing to connect to 1x800 with even the slightest hint of PCS just like in previous iPhones. It'd be nice if Sprint/Apple finally fixed this!

 

My educated guess is that the single RF path but lack of e/CSFB plays a significant role in the CDMA2000 band switching issue.  And that may explain why the iPhone receives separate PRLs.  If so, it is an Apple issue, not a Sprint issue.

 

AJ

  • Like 2
Link to comment
Share on other sites

My educated guess is that the single RF path but lack of e/CSFB plays a significant role in the CDMA2000 band switching issue. And that may explain why the iPhone receives separate PRLs. If so, it is an Apple issue, not a Sprint issue.

 

AJ

Has the lack of eCSFB been confirmed yet? One thing I've noticed is that with my previous iPhones it would take anywhere between 1.5 - 2 rings on the callers end for my phone to start ringing and with the iPhone 6 it starts ringing at the end of the first ring heard on the callers end. My nexus 5 with eCSFB starts ringing within the first ring heard on the callers end too.

Link to comment
Share on other sites

Picked up a tech 21 classic check case today for my 6. Really happy so far. Minimal bulk added but I feel it gives good protection and adds grip. Very happy.

 

 

Sent from my iPhone using Tapatalk

I highly recommend their cases. I used that on my iPhone 5s when I had it. It held the phone great, and I could easily remove it if I wanted it to go naked for the day. I usually would only install it when going to the gym and then take it back off when I got home. 

 

Great cases. Extremely durable.

Link to comment
Share on other sites

Has the lack of eCSFB been confirmed yet?

 

No.  But we will presume the status quo ante unless/until irrefutable evidence arises to the contrary.

 

AJ

  • Like 2
Link to comment
Share on other sites

 

 

The 1Gb of ram is plenty.. You gotta keep in mind your Android devices are running an operating system double the size of iOS 8. That's 4 GB versus 8gb in android. This is why they developed the kit kat version so they could run a leaner android better on devices with less ram while keeping the device running smoother. Kit Kat is still around 7 Gb in size.. This is why the Android Flag ship phones require more ram. I ran a Galaxy S4 against the 5s last year. The S4 has higher specs overall in areas like ram ( not the cpu of which the Apple A7 is very strong ). But the iphone was more reponsive and slowed down less when opening many programs the OS never hiccuped.. People try and compare specs but it's like comparing a pc running windows xp versus one running windows 7.. The computer running windows xp runs as fast -or faster- although it has 1/3 the ram and a slower cpu. Basically engineers use the hardware they require to push the software they are using on any given device. Bigger OS requires more ram and cpu to run as smoothly as a device running a much smaller operating system. Pls check out this iPhone 5s reviews which shows performance compared to top end Android phones: ( you can switch to next page of review at bottom of screen )

http://www.anandtech.com/show/7335/the-iphone-5s-review/5

No, bloatware infested skins the individual manufacturers pack in android are that large. 4.4.4 is about 3.5GB installed on its own and runs just fine on lesser hardware.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...