Jump to content

Network Vision/LTE - Phoenix Market (including Flagstaff, Prescott)


MaxPower

Recommended Posts

After lunch today, I was out in the parking lot and was texting my son-in-law when I got an error that the text did not go through. I noticed my signal bars were non-existent. I figured they were working on the tower or something. I launched SignalCheck Pro to see if I had any signal at all. Nothing. I went on about my work when I got an alert the I had not heard before. I looked at my phone and SignalCheck Pro showed I had 1XRTT 800! Of course I was in the middle of a task and couldn't get a screen shot. It was that way for only a minute or two and the next time I checked it was back to eHRPD.  

hopefully things are moving...

For those of us that don't work at the NSA where were you?

Link to comment
Share on other sites

The first LTE sites accepted in the Phoenix market.  Jump over to the Sponsor section for more details!  http://s4gru.com/index.php?/topic/590-network-vision-site-map-phoenix-albuquerque-and-tucsonyuma-markets/?p=186213

 

 

Robert

  • Like 4
Link to comment
Share on other sites

One site is on Camelback just East of 19th Avenue, and the second site is on Bell Road just East of 42nd Avenue.  More to come.  We are supposed to have about 25 up in the next 3-4 weeks. If cox would get off their @ss and do some work!

Link to comment
Share on other sites

The first LTE sites accepted in the Phoenix market.  Jump over to the Sponsor section for more details!  http://s4gru.com/index.php?/topic/590-network-vision-site-map-phoenix-albuquerque-and-tucsonyuma-markets/?p=186213

 

 

Robert

Hi Robert.  Some of us, like myself, don't have Sponsor forum access.  Can you post the info here?

Link to comment
Share on other sites

Hi Robert.  Some of us, like myself, don't have Sponsor forum access.  Can you post the info here?

 

Specific information about accepted sites is a feature for S4GRU Sponsors.  S4GRU is a not for profit site and we depend on member donations to keep our site online.  If you would like more information about how to become a S4GRU Sponsor, visit this link:  http://s4gru.com/index.php?/topic/1195-information-about-s4gru-sponsorship-levels-and-how-to-become-a-sponsor/

 

Robert

  • Like 2
Link to comment
Share on other sites

The tower on camel back is in the park n ride I was over there today had no lte had strong 3G but the speeds still sucked this is also a century link backhaul which is probably why it's done. We have been waiting on a certain cocky cable provider at a lot of sites. However like I said there are 20 to 30 sides scheduled in the next three weeks and roughly 27% of Phx in 3 months

Link to comment
Share on other sites

The tower on camel back is in the park n ride I was over there today had no lte had strong 3G but the speeds still sucked this is also a century link backhaul which is probably why it's done. We have been waiting on a certain cocky cable provider at a lot of sites. However like I said there are 20 to 30 sides scheduled in the next three weeks and roughly 27% of Phx in 3 months

 

I was just over there at the record store a few hours ago, and no LTE or 3G, just 1XRTT data. Site must be down for tuning, either that or it crumbled after people noticing LTE there.

 

I'll check back in a few days when i'm back over by there to see what the speeds are like.

 

Also, it does not surprise me Cox taking their good 'ol time, if it's anything like getting the DOCSIS nodes fixed in my last three neighborhoods fixed for over saturation, then we have a good long while to wait. I'll never give that company any of my money ever again after being forced to deal with them for so long. Glad where i'm at CenturyLink was able to do a 40/20 DSL line for me no questions asked

Edited by brad162
Link to comment
Share on other sites

I was just over there at the record store a few hours ago, and no LTE or 3G, just 1XRTT data. Site must be down for tuning, either that or it crumbled after people noticing LTE there.

 

I'll check back in a few days when i'm back over by there to see what the speeds are like.

 

Also, it does not surprise me Cox taking their good 'ol time, if it's anything like getting the DOCSIS nodes fixed in my last three neighborhoods fixed for over saturation, then we have a good long while to wait. I'll never give that company any of my money ever again after being forced to deal with them for so long. Glad where i'm at CenturyLink was able to do a 40/20 DSL line for me no questions asked

 

Cox been pretty good here in San Diego.  If wasn't for them, we be waiting on AT&T to deliver fiber and San Diego would be waiting on LTE.

Link to comment
Share on other sites

LTE is officially ONLINE!

 

That report is INCORRECT sir!

 

We have LTE! It broadcasted all the way from 19th Ave and Camelback until I reached 7th Ave and Camelback, going east.

 

What an awesome sight to see on my device!!!!!!!

 

Screenshot_2013_08_14_12_01_02.png

 

I ran a quick SPEEDTEST from inside my car at the intersection of Camelback and 19th Ave. This is what the results were:

 

Screenshot_2013_08_14_12_04_23.png

 

 

It's not like Chicago speeds yet, but it's a HUGE improvement!!!!! This is only the beginning.

 

4GLTE is officially confirmed in Phoenix!

  • Like 3
Link to comment
Share on other sites

Yes it is. I had glasses to get at Costco Spectrum Mall so decided to go south and map a little. On way home hit only a smidgen of 43 and Bell but there. Think i took a call and hit something to stop mapping. it is strong and there. i was getting around 20 down and 10 up. 

Ok whatever mall it is now , was Christown years ago then Spectrum I believe now? but Costco and Walmart are there both which is probably fun for them. 

At my house near the bell road area or within a handful of miles we miss calls in our house and just use wifi. If it doesnt improve with the buildout need whatever device for inside the house for calls.

But trying to let wife know once 4g kicks in the unlimited data when out of the house will be worth it. I told her it was at those two locations and she said skipping us as in funny but sarcasm. 

We missed grandfathering Verizon 4g or would be there, sorry. Plus wife does get a better work discount on Sprint. 

Edited by no_one
Link to comment
Share on other sites

Well 20 and 10 is what i have at home also. It was fast. Downloaded sensorly as had took it off phone and the download was quick. It just happened not a long wait or never like on 3g. Sorry son the app will not download just wait for the home wifi.

My speed test was my own and like all speed test varies. For me wow. Thing is someone with a better phone or better test will get much better true numbers.

I used it a little and it did just work period. Streaming video streamed. A couple apps just downloaded. That is all I care.

My test numbers are just mine alone. Some one else may do better or worse. I am happy the connection worked. 

That intersection is busy and it was noon time. So others should have been using it. 

Edited by no_one
Link to comment
Share on other sites

I hope it improve, thosee are pretty poor speeds for a tower that no one is using!

There wasn't a signal engineering screen with that speedtest so there's no telling. Plus I bet a bunch of people are using it since it is the only one around.

Link to comment
Share on other sites

I hope it improve, thosee are pretty poor speeds for a tower that no one is using!

 

We don't know what the signal strength was. It was likely a mid to low signal, which would produce those kinds of speeds. And realistically, those speeds will work fine for anything you need to do. 

 

Additionally, look two posts up, no_one is getting speeds of 20 down and 10 up, so I don't think there's anything to complain about.

Link to comment
Share on other sites

Ok I edited my other post. the signal was strong. the Camelback intersection was at noonish and it has smaller office buildings. They knew it or not others where using it. 43rd and bell is not that busy but still Bell road and hits a tiny bit of ASU west or seems to unless there is another tower testing. I must have stopped Sensorly when taking a call by accident. Only got a smidgen of what I meant too there. I downloaded sensorly as had deleted off phone. It just downloaded no wait just there. Another app the same. Streaming video worked. My speed test is mine alone. Want better do it. i am happy it just works for me an average person. 

Just 4g is in Phoenix. 

Link to comment
Share on other sites

I am picking up LTE on my phone in Downtown Phoenix. I just got 4.69 down and 0.49 up!

 

I am up 10 floors facing north.  Can I be picking up 19th Ave & Camelback?  

 

How do you post pictures?

 

Possibly, from that elevation it's fairly possible.

 

To post pictures, either post using the Tapatalk app, or use a hosting site such a Photobucket, Dropbox, or Imgur.

Link to comment
Share on other sites

Even to my dumb brain and end user dumb knowledge doubt it highly. Must be picking up something else. Another tower new or testing.  Oh I do know Phoenix geography . 

But I highly doubt it is 19th camelback as 3g near you say lock on me. 4g that far away ignore. I lost within a mile or so. Another stronger 3g took over. 

So maybe another site up or testing?

Edited by no_one
Link to comment
Share on other sites

Even to my dumb brain and end user dumb knowledge doubt it highly. Must be picking up something else. Another tower new or testing.  Oh I do know Phoenix geography so no. 

 

It's completely possible from 10 floors up. Each individual site can cover many miles, up to 10 miles (though in cities they tend to tilt the antennas down more severely to reduce the coverage area and increase capacity). Add in elevation, and you have near line of sight to the cell site, and it's completely possible to pick up a signal from that distance.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...