Jump to content

Marcelo Claure, Town Hall Meetings, New Family Share Pack Plan, Unlimited Individual Plan, Discussion Thread


joshuam

Recommended Posts

I hope so.

 

Sent from my SM-G955U using Tapatalk

For the initial rollout it may be a free for all. I think as more people have them in the same neighborhood, Sprint could get more picky on who gets one or not after that point.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

http://investorplace.com/2017/03/t-mobile-us-inc-tmus-needs-merge-sprint-corp-s/2/#.WRYPu9Tytkg

 

I posted link to this article because there is a paragraph in there that mentions that tmobile is not prepared for 5g because they lack the fiber necessary for I guess for small cell backhaul. Whereas, verizon and att are way ahead of tmobile and sprint in term of fibers. But Sprint has a way around this problem mainly because of the amount of spectrum it has but also sprint has been installing massive mimo.

 

Can anyone confirm if any of this is true?

That's a dumb article really. It's all over the place. Says they don't have fiber but Sprint has spectrum. It doesn't really say Sprint has fiber or that Sprints spectrum will be backhaul. TMobile uses unlicensed mmWave backhaul which can easily provide multiple Gbps.

 

Everyone is deploying MIMO equipment. Whether it's used right now or not doesn't really matter. Massive MIMO is different, and I'm sure everyone has this in the labs being tested.

Link to comment
Share on other sites

Has anyone received a call about the magic box yet?

 

 

Sent from my iPhone using Tapatalk

da hell is the magic box??

 

Reading through it looks like a beefed up air rave????  band 41 only?  Does it use your net connection, or grabs a weak cellular and enhances it??

Link to comment
Share on other sites

da hell is the magic box??

 

Reading through it looks like a beefed up air rave???? band 41 only? Does it use your net connection, or grabs a weak cellular and enhances it??

Works great, grabs signal from your local macro and gives me 100% coverage on my first, second and full basement.

 

My magic box, which is the first model works great!!!!

 

 

30ea74eaa7a1b4dbda8c76c723988e7b.jpgd31dac222facce1a9368fcc3d52374fd.jpg1d0c11a6de533c2530b91bdbdb406a97.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 4
Link to comment
Share on other sites

Is there any benefit of having the magic box over the upcoming Airave 3 if broadband internet is available at home?

 

Sent from my 2PYB2 using Tapatalk

airave will help if u need better voice but magic box data is sweet

And damn strong.... brought my signal from -108 at magic

Box to -70 to my devices, depending where in house!!!!

 

 

Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites

I got the call Tuesday evening. She said I was approved and it will be shipping in 8-12 weeks.

 

Sent from my SM-G955U using Tapatalk

I wonder if the call is from one place/area code or numerous places. I usually do not answer calls that I do not know the number but have since placing my order. And so far the calls coming in are not Sprint but telemarketers. arrgghh.

Link to comment
Share on other sites

I wonder if the call is from one place/area code or numerous places. I usually do not answer calls that I do not know the number but have since placing my order. And so far the calls coming in are not Sprint but telemarketers. arrgghh.

Mine came up Sprint on my caller id.

 

Sent from my SM-G955U using Tapatalk

  • Like 2
Link to comment
Share on other sites

What was the phone number or area code? Getting a ton of robo calls which I've ignored.

I corrected my post. It was Friday afternoon but it was the regular 1800 Sprint number.

 

Sent from my SM-G955U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Works great, grabs signal from your local macro and gives me 100% coverage on my first, second and full basement.

 

My magic box, which is the first model works great!!!!

 

 

 

 

 

Sent from my iPhone using Tapatalk

if you have wifi at the house, why would you want this?? doesn it just chew into data useage??

Link to comment
Share on other sites

if you have wifi at the house, why would you want this?? doesn it just chew into data useage??

And battery life.... on one band always in ur house and not flipping around all 3, tremendous effect in ur phone!!!!

 

I would get b26/b25 on first floor, b25/b41 on second floor with b26/3G in basement.

 

With the magic box, b41 on all levels of my house with no drops to 3G at all.... incredible on the phones battery life for u short and long term!!!!

 

 

Sent from my iPhone using Tapatalk

  • Like 3
Link to comment
Share on other sites

if you have wifi at the house, why would you want this??

 

To be a good wireless citizen, to help improve LTE signal for other users within a several hundred foot radius.

 

AJ

  • Like 8
Link to comment
Share on other sites

To be a good wireless citizen, to help improve LTE signal for other users within a several hundred foot radius.

 

AJ

 

 

Is the propagation of signal/square footage covered (Approximately 30,000 Square Feet Indoors and 100 Meters Outdoors) by the Magic Box greater than that from an 802.11ac Wi-Fi router?

Link to comment
Share on other sites

Is the propagation of signal/square footage covered (Approximately 30,000 Square Feet Indoors and 100 Meters Outdoors) by the Magic Box greater than that from an 802.11ac Wi-Fi router?

Yes it is, especially when all magic box is doing is repeating the cell signal and just using your electric power to do it.

 

Sent from my 2PYB2 using Tapatalk

  • Like 2
Link to comment
Share on other sites

Yes it is, especially when all magic box is doing is repeating the cell signal and just using your electric power to do it.

 

Sent from my 2PYB2 using Tapatalk

Is it a repeater? I thought it was broadcasting its own b41 carrier amd using a separate b41 carrier for backhaul to the tower. That is what I understood any way.

 

Sent from my LG-LS993 using Tapatalk

Link to comment
Share on other sites

Is it a repeater? I thought it was broadcasting its own b41 carrier amd using a separate b41 carrier for backhaul to the tower. That is what I understood any way.

 

Sent from my LG-LS993 using Tapatalk

That is what a repeater does. Wither it be radio or cell repeater.

 

Sent from my 2PYB2 using Tapatalk

Link to comment
Share on other sites

That is what a repeater does. Wither it be radio or cell repeater.

 

Sent from my 2PYB2 using Tapatalk

I thought a repeater took the same carrier that the macro tower uses and repeats ut? From my understanding the magic box is utilizing Sprint,s vast b41 holdings creatively.

 

Sent from my LG-LS993 using Tapatalk

Link to comment
Share on other sites

Why is sprint using its 2.5 to provide backhaul to these magic boxes? I heard sprint has been using microwave backhaul for many of its cell sites, why can't they do the same thing for these magic boxes instead of using 2.5?

Link to comment
Share on other sites

I thought a repeater took the same carrier that the macro tower uses and repeats ut? From my understanding the magic box is utilizing Sprint,s vast b41 holdings creatively.

 

Sent from my LG-LS993 using Tapatalk

You will be on 1 channel or set of channels while the magic box to cell link will be on the other, if both links are in same channels then you have a collision problem. Same way for radio repeaters have a input and output frequencies.

 

Sent from my 2PYB2 using Tapatalk

Link to comment
Share on other sites

You will be on 1 channel or set of channels while the magic box to cell link will be on the other, if both links are in same channels then you have a collision problem. Same way for radio repeaters have a input and output frequencies.

 

Sent from my 2PYB2 using Tapatalk

Maybe I dont have this right, but I thought that was exactly the problem with repeaters, that they cause interference it the werent used properly.

 

My understading is that if you had a building that had no signal in it they might install a repeater that would rebroad cast the same carrier to cover that indoor space that the macro tower was using. My understand of the magic box is that say you have a macro tower broad cast 3 carriers the magic box would broad cast a 4th to the end user and a 5 for use as backhaul. Is that not correct?

 

My understanding is repeaters can interfere with the signalbeing sent from the tower and the magic boxes can't. Sprint only has to worry about the magic boxes interfering with each other and they have developed network managment tools for that.

 

Sent from my LG-LS993 using Tapatalk

Link to comment
Share on other sites

I thought a repeater took the same carrier that the macro tower uses and repeats ut? From my understanding the magic box is utilizing Sprint,s vast b41 holdings creatively.

 

Sent from my LG-LS993 using Tapatalk

 

 

I think there's a bit of confusion about what a typical "booster" is versus one of the magic boxes.

 

A typical booster does exactly what you suggest--it boosts the signal on-frequency.  This can definitely cause interference problems for obvious reasons.

 

The magic box, by contrast, creates its own separate B41 carrier on separate spectrum, using the local macro for backhaul on its original frequency.

 

 

Why is sprint using its 2.5 to provide backhaul to these magic boxes? I heard sprint has been using microwave backhaul for many of its cell sites, why can't they do the same thing for these magic boxes instead of using 2.5?

 

 

Licensed microwave requires an outdoor antenna and, of course, a point-to-point license from the FCC including the coordinates of both end-points.  It would require additional antennas on the cell tower(s) as well.  Suffice it to say, significantly less trouble to use 2.5 GHz.

 

- Trip

  • Like 5
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...