Jump to content

Google Nexus 5 by LG Users Thread!


nexgencpu

Recommended Posts

I'm curious your profile says you are here for trolling? Are you trying to contribute or troll?

 

 

But the nexus should be made so that it does not degrade the performance of any user regardless of band, or carrier.

I am contributing, not trolling. I put that in my profile for humor, satire, etc. I was explaining why there could be update delays because of carriers.

 

The Nexus program is supposed to be free carrier influence, but that's not always the case, ie Verizon Galaxy Nexus.

 

Sent from my Nexus 5 using Tapatalk

Edited by MkVsTheWorld
Link to comment
Share on other sites

I am contributing, not trolling. I put that in my profile for humor, satire, etc. I was explaining why there could be update delays because of carriers.

 

The Nexus program is supposed to be free carrier influence, but that's not always the case, ie Verizon Galaxy Nexus.

 

Sent from my Nexus 5 using Tapatalk

Well As long as a carrier sells a phone , then the carrier will have a say in a phone. The nexus should only be sold through Google to keep it truly carrier influence free.

Link to comment
Share on other sites

Iptimes is a click bait site so do not post it. We know it's coming out early June. End of story.

 

Sent from my Nexus 5

 

We know for sure this now? Was there a credible leak or official post?

  • Like 1
Link to comment
Share on other sites

You know what AT&T tells me when I report poor LTE coverage at work? "Sorry, we cannot diagnose network problems on non-AT&T phones. "

That's the answer I get every time I call AT&T to report anything on the network. "Oh, I see the problem. You're using a non supported device. That's the problem." I get near irate when they say that.

 

I explain the issue is not the Nexus 5, and the problem is isolated to one sector on a specific tower. I can even give them the ATT Site ID # and the sector direction. But they refuse to open a ticket because they are certain it is the non supported device. I had one tell me if I was willing to upgrade to an AT&T supported device that they could help me. Even offered to ship me a subsidized device right there on the spot. No way I'm getting into another contract with anyone.

 

I have an official HTC 8X at home. So now I just slap my SIM card in it and call to report network issues. Still a pain in the ass though.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

  • Like 4
Link to comment
Share on other sites

I have a question for those of you using an att sim in your n5. Is it a nano sim, and if so how exactly do you go about putting it in? My sim card tray lacks the ability to hold a nano sim from what I can tell. I'm asking because I'm taking a trip to the middle of no where and I wanted to put my girlfriends att sim from her iPhone 5s into my n5(better reception and then I wont have to use an iPhone:P).

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

I have a question for those of you using an att sim in your n5. Is it a nano sim, and if so how exactly do you go about putting it in? My sim card tray lacks the ability to hold a nano sim from what I can tell. I'm asking because I'm taking a trip to the middle of no where and I wanted to put my girlfriends att sim from her iPhone 5s into my n5(better reception and then I wont have to use an iPhone:P).

 

Sent from my Nexus 5 using Tapatak

The nexus uses the micro sim if I remember correctly.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

I have a question for those of you using an att sim in your n5. Is it a nano sim, and if so how exactly do you go about putting it in? My sim card tray lacks the ability to hold a nano sim from what I can tell. I'm asking because I'm taking a trip to the middle of no where and I wanted to put my girlfriends att sim from her iPhone 5s into my n5(better reception and then I wont have to use an iPhone:P).

Sent from my Nexus 5 using Tapatalk

Yeah the nexus 5 uses micro Sim cards. You would need an adapter to turn it into a micro. Not sure how well they work. Prolly just easier to buy a micro Sim card.
Link to comment
Share on other sites

Yeah the nexus 5 uses micro Sim cards. You would need an adapter to turn it into a micro. Not sure how well they work. Prolly just easier to buy a micro Sim card.

I feel like itd be a bigger pain to swap her number to a micro sim and then back to her nano sim. Plus I really don't want to open up a line with them or one of their prepaid carriers. She's on a 40gb a month family plan so we'd like to just take advantage of that lol. Onwards on my search for an adapter then. Thanks for clarifying that for me. I figured someone would know xD.

 

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

For the next iPhone, Apple will use the grain of sand SIM.

 

AJ

  • Like 3
Link to comment
Share on other sites

That's the answer I get every time I call AT&T to report anything on the network.

Talking to an uneducated worker entrusted to do tech support is like talking to a dog -- it just looks at you with big eyes and nods.

 

AJ

  • Like 7
Link to comment
Share on other sites

Is there a easier way to write a prl to the Nexus 5? I thought having a Nexus was suppose to make things like this easier. I can write a prl to the G2 in 5 mins and the Nexus it just does not work. Can someone make a youtube video on this?

Link to comment
Share on other sites

Is there a easier way to write a prl to the Nexus 5? I thought having a Nexus was suppose to make things like this easier. I can write a prl to the G2 in 5 mins and the Nexus it just does not work. Can someone make a youtube video on this?

I'm away from my computer right now but later I can write a decent guide and give you everything you need.

 

Sent from my Nexus 5 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Thank you Spence just message me

I'm away from my computer right now but later I can write a decent guide and give you everything you need.

 

Sent from my Nexus 5 using Tapatalk

Sent from my Nexus 5 using Tapatalk

Link to comment
Share on other sites

Yeah just post it

 

Sent from my Nexus 5 using Tapatalk

 

Okay so I have posted the instructions below.  It looks much more daunting than it really is; the process is quite easy.  You should be able to download the supporting boot.img and QPST from the links provided.  If you guys want I can post my git repository link that has the boot.img I used, but it should be the same.  I tested this on my devices just now before sending it and have done this same method about five times- never had any problems.  Regardless, read my brief disclaimer before trying lol.  Good luck!

 

Any step with "Type: " refers to a command we are entering into the command prompt followed by enter.

 

---------------------------------------------------------------------------------------------------------------------------------------------

 

Please follow this guide to the letter.  I do not assume any responsibility or liability for what may happen to your device by attempting to modify your PRL, nor do I provide PRL's.  As the user you assume all responsibility and risks associated with this.  I also assume no risks for the 3rd party software used during this procedure.  Note this is the PRL flash procedure just for the Nexus 5 device.
 
Preparation Steps:
1. Download/install the Android SDK and have your six digit MSL number handy.
 
2. Find the Platform-Tools folder located in the SDK Directory.
ex: C:\Program Files (x86)\Android\android-studio\sdk\platform-tools
 
3. Be sure to have the Nexus 5 drivers installed and USB Debugging mode enabled. 
 
Unzip the image and place it INSIDE the platform-tools folder.
 
5. Download and install QPST 2.7 build 402.  DO NOT install build 422!  It is a fake that comes with a nasty accessory (trojan worm).  You should be able to find it on XDA- http://forum.xda-developers.com/showthread.php?t=2263391
 
6. DO NOT close the command prompt until we are entirely finished with the flash.
 
 
Lets get started:
1. In the platform-tools folder, hold shift and right click, then select "Open Command Window Here".
Note: The newly opened command prompt windows should reflect that we are in the platform-tools directory.
 
2. Type in the command prompt: adb devices
Note: You should now see a serial number appear.  This indicates that your devices drivers are installed and it is in USB debugging mode.  If you don't see your device's serial number, try reconnecting the device, using another USB cord, restarting the computer, reinstalling the drivers, checking to be sure USB Debugging is installed, etc.
 
3.  Type: adb reboot bootloader
Note: This will reboot your devices into Fastboot mode
 
4.  Type: fastboot boot boot.img
Note: You should see on the cmd line that this is downloading the boot.img.  Afterwards your phone will reboot normally.
 
5.  Type: adb devices
Note: We are verifying that our phone is still communicating with adb.  See the trouble steps in step 2 if you have any issues.
 
6. Type: adb shell
 
7.  Type: su
Note: You will have to allow superuser permissions on your phone at this point.
 
8.  Type: setprop sys.usb.config diag,adb
Note: You will not see any activity on the command prompt or phone after this step, but you should hear a should from your computer, if your volume is on, to signify that your computer is installing the diag drivers.
 
9. Open QPST Configuration
 
10. You should see that there are a couple active ports in QPST.  Highlight the one that has some number under the phone tab and has USB for the link.
 
11. In the menu bar: Start Client > Service Programming
 
12. Select your phone with your phone number and hit okay.
 
13. Go to the Roam tab and select "Read from phone".  You will then have to enter your MSL number.
 
14. In the Roam tab, look in the Preferred Roaming section and browse for your .prl file.  Select it and then click "Write to Phone"
 
15. Don't freak out... You should have gotten an error stating that your phone returned a permanent error and you will now notice that your phone does not have a signal.  Close out of QPST- don't save any changes. 
 
16. Type: adb reboot
 
17.  When your phone reboots check in the Settings>About>Status page to be sure that your PRL took.  Enjoy!
  • Like 6
Link to comment
Share on other sites

10. You should see that there are a couple active ports in QPST.  Highlight the one that has some number under the phone tab and has USB for the link.

 

I will say, that at first, QPST did not list any ports let alone the port my Nexus was connected on.  If that is the case, dont worry.  Simply click Add port to add it manually and then once you do that it will show up and you can continue on with the steps just the same.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...