Jump to content

Google Nexus 5 by LG Users Thread!


nexgencpu

Recommended Posts

I actually got b41 in Dallas ! On .15 and it connected randomly haha. I can't seem to find which method works best

From what I've noticed it will connect to b41 when b25 signal is weaker than the b41 signal.

 

Sent from my Nexus 5

 

 

Link to comment
Share on other sites

From what I've noticed it will connect to b41 when b25 signal is weaker than the b41 signal.Sent from my Nexus 5

I noticed when leaving the american airlines center I picked itbup, because it dropped the small cell signal, and picked up b41 and I didn't even notice! But I've picked it up randomly as well even with b25 in the -75 area
Link to comment
Share on other sites

I am sure it might have been mentioned but there are 232 pages to look through, does the Nexus 5 HD voice capable? Thanks.

Trying to get ideas for a new phone.

Yes it is. I haven't noticed any speaker issues, coming from EVO LTE I prefer speaker placement on N5 better.

 

Sent from my Nexus 5 using Tapatalk

 

 

  • Like 2
Link to comment
Share on other sites

To save everyone the trouble of clicking the link... The update isn't out yet and this is just Sprint saying "it's coming soon". Granted, hopefully "it's on its way" means that it is coming sooner than later.

  • Like 2
Link to comment
Share on other sites

 

Yeah, ummmmmm... that's not an update. That's the same thing that Sprint has been saying since the Nexus 5 was released. There are dozens of posts just like that all over that site. I wish I read JosefTor's post before I jumped out of my chair in excitement!

 

To save everyone the trouble of clicking the link... The update isn't out yet and this is just Sprint saying "it's coming soon". Granted, hopefully "it's on its way" means that it is coming sooner than later.

 

Sprint has been saying that in various ways since it was released just after Halloween. SprintCare gives the same response to anyone who asks on their website or Twitter every day, "It's on its way.. coming soon.. it will be rolled out shortly... early 2014...". I've also seen more than one response from @sprintcare over the past 2 months saying that the update is being rolled out now. That would be great, but it's not. My best guess is that they are thinking anything Spark = coverage question, not software update.

 

I am disappointed that every time someone asks Sprint about the software update, the rep's first response asks for their location. They should be minimally trained to at least realize folks are asking about a device software update, not a coverage issue. Your location does not have any effect on it. I think they just see "Spark" and go straight for the canned responses.

 

I want the update, but I don't have a problem with it not being released yet; the most specific timeframe Sprint has ever given is "early 2014". I interpret that as 1Q2014, so they've got 4 weeks left. I'd rather they wait and get it right instead of releasing something that is going to worsen the experience for everyone. Since it is a Nexus device, I'm curious if it will just be included as part of the next Google OTA, whenever it comes out. Google might not be willing to push out an update that will only be useful for Sprint customers.

 

-Mike

  • Like 3
Link to comment
Share on other sites

That's a good theory about releasing it with the next ota. They're probably thinking, "this update only applies to sprint customers. All the other (average) customers will be calling/emailing/tweeting support staff wondering what it does."

Link to comment
Share on other sites

Google might not be willing to push out an update that will only be useful for Sprint customers.

 

-Mike

They did with the LTE Nexus 7 and Verizon. It was the only nexus device to get an OTA and it only made the device useable on Verizon.

 

Sent from my Nexus 5 using Tapatalk

 

  • Like 1
Link to comment
Share on other sites

The last time I asked about the spark update, the chat rep told me they had no idea and were just basically waiting on Google. Then they offered to walk me through manually enabling bands 26/41, setting priority etc. They even took the time to explain how to find out what band I was connecting to via engineering screens. For a second I thought they might have been a s4gru member, it was kind of awesome.

 

Sent from my Nexus 5 using Tapatalk

 

 

  • Like 4
Link to comment
Share on other sites

The last time I asked about the spark update, the chat rep told me they had no idea and were just basically waiting on Google. Then they offered to walk me through manually enabling bands 26/41, setting priority etc. They even took the time to explain how to find out what band I was connecting to via engineering screens. For a second I thought they might have been a s4gru member, it was kind of awesome.

 

Like many other things in life, it all depends on who you talk to.. I have also spoken with some very knowledgeable Sprint folks in chat and on the phone. But I saw a question posted on Sprint's message board about a Google-purchased Nexus 5 tonight.. the response from the Sprint rep was that it cannot be activated on Sprint's network because it is a GSM phone. I could understand the confusion when the N5 was first released, but this was posted 2 days ago..   :wall:

 

-Mike

Link to comment
Share on other sites

They did with the LTE Nexus 7 and Verizon. It was the only nexus device to get an OTA and it only made the device useable on Verizon.

 

Great point, I hadn't thought of that! From what I read, Google was able to target that OTA to only push out if a Verizon SIM was active. So that shouldn't be a hurdle for the Sprint update.

 

-Mike

Link to comment
Share on other sites

Great point, I hadn't thought of that! From what I read, Google was able to target that OTA to only push out if a Verizon SIM was active. So that shouldn't be a hurdle for the Sprint update.

 

-Mike

I still say the Sprintcare folks on Twitter and their forums are bots. The Eliza of 2014.

Link to comment
Share on other sites

The last time I asked about the spark update, the chat rep told me they had no idea and were just basically waiting on Google. Then they offered to walk me through manually enabling bands 26/41, setting priority etc. They even took the time to explain how to find out what band I was connecting to via engineering screens. For a second I thought they might have been a s4gru member, it was kind of awesome.

 

Sent from my Nexus 5 using Tapatalk

 

Assuming the person that you talked to was somehow "in the know", Google waiting for the next OTA to push the Spark update is the only way I can possibly think that Sprint is waiting on Google.  Otherwise, it sounds like another of the "depends on who you talk to" type of misinformation.

 

 

Like many other things in life, it all depends on who you talk to.. I have also spoken with some very knowledgeable Sprint folks in chat and on the phone. But I saw a question posted on Sprint's message board about a Google-purchased Nexus 5 tonight.. the response from the Sprint rep was that it cannot be activated on Sprint's network because it is a GSM phone. I could understand the confusion when the N5 was first released, but this was posted 2 days ago..   :wall:

 

-Mike

 

I spoke to someone Saturday because the tower near my home would not allow me to call or make calls if I was connected to LTE (the phone won't drop to 1x to make the call, it simply sits at the "Dialing" screen), but worked fine on 3G.  Even though I explained that I'm able to make calls in other areas where LTE is present, I was told that there was "no reported problem like that on the network" and that I needed to get my phone checked for repair.  Further, she was adamant that Tri Band phones CAN use voice and LTE simultaneously, and that she was sure I had a hardware issue as the reason that it wasn't working (I never asked about doing both at once).

 

The kicker though was when she obviously noticed I had a Nexus 5, and then asked what handset I had.  When I told her, she asked me "How did you get that activated on Sprint?  That shouldn't work on our network."

 

:wall:

  • Like 3
Link to comment
Share on other sites

Ok if I am not worried about connecting to B41 until the

...

So far the N5 is a damn good phone,

At my desk at work the Note 2 hovered around - 109 to -111 most of the time. Hopefully Monday the N5 will do a little better.

Its 5-6 db better if you can trust the reading is calibrated. Transfer rate is very good.

 

Sent from Nexus 5

 

 

Link to comment
Share on other sites

I want the update, but I don't have a problem with it not being released yet; the most specific timeframe Sprint has ever given is "early 2014". I interpret that as 1Q2014, so they've got 4 weeks left. I'd rather they wait and get it right instead of releasing something that is going to worsen the experience for everyone.

 

-Mike

I also want the update, but it's not that urgent for me since the places I frequent barely even have the regular band 25. Heck, the only time I turn on LTE is when I'm visiting family in LA or visiting north-cental Orange county like Westminster or Anaheim. I'm not complaining, though, since thanks to S4GRU, I've seen the progress in the Sponsor maps.

 

As for the "early 2014" interpretation, I would hope it is 1Q2014, but I fear that their use of "early" can mean anywhere from January to the end of June. The upside is that LG got the G2 Spark update out to users, so the Nexus 5 may not be that far off. Until we get a hard date or OTA from Google, though, everything is pure speculation.

  • Like 1
Link to comment
Share on other sites

The Spark update for me probably won't make much of a difference as well. As long as I do a PRL update after a reboot or signal reset my phone has no issues connecting to B41. I'm expecting the same when B26 comes around. However I'm not sure how it will be once I leave the Orlando Market as I wasn't able to connect at all in Chicago a few months ago (but that was before I knew about the PRL trick)

Link to comment
Share on other sites

...I wasn't able to connect at all in Chicago a few months ago (but that was before I knew about the PRL trick)

The PRL trick doesn't help. At least in my experience with Chicago b41 towers. 

Link to comment
Share on other sites

The PRL trick doesn't help. At least in my experience with Chicago b41 towers.

You need to run .15

Then enable band 41 and set it as the priority before the prl trick works.

 

Sent from my Nexus 5 using Tapatalk

 

 

Link to comment
Share on other sites

You need to run .15

Then enable band 41 and set it as the priority before the prl trick works.

 

Sent from my Nexus 5 using Tapatalk

Yeah I've done it in that order and I've had no luck connecting. 

Link to comment
Share on other sites

.15 will work automatically once you are in an area with a higher b41 signal and lower b25 signal.

 

assuming the b41 site is accepting connections.

Edited by dedub
Link to comment
Share on other sites

/nod

 

its the profile update that changes the priorities.

 

prl update should not change any priorities, in my experience.

Edited by dedub
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...