Jump to content

Google Nexus 5 by LG Users Thread!


nexgencpu

Recommended Posts

Guest kamiller42

Anyone know how to get rid of the persistent voicemail notification?

 

I am using GV/Sprint integration and have no need for the VM notif from Sprint. (The GV VM notification works fine.) The Sprint notification always says "New voicemail (2)." I have stopped the dialer process and trying clearing its data, but the notification always comes back. It has also disappeared for a little while when I upgraded to Android 4.4.1 and 4.4.2.

 

I've heard of only 2 solutons to this problem:

1) Call Sprint and tell them to disable the phone #'s VM.

2) Modify some system files.

 

Are there any other solutions?

Edited by kamiller42
Link to comment
Share on other sites

Anyone know how to get rid of the persistent voicemail notification?

 

Call your Sprint voicemail and clear out all "new" messages.  Otherwise, deal with the persistent notification.  It is just an icon, not a problem.

 

AJ

Link to comment
Share on other sites

There's a setting in the Google voice app to show VM notifications in call log... Turn it off.

 

Sent from my Nexus 5 using Tapatalk

 

Yep, this is an important setting. Turn it off if you want to be be notified of voicemails, otherwise you get none.

Link to comment
Share on other sites

Guest kamiller42

I have cleared my voicemail box. The notification persists.

 

I want to keep the GV VM notification because a) it's accurate (I actually have VM waiting.), B) it integrates into the Android dialer nicely.

 

The Sprint VM indicator never goes away, even when VM box is empty.

Link to comment
Share on other sites

If you do what I suggested I promise a notification will stay appear in the status bar. I had all sorts of issues with the call log sprint VM indicator repeatedly notifying of deleted VMs and stuff. If you use Google voice then use it. Otherwise things get messy. So I would strongly urge trying my suggestion having someone call and leave a VM and then decide if it is an acceptable solution.

 

Sent from my Nexus 5 using Tapatalk

 

 

Link to comment
Share on other sites

Was curious as to how well the lte radio is compared to 3g and I'm very impressed. I'm out in the boonies today and This is my lte signal and 3g signal in the same place

https://www.dropbox.com/s/7ptxqdgpt8pp5kf/Screenshot_2013-12-21-18-34-50.png

https://www.dropbox.com/s/q9ufyi9cckkenx9/Screenshot_2013-12-21-18-31-22.png

 

Nice to be able to hold LTE when my 3g signal is so low. Also my sisters iPhone is parked on 3g while I'm enjoying LTE

Link to comment
Share on other sites

Thank you!!!

 

 

-Luis

Okay, so I compared my HTC One with the Nexus 5 screens and they are pretty much identical minus the status bar being different and the on screen home/back/recent apps.

 

P.S. picture was taken with my nexus 10, not the best with lighting focus. Both displays were set at the highest brightness levels. Hope this helps.

 

 

 

I can send an email of the picture. The upload isn't that clear.

Link to comment
Share on other sites

Okay, so I compared my HTC One with the Nexus 5 screens and they are pretty much identical minus the status bar being different and the on screen home/back/recent apps.

 

P.S. picture was taken with my nexus 10, not the best with lighting focus. Both displays were set at the highest brightness levels. Hope this helps.

 

 

 

I can send an email of the picture. The upload isn't that clear.

Yeah then I definitely have a problem with mines cause my N5 is nowhere as white as my One.

 

 

-Luis

post-1959-0-90952500-1387674784_thumb.jpg

Link to comment
Share on other sites

Ok guys I finally got my Nexus 5 in the mail today and I activated it.. The problem I am having now is that Sprint is not giving me my MSL number so I can turn on bands 26 and 41. They said that they can't release the info for lines still under contract, even if I did buy the phone outright. Any ideas?

Link to comment
Share on other sites

Ok guys I finally got my Nexus 5 in the mail today and I activated it.. The problem I am having now is that Sprint is not giving me my MSL number so I can turn on bands 26 and 41. They said that they can't release the info for lines still under contract, even if I did buy the phone outright. Any ideas?

The msl does not carrier unlock the device. You just got a bad rep on the phone. Start up an online chat, tell them you messed up the phone, had to factory reset it, and now it's asking for some "msl" code. They'll give it to you. If not, keep trying.

  • Like 1
Link to comment
Share on other sites

The msl does not carrier unlock the device. You just got a bad rep on the phone. Start up an online chat, tell them you messed up the phone, had to factory reset it, and now it's asking for some "msl" code. They'll give it to you. If not, keep trying.

Exactly what I did I told them I installed the latest Google update it screwed something up on my phone and I'm trying to do a factory reset and its asking for my msl

 

Sent from my Nexus 5 using Tapatalk

 

 

Link to comment
Share on other sites

Exactly what I did I told them I installed the latest Google update it screwed something up on my phone and I'm trying to do a factory reset and its asking for my msl

 

Sent from my Nexus 5 using Tapatalk

 

You can get your MSL quicker this way... I already had ADB installed so it only took seconds to snag:

 

http://forum.xda-developers.com/showthread.php?t=2530061

  • Like 1
Link to comment
Share on other sites

Loving mine N5 even more, especially after the 4.4.2 update. The camera quality really improved and the System volume is finally useable. And with Xposed + the modules, I got almost the same experience as my S4 (except not using Hololauncher on the N5). :)

 

And it's quite nice having both Sprint & T-Mobile at the same time b/c sometimes when I get shetty Sprint 3G, I'm able to fall back on fast T-Mobile 4G LTE and vice versa. :D

  • Like 1
Link to comment
Share on other sites

Speaking of swapping sim cards, I learned a few things recently.  If you are trying to activate a new domestic prepaid sim card, make sure your phone is in global mode before putting in the new sim.  It needs to be active on the gsm bands for the initial programming to take place.  It took me a while to activate an H2O wireless sim card because mine was set on LTE.  Without the global setting, it wasn't receiving the initial programming and the sim card wouldn't activate.   I just activated a PTEL prepaid last night, set it to global mode, and it activated in a matter of seconds.  

 

On a side note, anyone know how many times this little sim drawer can be popped out and not start falling out? 

  • Like 1
Link to comment
Share on other sites

 On a side note, anyone know how many times this little sim drawer can be popped out and not start falling out?

 

I noticed in a comparison review, the newer revision of the N5 improved the SIM tray so that it sits flusher with the bezel and is less prone to rattling around. I wonder if Google or LG realized a weakness with it and needed to address it due to an issue with it possibly falling out

Link to comment
Share on other sites

So how is everyone's luck in connecting to band 41? I know for a fact there is an active band 41 tower that I can see out my window (and confirmed on sprint's spark coverage maps) and my Nexus 5 won't connect to it. I set the band 41 as priority 1, 26 as 2, and 25 as 3. Is there something else I may be missing? or might it be the tower?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...