Jump to content

Samsung Galaxy S5 User Thread


LuisBOSS302

Recommended Posts

Noticed that if you shake my S5 and listen around the camera you hear something loose? I've read that it could be a bad camera, or something like the same issue that some Verizon S5 have? Anyone else have this rattle/shaking sound?

 

Sent from my SM-G900P using Tapatalk

Link to comment
Share on other sites

Noticed that if you shake my S5 and listen around the camera you hear something loose? I've read that it could be a bad camera, or something like the same issue that some Verizon S5 have? Anyone else have this rattle/shaking sound?

 

Sent from my SM-G900P using Tapatalk

I hear it on mine and I got it about 2 weeks ago on amazon

 

Sent from my SM-G900P using Tapatalk

Link to comment
Share on other sites

Noticed that if you shake my S5 and listen around the camera you hear something loose? I've read that it could be a bad camera, or something like the same issue that some Verizon S5 have? Anyone else have this rattle/shaking sound?

 

Sent from my SM-G900P using Tapatalk

 

 

I hear it on mine and I got it about 2 weeks ago on amazon

 

Sent from my SM-G900P using Tapatalk

 

This is apparently the focus mechanism and it "may" rattle some when the camera is not engaged (on).  When the camera is engaged (app open), it will go away as its doing its job.  Not all behave this way though from my internet readings and it is not an indication your camera is bad.  It did happen that my camera did that and I DID get the camera failed error twice, but that was perhaps a coincidence.

Link to comment
Share on other sites

This is apparently the focus mechanism and it "may" rattle some when the camera is not engaged (on). When the camera is engaged (app open), it will go away as its doing its job. Not all behave this way though from my internet readings and it is not an indication your camera is bad. It did happen that my camera did that and I DID get the camera failed error twice, but that was perhaps a coincidence.

OK thanks just didn't sound right, thanks.

 

Sent from my SM-G900P using Tapatalk

  • Like 1
Link to comment
Share on other sites

Got my replacement new device today and the camera rattles on this one too when the camera isn't engaged. FYI. Camera works well despite this. Placebo, I'm sure, but the reception seems slightly stronger with this device.

 

sent from an underwater dust storm with my S5

Link to comment
Share on other sites

Really like how the S5 tries to pick up B41 right away without doing anything to it.

 

But it'll stay on a fringe B41 signal even though there's a much stronger B25 signal available. Only thing that bothers me is that it switches from B25 to B41 and vice-versa so often. Probably a network issue in the area.

Link to comment
Share on other sites

I have a small niggle about my s5: the signal indicator bars are not calibrated correctly for lte. Anything less than -100db rsrp displays as only 1 bar. Since -100db rsrp is equivalent to -70 to -80db rssi my phone shows only 1 bar most of the time. It has a very negative psychological impact on perceived network quality.

 

Sent from my Nexus 7 using Tapatalk

Link to comment
Share on other sites

I have a small niggle about my s5: the signal indicator bars are not calibrated correctly for lte. Anything less than -100db rsrp displays as only 1 bar. Since -100db rsrp is equivalent to -70 to -80db rssi my phone shows only 1 bar most of the time. It has a very negative psychological impact on perceived network quality.

 

Sent from my Nexus 7 using Tapatalk

Agreed. I would suspect many Sprint noobs would complain immediately that they have no signal with the S5. However it's a very usable 1 bar. I hope they recalibrate this soon.

 

sent from an underwater dust storm with my S5

Link to comment
Share on other sites

My Verizon phone is calibrated much more realistically. So I don't think there is any reason sprint can't recalibrate it.

The VZW handset supports SVLTE. It may not even be displaying LTE signal via the "bars."

 

AJ

Link to comment
Share on other sites

The VZW handset supports SVLTE. It may not even be displaying LTE signal via the "bars."

 

AJ

I believe it is after the jellybean update. When I lose lte the number of bars displayed on 3g is higher than what was displayed in lte before the phone fell back to 3g. But I could be mistaken.

 

Sent from my SPH-L720 using Tapatalk

Link to comment
Share on other sites

Does anybody's phone ever just "forget" it has band 26 and just drops to 3g? Here's what I mean by that. Whenever I walk into my basement I know it will drop band 25, but sometimes instead of going to band 26 it will just drop to 3g. A quick radio cycle in the same spot and I'll be connected to band 26 at -108dbm. Anybody else experience something like that with this phone?

Link to comment
Share on other sites

Does anybody's phone ever just "forget" it has band 26 and just drops to 3g? Here's what I mean by that. Whenever I walk into my basement I know it will drop band 25, but sometimes instead of going to band 26 it will just drop to 3g. A quick radio cycle in the same spot and I'll be connected to band 26 at -108dbm. Anybody else experience something like that with this phone?

 

What PRL is on your phone?  (not that its the answer, just curious)  I'm PRL 51101.  I will see that I now jump on to B26 from B25 directly and it rarely goes to 3G.  If it does go to 3G, it'll hop back to LTE within a minute or two, unless it really can't see any B26 at all.  And this is in very spotty areas where I KNOW I will have weak signal.

  • Like 2
Link to comment
Share on other sites

What PRL is on your phone? (not that its the answer, just curious) I'm PRL 51101. I will see that I now jump on to B26 from B25 directly and it rarely goes to 3G. If it does go to 3G, it'll hop back to LTE within a minute or two, unless it really can't see any B26 at all. And this is in very spotty areas where I KNOW I will have weak signal.

51100. It doesn't happen all the time but I find my phone on 3g a lot when I take it out of my pocket whenever I'm out and about and maybe that's the reason
Link to comment
Share on other sites

Anybody know of any GS5 deals out there?

 

Ask and ye shall receive!

 

http://www.radioshack.com/category/index.jsp?categoryId=28426736

 

Edit: looks like that's contingent on a trade-in of a relatively new device for their buy back, so might not be much better than other buy back deals.  However, still attractive.

  • Like 1
Link to comment
Share on other sites

Ask and ye shall receive!

 

http://www.radioshack.com/category/index.jsp?categoryId=28426736

 

Edit: looks like that's contingent on a trade-in of a relatively new device for their buy back, so might not be much better than other buy back deals.  However, still attractive.

 

Yes, I saw that deal.  They wouldn't give me much for my current phone.

Link to comment
Share on other sites

Yes, I saw that deal.  They wouldn't give me much for my current phone.

 

Bought 2 S5's via Amazon, and they should be waiting for me at my house. Think they were $112 each. Going to sell my phones via Glyde. Based on what it looks like I can get from them, even after buying a Lifeproof I should be $40 or so ahead.

Link to comment
Share on other sites

If the store is smart they fix it. Its only held on by one screw and can be fixed in seconds. We harvest them off all gs5 that get sent back since its not a part sprint currently replenishes us with.

I took it to a local store. Said they wouldn't do it. Sucks. They said they haven't seen it happen yet.

 

Sent from my SM-G900P using Tapatalk

Link to comment
Share on other sites

I took it to a local store. Said they wouldn't do it. Sucks. They said they haven't seen it happen yet.

 

Sent from my SM-G900P using Tapatalk

I can see it being broke off but the store not fixing it? It's not that hard, a few minutes and boom fixed new door. it's not like the employee is going to have to either think or work for a hour to fix it. I mean with in 5 to 10 min he/she should have it done.

 

Sent from my Galaxy S5

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...