Jump to content

Air Rave Causing Excessive Battery Drain?


o_swas

Recommended Posts

Hi,

 

Does anybody here use an Air Rave?  If so, has it every caused undue battery drain on your phone?

 

My buddy and his wife have LG G2 phones.  After a recent firmware update (I think the one that enabled Spark) he noticed that when at home on wifi, the battery would drain 50% or more overnight while he was sleeping. 

 

He noticed that when he turned wifi off on his G2, the battery drain went away while he was at home. 

 

He was pretty sure it was the router since the battery drain only occurred when he was at home with wifi on.  So, he bought a new router.

 

He installed the new router last night.  His G2 was at 55% charge when he went to bed at 10:30 PM and 0% at 5:30 AM.  Not good.

 

So now he's wondering if the Air Rave is causing problems.  By process of elimination that pretty much has to be it.

 

Has anybody else had a similar experience with the Air Rave?  Did a new unit fix the problem or is it a firmware problem on the Air Rave?

 

Thank you!!

 

-Ryan

Link to comment
Share on other sites

I opened a thread about this a few weeks ago. My conclusion. It's both the airave and your phone due to complicated reasons I really don't understand or care because b26 is around the corner.

 

Temporary solution that WORKED at least for me: Turn off mobile data and use ONLY wifi. Something about turning of mobile data prevents my phone from constantly searching for a new tower which I assume is the culprit of battery drain. I often see it switching between the airave and the actual tower which provides me with a  whopping 1 bar when cellular data is on.

 

So, turn of mobile data at home. Try again. 

Link to comment
Share on other sites

I thought the Air Rave only provided voice service.  Does it also provide data services?  And why would your phone search for a tower if the Air Rave is right there?

 

Not doubting you, I'm just trying to make sense of it.

Link to comment
Share on other sites

I thought the Air Rave only provided voice service.  Does it also provide data services?  And why would your phone search for a tower if the Air Rave is right there?

 

Not doubting you, I'm just trying to make sense of it.

Excellent questions. Yes the airave provides data services. And to the rest of the questions....I searched and searched and searched for those answers as I had the same question. My only conclusion is that it is an issue with the airave and/or my iPhone. I only mention it because it appears that your friend might've experienced the same issue. I sat here one day and watched my phone drain 20% in less than 10 minutes. Then turned mobile data off the next day and my phone sat there for 3 hours and went down 1%.

 

Like I said. Complicated reasons I do not really understand. The only solution, since you use wifi while at home anyways, is to turn mobile data off. It worked for me on my 5S, and for everyone else in the house. 

Link to comment
Share on other sites

The G2 is a tri-band device. It prefers to connect only to LTE and to get its CDMA1x packets through CSFB. You will see battery drain when connected to an Airave because it is still searching for LTE. Try disabling LTE altogether.

  • Like 1
Link to comment
Share on other sites

I thought the Air Rave only provided voice service.  Does it also provide data services?  And why would your phone search for a tower if the Air Rave is right there?

 

Not doubting you, I'm just trying to make sense of it.

Yes it does search for other towers. Why is beyond me. If you can turn LTE off, and do a pro/profile update when using the airave, and when you leave do another. I've found doing that on an airave does help. Maybe a placebo effect.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...