Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

    • By jakeuten
      Just a bit of insight. I live near UMD in Duluth, MN. Sprint's signal is clearly much 'dirtier' with a 1.0 SNR compared to T-Mobile's 20.4 SNR. I don't have a screenshot from the same time, but I get about a 22 to 29 SNR with T. I know that AT&T uses RRU's but I'm not too sure about Sprint or T-Mobile. Also, I didn't even know they had L2500 where I live, but I force checked it on my Samsung S7 (AT&T). 


    • By S4GRU
      Did you know that with many Sprint (Uniband) LTE Android devices, the signal strength indicator at the top does not show your LTE signal strength? Even if 4G or LTE is displayed next to it?
       
      That's right!  This signal displayed here is your 1x (voice signal), and it is not your 3G EVDO signal strength, nor your LTE signal strength.  Regardless of whether it says 3G or 4G next to it. This is the cause of a lot of confusion.  Also, third party apps like NetMonitor do not show accurate LTE signal strengths. They also only show the 1x signal strength, even though they may reference being connected to LTE.
      The purpose of this thread is to help educate the masses, because many people think they have a strong LTE signal, when in fact they do not. And then they are unhappy, thinking that Sprint LTE is really slow, even with a strong signal. LTE performance is very signal strength dependent. So, when you have a weak signal, you can expect much slower than peak results.
       
      There is only one accurate way to get your LTE signal strength, and that is from your LTE Engineering screen in your Debug menu. And we will discuss the different ways to get that below.
       
      ...In HTC, Motorola & LG Sprint LTE devices:
      Go in to your phone app, and dial ##DEBUG# Select LTE Engineering Go down to RSRP. The number under RSRP shown in dBm is your LTE signal strength. ...In Samsung Sprint LTE devices:
      Go in to your phone app, and dial ##DEBUG# Enter 777468 for your lock code Select LTE Engineering Go down to RSRP. The number next to RSRP shown in dBm is your LTE signal strength. ...In the Galaxy Nexus, Nexus 5:
      Go in to your phone app, and dial *#*#DEBUG#*#* Enter 777468 for your lock code Select LTE Engineering Go down to RSRP. The number next to RSRP shown in dBm is your LTE signal strength. The LTE Signal Strength Scale:
       
      Now you have determined your actual LTE signal strength in dBms your device is receiving, you can use the following scale below to determine its strength:
      Better than -88dBm RSRP is a strong signal Between -89dBm and -96dBm is a very good signal Between -97dBm and -105dBm is good Between -106dBm and -112dBm is fair Worse than -113dBm RSRP is poor Feel free to link people to this thread for explanation. Hopefully, this will clear up some confusion out there!
       
       
    • By antilamr
      Some history first;
      Been through all the highs & broken promise Lows over the last 18 years with Sprint, currently have 7 lines. My main areas of concern are where I live and my retirement cabin which are in a semi Sprint dead zones.
      My Note3 will hold onto 3g for dear life. I have to toggle airplane mode to return to LTE signal (while standing in my back yard). Once I enter the house it drops to 3g. Speed test at 4g is slow at best.
      In my front yard it's 3g unless I walk into the center of the street, togle airplane mode then can pick up SLOW 4g again(until I walk to my front door.) i know note3 is missing band 41 which is suposto help.
      The wife's Iphone6 is 3g in my front yard, lte in the middle of the street and drops to 3g when entering our house also. When on 3g and walking into the back yard, airplane mode to froce it to 4g and it sticks to lte once you enter the house again. 1 to 2 bars, 17mb down with 1.3mb up. It will hold onto the lte signal.
      Does anyone have any insight to what I should expect with a Note5? Sprint has programed the system so if our 3g signal is stronger, my phone will want to stay there, Will carrier aggregation solve this problem or will the Note 5 try and hang onto the stronger 3g signal at all costs?
      I'm able to pre order the Note5 for $249 with a $200 SAMSUNG REBATE. Hate to get all excited and sign on for another 2 years if the Note5 will be doing what the note3 is doing. I get the whole ehrpd and 3g improving the cell phone experiance. At this point im more interested in being able to use more than the 5mb per month my 7 phones average and finally be able to use some of the unlimited data I've been paying for over the last 18 years. I'm in West Orange County, CA. and travel to the SAN Bernardino mountains weekly. Experts please chime in. On the fence to switch carriers but want Sprint to suceed and be there when they do!
    • By nexgencpu
      Hopefully we can finally start seeing some user feedback. So far so good! it is without a doubt the best device ive owned!!!
  • Posts

    • Sprint still hasn't finished El Paso?!? I know there are a few sites that haven't been touched in West Texas (SW of Monahans and between Van Horn and Fort Stockton), but if this site is in the immediate El Paso area, then this is just....😐.
    • Sure thing, let us know if you need help troubleshooting. They don't make a decent off the shelf model, and probably won't until whatever 5g is rolls out in 202?. These are probably the most comparative to off the shelf in price and function.

      Like building anything, do some reading, ask some questions and it should go pretty smooth.

      Sometimes they need a reset or a firmware upgrade, but that is something you will not get out of Netgear often; i.e. I use an unlocked AT&T branded mr1100 nighthawk. It has received a couple updates, but they don't do much to add functionality. It still camps on low bands, band selection or combinations are non existent, and it has a real fussy ethernet port. Cost me 200 bucks. I put together a 3 carrier capable modem and router for 249 and it does all of these things, and does not require carrier support for updates.

      I get regular firmware updates for both LTE modems(Telit, Sierra Wireless) and the routers(openWRT, ROOTer, modem manager). I am mesh networking a couple right now to boot. 
    • using a GS9 in London now. Spent the $25 for a week of high speed data. 5 days in and I'm almost at 2GB so for high data usage its better to go this way than keep open world. The main network for Sprint is O2. I think I connected to Vodafone once so far. I do have problems connecting once in a while and dropping to HSPA. Speeds are slow but I think this is due to not having all the bands on the GS9 and not having CA for the Bands I have. Haven't gone past 15Mbps download.    I also brought my Essential phone and put an EE sim card in. they are known as the biggest and fastest LTE network. They use band 7 which is also 2600mhz and when i connect to that and/or CA I've seen speed over 100mbps. on the glaxy on O2 I haven't seen faster than 15mbps
    • Oh I didn't know. But it's definitely Alcatel-Lucent in Boston. Also I think he's talking about in NYC, another Nokia/ALu market.
  • Recently Browsing

    No registered users viewing this page.

×