Jump to content

att bringing up lte cellular/pcs bands


dedub

Recommended Posts

http://gigaom.com/2013/11/07/att-begins-cannibalizing-its-2g-and-3g-networks-to-boost-lte-capacity/

 

 

 

 

As Milanovic’s screenshot shows, AT&T has a 5 MHz-by-5 MHz network running in the 1900 MHz PCS band — band 2 is PCS — which previously contained only HSPA and GSM signals. Commercial devices are already connecting to the network.

 

Link to comment
Share on other sites

Seems like AT&T is just adding capacity rather than boosting speeds a ton. But doesn't having this many bands become confusing for them?

I wouldn't say it would make things confusing for them, considering they have always had PCS spectrum, but it was always used for 2G/3G. So adding that extra LTE band of PCS probably doesn't affect them very much.

Link to comment
Share on other sites

AT&T also has some spare 700MHz spectrum they can throw at the problem. Bands A, D and E have not been touched yet. 850Mhz as well. The WCS band will not be needed for a long, long time.

Yes and no.  AT&T has no Lower 700 MHz A block spectrum.  Avoided it like the plague -- for technical and/or political reasons.  And the Lower 700 MHz D/E block spectrum is unpaired, so it is not really useful yet.

 

AJ

Link to comment
Share on other sites

Yes and no.  AT&T has no Lower 700 MHz A block spectrum.  Avoided it like the plague -- for technical and/or political reasons.  And the Lower 700 MHz D/E block spectrum is unpaired, so it is not really useful yet.

 

AJ

 

You're right about Block A. Verizon tried to sell it but had no takers in the urban areas so they decided to keep it. As far as D&E block can be used as a supplemental downlink for PCS.

Link to comment
Share on other sites

As far as D&E block can be used as a supplemental downlink for PCS.

 

No equipment supports that carrier aggregation.  So, as I stated, the spectrum is not really useful yet.

 

AJ

Link to comment
Share on other sites

Could Sprint customers ever roam on AT&T's 1900 LTE if there were a roaming agreement in place? This isn't a "will it ever happen" type of question. I'm just wondering if its possible.

Yes it is technically possible. I saw my phone scanning C Spire LTE in the standard PCS block, it wouldn't authenticate. C Spire roams on Sprint's LTE.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Fury Gran Coupe (My First Car - What a Boat...)
    • Definite usage quirks in hunting down these sites with a rainbow sim in a s24 ultra. Fell into a hole yesterday so sent off to T-Mobile purgatory. Try my various techniques. No Dish. Get within binocular range of former Sprint colocation and can see Dish equipment. Try to manually set network and everybody but no Dish is listed.  Airplane mode, restart, turn on and off sim, still no Dish. Pull upto 200ft from site straight on with antenna.  Still no Dish. Get to manual network hunting again on phone, power off phone for two minutes. Finally see Dish in manual network selection and choose it. Great signal as expected. I still think the 15 minute rule might work but lack patience. (With Sprint years ago, while roaming on AT&T, the phone would check for Sprint about every fifteen minutes. So at highway speed you could get to about the third Sprint site before roaming would end). Using both cellmapper and signalcheck.net maps to hunt down these sites. Cellmapper response is almost immediate these days (was taking weeks many months ago).  Their idea of where a site can be is often many miles apart. Of course not the same dataset. Also different ideas as how to label a site, but sector details can match with enough data (mimo makes this hard with its many sectors). Dish was using county spacing in a flat suburban area, but is now denser in a hilly richer suburban area.  Likely density of customers makes no difference as a poorer urban area with likely more Dish customers still has country spacing of sites.
    • Mike if you need more Dish data, I have been hunting down sites in western Columbus.  So far just n70 and n71 reporting although I CA all three.
    • Good catch! I meant 115932/119932. Edited my original post I've noticed the same thing lately and have just assumed that they're skipping it now because they're finally able to deploy mmWave small cells.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...