Jump to content

OUTDATED: BTA's Not Meeting FCC Minimum Service Mandates


S4GRU

Recommended Posts

NOTE: This thread is outdated. Protection Sites are no longer being deployed since Sprint and Clearwire have both announced they are migrating to LTE for it's 4G technology. The information below is no longer accurate and should not be used. It is being retained just for historical purposes...

 

 

 

BTA's Not Meeting FCC Minimum Service Mandates (where more Protection Sites are anticipated...)

by Sprint 4G Rollout Updates on Friday, August 19, 2011 at 9:39 pm

 

 

 

I've created this thread as a way to track upcoming Protection Sites. I will keep this thread updated, removing BTA's (Basic Trading Areas) once they meet FCC Minimum Service Requirements, or change categories. See BTA listings below...

 

High Likelihood of Protection Site

These BTA's do not have any 2.5GHz service from Clearwire and thus do not meet FCC Minimum Service Requirements. These are highly likely to get at least one tower of service between now and the FCC Extended Deadline of November 1, 2011.

  • Arkansas > Harrison (BTA #182)
  • California > El Centro/Imperial (BTA #124)
  • California > San Luis Obispo (BTA #405)
  • Idaho > Idaho Falls/Rexburg/Salmon and Jackson WY (BTA #202)
  • Idaho > Pocatello/American Falls/Soda Springs (BTA #353)
  • Idaho > Twin Falls/Burley/Sun Valley (BTA #451)
  • Iowa > Burlington/Ft. Madison/Keokuk (BTA #61)
  • Iowa > Cedar Rapids (BTA #70)
  • Iowa > Dubuque (BTA #118)
  • Iowa > Fort Dodge/Storm Lake (BTA #150)
  • Iowa > Iowa City (BTA #205)
  • Iowa > Mason City (BTA #285)
  • Iowa > Ottumwa/Oskaloosa (BTA #337)
  • Iowa > Sioux City (BTA #421)
  • Kentucky > Corbin/London (BTA #98)
  • Kentucky > Pikeville (BTA #474)
  • Kentucky > Somerset (BTA #423)
  • Michigan > Alpena (BTA #11)
  • Michigan > Battle Creek (BTA #33)
  • Michigan > Escanaba/Manistique (BTA #132)
  • Michigan > Mt. Pleasant (BTA #307)
  • Michigan > Midland/Saginaw/Bay City (BTA #390)
  • Michigan > Petoskey/Cheboygan (BTA #345)
  • Michigan > Traverse City (BTA #446)
  • Minnesota > Brainerd (BTA #54)
  • Minnesota > Willmar/Montevideo (BTA #477)
  • Missouri > Poplar Bluff (BTA #355)
  • Missouri > West Plains (BTA #470)
  • Montana > Bozeman/Belgrade (BTA #53)
  • Montana > Butte (BTA #64)
  • Montana > Missoula (BTA #300)
  • Nebraska > Hastings (BTA #185)
  • Nebraska > McCook (BTA #270)
  • New Hampshire > Keene & Brattleboro VT (BTA #227)
  • New Mexico > Clovis/Portales (BTA #87)
  • New Mexico > Gallup and St. John's/Eagar, AZ (BTA #162)
  • New Mexico > Hobbs/Lovington (BTA #191)
  • New Mexico > Roswell/Ruidoso (BTA #386)
  • New York > Glens Falls/Lake George (BTA #164)
  • New York > Jamestown/Dunkirk and Warren PA (BTA #215)
  • New York > Oneonta/Delhi (BTA #333)
  • New York > Plattsburgh (BTA #352)
  • North Dakota > Dickinson (BTA #113)
  • North Dakota > Grand Forks/Devils Lake and Thief River Falls MN (BTA #166)
  • North Dakota > Minot (BTA #299)
  • North Dakota > Williston (BTA #476)
  • Ohio > Chillicothe (BTA #80)
  • Ohio > Lima (BTA #255)
  • Ohio > Zanesville (BTA # 487)
  • Pennsylvania > Allentown/Bethlehem/Easton (BTA #10)
  • Pennsylvania > Johnstown/Somerset (BTA #218)
  • Pennsylvania > Meadville (BTA #287)
  • Pennsylvania > Stroudsburg (BTA #435)
  • South Carolina > Anderson/Toccoa GA (BTA #16)
  • South Carolina > Greenwood (BTA #178)
  • South Dakota > Aberdeen/Mobridge (BTA #1)
  • South Dakota > Watertown (BTA #464)
  • Tennessee > Cookeville (BTA #96)
  • Texas > Del Rio/Eagle Pass (BTA #121)
  • Texas > San Angelo/Brady/Ozona (BTA #400)
  • Utah > Logan/Preston ID (BTA #258)
  • Utah > St. George/Cedar City (BTA #392)
  • Vermont > Rutland/Bennington (BTA #388)
  • Virginia > Charlottesville (BTA #75)
  • Virginia > Staunton (BTA #430)
  • Virgin Islands > All Areas (BTA #491)
  • Washington > Longview/Kelso (BTA #261)
  • West Virginia > Beckley/Lewisburg (BTA #35)
  • West Virginia > Clarksburg/Elkins (BTA #82)
  • West Virginia > Fairmont (BTA #137)
  • West Virginia > Logan (BTA #259)
  • West Virginia > Morgantown (BTA #306)
  • West Virginia > Princeton/Bluefield, VA/WV (BTA #48)
  • West Virginia > Weirton/Steubenville OH (BTA #430)
  • West Virginia > Wheeling/St. Clairsville OH (BTA #471)
  • Wisconsin > Wisconsin Rapids/Stevens Point (BTA #432)

 

Moderate Likelihood of Additional Protection Site(s)

These BTA's have some 2.5GHz service deployed, but definitely not enough to meet the FCC Minimum Service Requirement of 30% of BTA Population covered with useable signal.

  • California > San Diego County (BTA #482)
  • Puerto Rico > Mayaguez/Ponce (BTA #489)

 

Slight Chance of Additional Protection Site(s)

These BTA's have a decent amount of 2.5GHz service deployed, but appear slightly below meeting the FCC Minimum Service Requirement of 30% of BTA Population covered with useable signal.

  • Alaska > Juneau (BTA #221)
  • American Samoa > All Areas (BTA #492) - I have this one as slight because they may allow this license to lapse.
  • California > Fresno (BTA #157)
  • California > Santa Barbara/Santa Maria (BTA #406)
  • Guam > All Areas (BTA #490) - I have this one as slight because they may allow this license to lapse.
  • Hawaii > Kauai/Lihue (BTA #254)
  • Northern Mariana Islands > All Areas (BTA #493) - I have this one as slight because they may allow this license to lapse.
  • Oregon > Coos Bay/North Bend (BTA #97)

 

Not Likely any Additional Protection Site(s)

These BTA's appear to meet the FCC Minimum Service Requirement of 30% of BTA Population covered with useable signal.

  • Alaska > Anchorage (BTA #14)
  • Alaska > Fairbanks (BTA #136)
  • California > Bakersfield (BTA #28)
  • California > Chico/Paradise (BTA #79)
  • California > Eureka/Crescent City (BTA #134)
  • California > Los Angeles (BTA #262)
  • California > Merced (BTA #291)
  • California > Modesto (BTA #303)
  • California > Redding/Red Bluff (BTA #371)
  • California > Sacramento/Northern Sierras (BTA #389)
  • California > San Francisco/San Jose/Oakland (BTA #404)
  • California > Stockton (BTA #434)
  • California > Visalia (BTA #458)
  • California > Yuba City/Marysville (BTA #485)
  • Hawaii > Hawaii/Hilo & Kailua (BTA #190)
  • Hawaii > Maui/Molokai/Lanai (BTA #222)
  • Hawaii > Oahu/Honolulu (BTA #192)
  • Idaho > Boise (BTA #50)
  • Idaho > Lewiston/Moscow and Clarkston WA (BTA #250)
  • Nevada > Reno/Carson City/Elko and Mammoth Lakes CA (BTA #372)
  • Oregon > Bend/Redmond/Prineville (BTA #38)
  • Oregon > Eugene (BTA #133)
  • Oregon > Klamath Falls/Alturas CA (BTA #231)
  • Oregon > Medford/Grants Pass (BTA #288)
  • Oregon > Portland (BTA #358)
  • Oregon > Roseburg (BTA #385)
  • Oregon > Salem/Corvallis (BTA #395)
  • Puerto Rico > San Juan (BTA #488)
  • Washington > Aberdeen/Hoquiam (BTA #2)
  • Washington > Bellingham (BTA #36)
  • Washington > Bremerton (BTA #55)
  • Washington > Olympia (BTA #331)
  • Washington > Port Angeles (BTA #356)
  • Washington > Seattle/Tacoma (BTA #413)
  • Washington > Spokane/Pullman and Coeur d' Alene ID (BTA #425)
  • Washington > Walla Walla/Pendleton OR (BTA #460)
  • Washington > Wenatchee (BTA #468)
  • Washington > Yakima (BTA #482)

 

 

 

BTAmap081911.jpg

The Sprint 4G/Clearwire FCC BTA Map as of August 19, 2011.

 

A full resolution image of this map can be found at: http://4g.herronweb....TAmap081911.jpg

Link to comment
Share on other sites

Migrated from Original Forum. Originally Posted 8 January 2011

 

In the past few months I've read a lot about beam forming. I wish they had used that in their deployment of 2.5GHz. WiMax would have never had the bad wrap and seen as inferior to LTE. Oh, what should have been.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...