Jump to content

LG G2 Users Thread!


koiulpoi

Recommended Posts

And also from what i seen in the source code list i read through last night on lg's site its there for sprint to send unless im mistaken. So it seems its on them not lg.

Link to comment
Share on other sites

Thays my thing how can they put it out on the flex before the g2 that dont make any sense at all. I mean i know they havent had tri band phones forever but this is a little overboard when your gonna release another phone by the same manufacter with the update on it.

The Flex probably has a hardware fix for Triband. G2 is likely overcoming it's issues through software, which is a lot harder.

 

No matter what, zva source is posted so kernel is updated. Keep an eye on the RDF and see if the modem changes. Otherwise, they're tweaking values inside the system apks.

 

Sent from my LG-LS980

 

 

Link to comment
Share on other sites

Thays my thing how can they put it out on the flex before the g2 that dont make any sense at all. I mean i know they havent had tri band phones forever but this is a little overboard when your gonna release another phone by the same manufacter with the update on it.

Why doesn't it make sense? The G2 and the G Flex are two completely different devices. The "update" on the Flex is likely not the same code that the G2 requires. Not to mention that Sprint hinted the G2 update would be out by the end of the month, and we still have a week to go. And do we have any proof that the Flex will be Spark-enabled at launch? It's not entirely clear in the press release, and I have yet to see a hands-on review confirming it.

 

You are basically complaining that the Flex should not be released until the G2 and Nexus 5 both have the Spark update. To use your line, "That dont make any sense at all."

 

-Mike

  • Like 3
Link to comment
Share on other sites

Well when sprint had the news release it was said that it would be tri band out the box along with the prepaid dongle for virgin mobile. Thats what it said. And all i was saying was that the flex is pretty much the same hardware as far as chipset. And that its not like they didnt have some kind of knowledge that there was going to be tri band phones thats why it was so late coming out, well nobody knew at the time why but now we do and then they really was vague about the phone at first about what was going on with the phone and its issues. I just dont see why its so hard for them to get this phone updated when thetes devices out after ours that have no problems. Im not just bashing them or anything i like my phone but i dont think they should say they are going to release a update this month if they wasnt positive it could be done is all. And thats not to say it wont happen either id like to think they will have it ready by the end of the month.

Link to comment
Share on other sites

You realize that the Nexus 5 doesn't have its Spark update either, right?

 

-Mike

And they're all lg phones that are slow on updates

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

And they're all lg phones that are slow on updates

 

Sent from my LG-LS980 using Tapatalk

Which isn't at all true either. The Nexus has been getting maintenance updates just like the g2 did on a pretty rapid basis in my eyes.

Software really isn't that big of a deal guys. If it was as easy as what you guys are making it seem like it would be out.

Find something else to occupy your time with other than staring at your phone waiting on an update.

  • Like 1
Link to comment
Share on other sites

Well i thought about that too when i got it but lg was saying they were gonna step there game up so i went on and got it. And just to show they have somewhat they arent putting 4.3 on there older devices they are skipping straight to kit kat with their updates so they are trying to go in the right direction.

Link to comment
Share on other sites

Id like to root my phone but ive been trying to wait for the spark update before i do. I had my gs3 rooted and i liked it cause you get updates faster and just a lot more customizable.

Link to comment
Share on other sites

I'd stay off CM11 for now until they fix the bug that causes the device to unregister from Sprint's network.  Unfortunately, it's carried over to my backup so I'm having to wipe the device completely and go stock.

 

Oh damn.... sorry to hear that man! 

 

 

Id like to root my phone but ive been trying to wait for the spark update before i do. I had my gs3 rooted and i liked it cause you get updates faster and just a lot more customizable.

 

 

Ah, ok, I think.   :scratch:

 

Where you asking a question or just thinking out loud? 

Link to comment
Share on other sites

Well i thought about that too when i got it but lg was saying they were gonna step there game up so i went on and got it. And just to show they have somewhat they arent putting 4.3 on there older devices they are skipping straight to kit kat with their updates so they are trying to go in the right direction.

I think they stepped their game up for sure. They fixed the earpiece issue relatively quickly with the maintenance release.

You guys do realize even with spark enabled your phone will still more than likely hold onto1900 due to it reaching a wider area than 2600 right? I don't see why the big push for it all the sudden.

Link to comment
Share on other sites

Which isn't at all true either. The Nexus has been getting maintenance updates just like the g2 did on a pretty rapid basis in my eyes.

Software really isn't that big of a deal guys. If it was as easy as what you guys are making it seem like it would be out.

Find something else to occupy your time with other than staring at your phone waiting on an update.

I don't get it. Software is almost the only deal these days since the hardware is almost irrelevant today with the. CPUs be in fat enough and all. I emailed LG to tell them they need to support their devices and customers if they want customers to support them and they simply replied that there were no plans at the present time to upgrade the G2 to kitkat. Go figure! I hope they go out of business. I'm very happy at both HTC and samsung at updating their old phones. I can't wait for HTC to finally come out with a hardware refresh so I can consider their phones again. Their current phone was a non-starter for me.

Link to comment
Share on other sites

I don't get it. Software is almost the only deal these days since the hardware is almost irrelevant today with the. CPUs be in fat enough and all. I emailed LG to tell them they need to support their devices and customers if they want customers to support them and they simply replied that there were no plans at the present time to upgrade the G2 to kitkat. Go figure! I hope they go out of business. I'm very happy at both HTC and samsung at updating their old phones. I can't wait for HTC to finally come out with a hardware refresh so I can consider their phones again. Their current phone was a non-starter for me.

If you don't like LG's software business model don't buy from them? Pretty simple to me. Hence why I don't buy apple. I don't like the idea of them polishing a turd and reselling it as a brand new item. In this day and age it's pretty easy to switch phones if you're unhappy. The 14 day trial period is your friend.
Link to comment
Share on other sites

I hate to keep beating a dead horse, but do you guys have any tips or suggestions for connecting to 41? I got my msl and set 41,25,26 to 1, 0, 0, respectively and couldn't connect all night. Without the update, is it random when you'll connect? Or is there some trick that I'm missing. Thanks.

 

Vince

 

 

Link to comment
Share on other sites

I hate to keep beating a dead horse, but do you guys have any tips or suggestions for connecting to 41? I got my msl and set 41,25,26 to 1, 0, 0, respectively and couldn't connect all night. Without the update, is it random when you'll connect? Or is there some trick that I'm missing. Thanks.

 

Vince

Do you know that you are in a Band 41 Market?

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Anyone have a stock backup handy on their G2?  It'd be appreciated because right now my device is useless.  My EFS settings were wiped on CM11 and now my radio settings don't work.  If I can restore someone else's EFS settings, my radio will work again.

Link to comment
Share on other sites

I'm in Chicago. Plenty of spark here.

 

Vince

Anyone have a stock backup handy on their G2? It'd be appreciated because right now my device is useless. My EFS settings were wiped on CM11 and now my radio settings don't work. If I can restore someone else's EFS settings, my radio will work again.

There is a factory image on xda for v7 I used 4 or 5 times. Also rocking Houston's paranoid android..no issues

 

Sent from my LG-LS980 using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

Another to add to the list of reasons why I dont use AOSP, even though I want to. Ill upload to box or dropbox soon, itll be from philz custom

Hey, actually I'm going to send it in for repair.  There's no way I can restore it.  Device is rebooting as soon as it boots so I can't re-root to restore your EFS backup.

 

Thanks for the help, though!

Link to comment
Share on other sites

Hey, actually I'm going to send it in for repair. There's no way I can restore it. Device is rebooting as soon as it boots so I can't re-root to restore your EFS backup.

 

Thanks for the help, though!

The image is over a 1gb and you have to use the PC based lg utility to flash

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Hey, actually I'm going to send it in for repair. There's no way I can restore it. Device is rebooting as soon as it boots so I can't re-root to restore your EFS backup.

 

Thanks for the help, though!

Here is the link with guide

 

 

http://www.thefullsignal.com/lg/lg-g2/16127/how-unroot-your-lg-g2

 

Sent from my LG-LS980 using Tapatalk

 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...