Jump to content

RRU Who? [solved]


Recommended Posts

So in my daily passings of this site from work I saw some hoist ropes and guys up on the platform.  There's two short towers on top of the building and last month they were working on the south one, Sprint is on the North one on the building.  Had to be Sprint this time right?  So I double back and this is what I found.  Some weird looking triple band antennas with odd RRUs.  I rolled by the site and saw someone out by the gate so I stopped and asked him.  He said he thinks it was Verizon but he really doesn't know as they do all companies.  Has anyone seen these before?  It kind of looks like the have a fourth one laying down on the platform tied to another antenna.

 

RRUWHO.JPG

Link to comment
Share on other sites

T-mobile Nokia Siemens Networks Flexi RRUs & Antennas. 

 

Hmm... I've seen those before on another site around here that had what looked like 3 of them stacked together and they had a grey front. 

 

They looked like this except they had 3 of them and I found they were the NSN Flexi RRUs..these look different.

 

http://www.nokiasiemensnetworks.com/sites/default/files/gallery_images/Flexi_Wall_product_80__copy_2.jpg

Link to comment
Share on other sites

Hmm... I've seen those before on another site around here that had what looked like 3 of them stacked together and they had a grey front. 

 

They looked like this except they had 3 of them and I found they were the NSN Flexi RRUs..these look different.

 

http://www.nokiasiemensnetworks.com/sites/default/files/gallery_images/Flexi_Wall_product_80__copy_2.jpg

 

 

 

There are different RRU setup configurations that NSN can use (stacked or pole mounted) but those are definitely NSN Flexis and Antennas. The blue sticker with the NSN symbol gives it away. 

Link to comment
Share on other sites

Can you get your camera and zoom in on the connections?

 

 

 

That is my plan when I had better sunlight and more time ;)  I had to shoot this pic from across the interstate to get the right vantage point and have the little bit of sun to my back.

Link to comment
Share on other sites

 

 

 

 

There are different RRU setup configurations that NSN can use (stacked or pole mounted) but those are definitely NSN Flexis and Antennas. The blue sticker with the NSN symbol gives it away. 

 

 

Where's the blue sticker?   on the antenna?  does NSN make the antenna too?

 

And interesting they are going with a 4 sectors and these tri-band antennas! 

Link to comment
Share on other sites

Where's the blue sticker?   on the antenna?  does NSN make the antenna too?

 

And interesting they are going with a 4 sectors and these tri-band antennas! 

 

Yes. NSN makes their own antennas and Flexis. There is no way to mistake NSN gear as no one else in America uses them that is until Sprint starts deploying Flexis for TD-LTE (they were re-certified for usage for TD-LTE on 2500-2600mhz). 

  • Like 1
Link to comment
Share on other sites

You can see the user guide here... Your above image is indeed of NSN flexis in an stacked enclosure. The NSN Flexis above are in a pole mounted configuration. 

 

As  seen here.. https://apps.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=836565&fcc_id=VBNFZHE-01

Link to comment
Share on other sites

Yes. NSN makes their own antennas and Flexis. There is no way to mistake NSN gear as no one else in America uses them that is until Sprint starts deploying Flexis for TD-LTE (they were re-certified for usage for TD-LTE on 2500-2600mhz). 

 

Then TMobile it is... thanks for the confirmation.  I'll have to do a spectrum analysis and see if they are fired up in a few days.  I found it weird they were using tri-band antennas but maybe they are doing something like Sprint did since they have PCS and AWS licenses here.  And I'm 100% sure this isn't Sprint 2.6 as that's going to be a while in this area.

 

Sprint is still legacy on this site

Link to comment
Share on other sites

Yeah, digiblur's pics look similar to the T-Mobile antenna pics that I have taken in my market.

 

2vkdu36.jpg

 

24pgrb4.jpg

 

But the size and shape of the short, flat antenna in digiblur's pics are decidedly different.

 

AJ

Link to comment
Share on other sites

So in my daily passings of this site from work I saw some hoist ropes and guys up on the platform. There's two short towers on top of the building and last month they were working on the south one, Sprint is on the North one on the building. Had to be Sprint this time right? So I double back and this is what I found. Some weird looking triple band antennas with odd RRUs. I rolled by the site and saw someone out by the gate so I stopped and asked him. He said he thinks it was Verizon but he really doesn't know as they do all companies. Has anyone seen these before? It kind of looks like the have a fourth one laying down on the platform tied to another antenna.

 

Posted Image

I have a att tower behind my work that was updated with those small flat panels at the top rack. The lower rack was fitted with lte awhile back. They guys told me the top rack was for the1900 refarm which take with a grain of salt but they did replace very old yellowish panels that looked about 10 yrs old.

 

Sent from my SPH-L720 using Tapatalk 2

 

 

Link to comment
Share on other sites

Much to my dismay I found to he exact same RRUs on the ground at the site that covers my house - I saw the crew up on the rack on my drive home so I circled back an hour later and although the crew was gone most of the equipment was still on the ground. I was optimistic that it would be NV gear, but the tower is shared with TMobile, there were Nokia Siemens logos and boxes all over, and the antenna IDs were similar to Sprint but did not match the Sprint site ID info. No Samsung gear anywhere to be found....I guess it just wasn't meant to be yet.

Link to comment
Share on other sites

I've seen new NSN antennas on towers in Jacksonville. Damn T-Mobile for getting our hopes up! I am pretty sure that the antennas are larger than what Sprint uses, too.

Link to comment
Share on other sites

I found it weird they were using tri-band antennas but maybe .....

 

Maybe they're optimistic about the upcoming 600mhz auction? :lol:

Link to comment
Share on other sites

Maybe they're optimistic about the upcoming 600mhz auction? :lol:

 

Dunno... I believe they have 15x15 of PCS and 5x5 of AWS here.  I'll have to keep an eye out on their other sites, they only have a handful here and actually have less than Sprint.  I can pick up Sprint with a somewhat weak signal in my backyard(in city limits) but Tmobile is fat zero.

Link to comment
Share on other sites

Yes. NSN makes their own antennas and Flexis. There is no way to mistake NSN gear as no one else in America uses them that is until Sprint starts deploying Flexis for TD-LTE (they were re-certified for usage for TD-LTE on 2500-2600mhz). 

In that case in NYC which is T-Mobile's Ericsson market they use NSN antenna as well? RRU is totally Ericsson RRU11.

3xq7yUFl.jpg

Link to comment
Share on other sites

Yes. NSN makes their own antennas and Flexis. There is no way to mistake NSN gear as no one else in America uses them that is until Sprint starts deploying Flexis for TD-LTE (they were re-certified for usage for TD-LTE on 2500-2600mhz). 

 

Well, turns out they aren't specifically NSN Antennas.  Thanks Milan03 for poking me over on another message board, but I've discovered a site that looks like OP's picture here in CSprings.  

 

Most of the sites here look like FillmoreRefarmfullsize_zps0f33f887.jpg

 

but there's one near the house that looks like OP's picture:

tmobiletower1_zpsb346b18d.png

 

 

So, the legacy panel is still mounted because as you can see, this site isn't completely up and running.  They threw this together at the last second just as LTE launched here Aug 1.  

 

So, a few things about T-Mobile panels, lilotimz.  Turns out, all the panels in the first picture and the middle panel in the second picture are made by a company called Andrew, which, to the best of my knowledge, isn't affiliated with NSN.  I found this out after waiting months for T-Mobile to equipment refresh a site in-county but outside of city limits (none of CSprings records of this type are online).  

 

http://adm.elpasoco.com/Development%20Services/Documents/Planning%20Commission/2013/Staff%20Reports/07%20July/CMRE%20VA-13-004%20Variance%20of%20Use.pdf

 

Page 23 has the make and model #'s of the panels they're using here in town.  I'm still unsure who makes the fat panel you see in the second picture, but it has the same purple triangle marking as all of the other NSN T-Mobile sites here.  I'm going to assume it is also an Andrew panel as the connectors and servo motors hanging from the bottom look the same.  As for milan03's panel amidst the sea of Ericsson, it looks an awful lot like the Andrew panels they use here, minus the bottom-connectors.  While the stickers on the panel are different colours, they appear to be in very similar positions on the similarly-shaped panel, so it could be a different Andrew model.  

Edited by ac21365
Link to comment
Share on other sites

So, I revisited the site I posted about earlier.  Apologies for the scatterbrainedness of the previous post, so here's a recap:

 

- Both panels on this site are new

- Turns out it was just unfinished in my earlier picture (see the Flexi Base Stations mounted now)

- The 'fat' panel appears to be an Andrew panel by the similar markings as the other panel (the other panel being widely used around town on all other NSN sites).

 

IMG_0003_zps23ae9c7b.jpg

IMG_0005_zps6b73ae2c.jpg

 

IMG_0009_zps818a8005.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...