Jump to content

SoftBank, Huawei LTE-A test reaches 770 Mbps in 3.5 GHz band Read more: SoftBank, Huawei LTE-A test reaches 770 Mbps in 3.5 GHz band


IamMrFamous07

Recommended Posts

Japanese telecom operator SoftBank collaborated with network gear vendor Huawei on a field test of LTE Advanced in the 3.5 GHz band that supported a peak download speed of 770 Mbps and average download speeds of 500 Mbps.

The test involved multiple LTE-A technologies to achieve those speeds, including carrier aggregation (CA), coordinated multi-point (CoMP) and cloud baseband, said the companies.

The demo late last month was held in Tokyo's densely populated Ginza district and hosted by the Global TD-LTE Initiative (GTI). Members are interested in speeding up the release of 3.5 GHz spectrum for TD-LTE use. SoftBank and Huawei said Japan's government is expected to allocate spectrum from 3.4 to 3.6 GHz for commercial LTE networks by 2015.


Read more: SoftBank, Huawei LTE-A test reaches 770 Mbps in 3.5 GHz band - FierceBroadbandWireless http://www.fiercebroadbandwireless.com/story/softbank-huawei-lte-test-reaches-770-mbps-35-ghz-band/2013-09-15#ixzz2ewEnLseD 
Subscribe at FierceBroadbandWireless

 

  • Like 1
Link to comment
Share on other sites

That high frequency wouldn't penetrate a piece of paper B)

3.5GHz works just fine in the density that it is deployed in Asia. It will penetrate walls in the short distances that of is designed for. 2.6GHz even penetrates fine when you are inline with a sector and within half mile of a site. High frequencies are fine, used in conjunction with lower frequencies to fill in the gaps.

 

Robert via Samsung Galaxy Note 8.0 using Tapatalk

 

 

  • Like 2
Link to comment
Share on other sites

Ericsson has already demoed TD-LTE in 2600 that can do this; it's not a Huawei-specific thing. But my guess is that Huawei was more willing to show off their next-gen tech to SoftBank than Ericsson was.

 

In other news, Huawei is responsible for at least on Canadian Band 7 (20x20 FD) operator's (I think Bell) deployments.

 

Also, when you amp up the power, it's surprising what you can do with higher frequencies. 3.5GHz would be excellent for airport or stadium DASes. And fixed wireless everywhere else.

Link to comment
Share on other sites

Lots of neat things coming in the next few years to off load in key areas. Similar to the large stadiums and big tourist areas that only span a block or two area but have high usage.  Even some areas in bigger Cities that have lots of high rise condo and apartment bldgs in a smaller area can benefit from things like this.  Tech is going fast and we can hardly grab on !  Fun times  :o

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...