Jump to content

Boosting LTE over 1900


Recommended Posts

I am curious as to whether putting a booster on my barely served (~110db - ~90db with a lot of ec/lo by windows) will also boost LTE signals once they get turned on. I plan on putting up a directional antenna to hopefully mitigate the echo. 

 

I plan on getting a wilson booster, I am not sure if it boosts everything or if it picks and chooses what to boost.

Link to comment
Share on other sites

There are no commercially available boosters that support the Sprint PCS G Block except the Wilson Sleek 4G device.  That is a cradle type device designed for cars or offices.

 

All other PCS boosters only support the traditional PCS A-F blocks.

 

The FCC changed the rules on boosters this past spring, requiring carrier approval and user registration with the carrier for a booster.

 

It will be awhile before you'll see a booster for SMR spectrum as the FCC must await to have all the public safety traffic moved around before approving any devices in that spectrum.

Link to comment
Share on other sites

Oddly enough, my Wi-Ex YX500-PCS is repeating the G block without issue.  Away from it I have no LTE.  Within 10 feet, I'm at -91 to -97.  Within 5 feet of the device, I am at -87 or better.  Perhaps I'm just lucky that it works.  Unfortunately, there are two walls between the repeater and my office, so I only rarely get a -102 to -118 if it on my desk.  It cuts out more frequently than I'd like, but with no Wi-Fi, it is helpful to have.

Link to comment
Share on other sites

Oddly enough, my Wi-Ex YX500-PCS is repeating the G block without issue.  Away from it I have no LTE.  Within 10 feet, I'm at -91 to -97.  Within 5 feet of the device, I am at -87 or better.  Perhaps I'm just lucky that it works.  Unfortunately, there are two walls between the repeater and my office, so I only rarely get a -102 to -118 if it on my desk.  It cuts out more frequently than I'd like, but with no Wi-Fi, it is helpful to have.

 

I was thinking of getting this one.

 

http://www.wilsonamplifiers.com/ag-pro-75-amplifier-only-75db-dual-band-50ohm-801280/

Link to comment
Share on other sites

I am curious as to whether putting a booster on my barely served (~110db - ~90db with a lot of ec/lo by windows) will also boost LTE signals once they get turned on. I plan on putting up a directional antenna to hopefully mitigate the echo. 

 

I plan on getting a wilson booster, I am not sure if it boosts everything or if it picks and chooses what to boost.

 

Couple questions.

 

Is this for your house?

 

If so, do you have WiFi? Why do you need LTE in your house?

 

If you have voice signal issues, the best solution would be an Airave until 800MHz 1x is live.

Link to comment
Share on other sites

Couple questions.

 

Is this for your house?

 

If so, do you have WiFi? Why do you need LTE in your house?

 

If you have voice signal issues, the best solution would be an Airave until 800MHz 1x is live.

 

It is for my girlfriend's house she lives in an area not served by cable, DSL or FIOS. Even land-line telephone is iffy. Satellite will not work with an airave

Link to comment
Share on other sites

Ok, just wanted to make sure everything else had been considered.

Also it is not for internet use. It is really in case of an emergency there is another way to get help. The house phone is not always reliable. Even power is not reliable and we are going to be getting solar soon.

Link to comment
Share on other sites

You need LTE in your house when your grampa is streaming Netflix

and you want to stream youtube but you cant because you have a crap connection like this

 

2926066487.png

 

You don't know how lucky you are to have that good of a connection.

 

You can control internet traffic per device on your router if you want to, if you have the correct router.

Link to comment
Share on other sites

You don't know how lucky you are to have that good of a connection.

 

You can control internet traffic per device on your router if you want to, if you have the correct router.

LUCKY? dude I ping outside Hawaii I expect pings up to 250+ not good for gaming,

Link to comment
Share on other sites

LUCKY? dude I ping outside Hawaii I expect pings up to 250+ not good for gaming,

Not to get hopes up, but if cable pings that high for you,than it will bethe same or higher on LTE. Just how it works if you live in the middle of the pacific

Link to comment
Share on other sites

Not to get hopes up, but if cable pings that high for you,than it will bethe same or higher on LTE. Just how it works if you live in the middle of the pacific

LTE is lower ping don't know what fiber Verizon is using..

Link to comment
Share on other sites

LTE is lower ping don't know what fiber Verizon is using..

But that is to a select server, given where gaming servers are in comparison to hawaii, and equipment, it is going to be higher. Cell networks aren't ideal for online gaming. 

Link to comment
Share on other sites

Not to get hopes up, but if cable pings that high for you,than it will bethe same or higher on LTE. Just how it works if you live in the middle of the pacific

While living in Japan, I would sometimes ping sub-50ms to USA servers for various games. I was rarely the highest ping, and that was living on the other side of the world.

 

Now, of course, we're talking about Japan versus "Hawaiian Telecom"...

  • Like 1
Link to comment
Share on other sites

Now, of course, we're talking about Japan versus "Hawaiian Telecom"...

 

If HawaiiD is correct, it is actually "Coconut Telecom."  Put the lime in the coconut and drink 'em both up.

 

AJ

Link to comment
Share on other sites

But that is to a select server, given where gaming servers are in comparison to hawaii, and equipment, it is going to be higher. Cell networks aren't ideal for online gaming. 

Not really, I find that ping is around 30MS lower than your standard cable/sat/dsl in hawaii

Link to comment
Share on other sites

If HawaiiD is correct, it is actually "Coconut Telecom."  Put the lime in the coconut and drink 'em both up.

 

AJ

of course haha. but I just dont see lte having lower ping times if the cable companies cant provide low pings. Heck I get 40-50 ping and im in the us pinging to dallas less than 200 miles away. Sometimes more. It all depends on quality of the lines and such. I was in alaska and never saw below a 150ms ping. And thats in Anchorage.
Link to comment
Share on other sites

Not really, I find that ping is around 30MS lower than your standard cable/sat/dsl in hawaii

well some test will be lower, but most of the time cell networks and such raise ping times. There of course is always exceptions. Ive had some test in the states that I get 36 ms ping, which if on any cable Ive had is nnotthe best. Given my homes cable is usually 40ms ping. But the backhaul provider for Tyler, is suddenlink, and they provide less than 10ms ping on cable
Link to comment
Share on other sites

wow I wish my job would install these for a vans!!!! id be happy with verizons 1x or 3g. Just so I can use my phone with out driving a mile to find one bar

Come to this state... We have bars all over the place. Even ones with drive through windows.

  • Like 5
Link to comment
Share on other sites

You need LTE in your house when your grampa is streaming Netflix

and you want to stream youtube but you cant because you have a crap connection like this

 

2926066487.png

And I complain about my 20+ download sometimes. Wow... Edited by rgroves
Link to comment
Share on other sites

You need LTE in your house when your grampa is streaming Netflix

and you want to stream youtube but you cant because you have a crap connection like this

 

2926066487.png

You ever consider changing the password on him xD

Link to comment
Share on other sites

I want a booster at my gf's house because she has a hotspot (nothing else is available) and we are happy to pay for the appropiate tier... if its usable... Its not unlimited and it is stationary. That is the reason they make hotspots... to abuse them on LTE. :P

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...