Jump to content

Current Sprint PRLs


halcyoncmdr

Recommended Posts

After reading some threads here in regards to PRL versions and the differences between each version on different devices, I took the time to find the listing of all current Sprint PRLs.
 
This includes the official changes made with each new PRL revision as well.
 

 

https://docs.google.com/spreadsheets/d/1eNgQKxdPHgua60suUeQ4E7KvtUAFPDVkpqTL2sBorNg/pubhtml
 
While the information this comes from is on an internal Sprint page, the information itself is not proprietary as it can all be obtained through an analysis of the PRLs loaded on every Sprint device in the wild, something members of this community have already been doing.
 
My hope is that by making this information easier to find, it will lead to more discussion and overall a better community.
 


  • Like 23
Link to comment
Share on other sites

6/28/2013 Update: 

 

As of this update in the stock PRLs (except for the 2xxx temp Note2 PRL) all of the 800SMR SIDs are included in the scans except for the following areas:

 

22429,Sprint Nextel,Boise ID; Brigham City UT; Jackson Hole WY; Salt Lake City UT; St. George UT
22433,Sprint Nextel,Pendleton OR; Sandpoint ID; Spokane WA
22449,Sprint Nextel,Charlotte Amalie VI; Ponce PR; San Juan PR
22450,Sprint Nextel,Charlotte WV; Lynchburg VA; Roanoke VA

 

Info on the 2xxx NoteII PRL:

 

Preferred Roaming List Release: Samsung Note II

On 6/13/13, Sprint released a new Preferred Roaming List (PRL) series 2xxx, for Samsung Note II (SPH-L900) devices only.

  • The PRLs are designed to remove access to Sprint's 800 MHz network based on reported issues of the inability to make/receive voice calls and text messages while using this network.
  • The new PRL's have been sent out to all the Samsung Note II devices.
  • This is a temporary solution until a root cause and fix is found for this device.
  • The PRL will continue to allow access to Sprint's 1900 CDMA and roaming partner networks.
  • Customers experiencing problems should be directed to update the PRL via device settings.
  • Like 1
Link to comment
Share on other sites

Thanks for doing this as this has been one of the things on my list. The one stop shop for PRL info instead of new threads anytime there is an update. This will be a sticky.

 

I had a feeling it was something you had planned, but I had access to all of them at once, officially. Much faster than figuring it out on your own with every phone, and much easier than trying to figure out each corporate PRL.

Link to comment
Share on other sites

So, still no word on why the note 2's on PRL 2000? I've noticed some 4g auth issues with 65009, but it work fine on 2000, so I wonder if 800 ESMR and 4G 1900 aren't playing nice.

 

Also, heh. 16015 is MBB, yet our Store's GS3 is on it.

Link to comment
Share on other sites

So, still no word on why the note 2's on PRL 2000? I've noticed some 4g auth issues with 65009, but it work fine on 2000, so I wonder if 800 ESMR and 4G 1900 aren't playing nice.

 

Also, heh. 16015 is MBB, yet our Store's GS3 is on it.

 

Weird.. Since I had no issues using it in Dallas. I bet we will see a baseband update soon though.

 

Not sure why you would see LTE Auth issues as all the prl has in it is basically an on/off switch for that Geo to scan for LTE or not.

Link to comment
Share on other sites

Weird.. Since I had no issues using it in Dallas. I bet we will see a baseband update soon though.

 

Not sure why you would see LTE Auth issues as all the prl has in it is basically an on/off switch for that Geo to scan for LTE or not.

 

I'm wondering if I was experiencing whatever issue that ran into. I made this post around June 6th. I have screenshots further down the thread.

 

http://s4gru.com/index.php?/topic/3916-before-after-cdma1x-800/page-2&do=findComment&comment=149947

Link to comment
Share on other sites

Weird.. Since I had no issues using it in Dallas. I bet we will see a baseband update soon though.

 

Not sure why you would see LTE Auth issues as all the prl has in it is basically an on/off switch for that Geo to scan for LTE or not.

I'm speculating, but I've noticed that the moment I switch from 2000 back to 65009, my 4G LTE refuses to connect.

Link to comment
Share on other sites

Thanks, cool spreadsheet!

 

I see the 51xxx series PRLs are intended for any device not utilizing simultaneous LTE and voice. Is the iPhone the only hardware on the network that falls in to this category?

Link to comment
Share on other sites

Thanks, cool spreadsheet!

 

I see the 51xxx series PRLs are intended for any device not utilizing simultaneous LTE and voice. Is the iPhone the only hardware on the network that falls in to this category?

 

As far as I know, yes.

Link to comment
Share on other sites

I'm going to be doing a road trip from stlouis to washdc in july, I have an htc one and note2, is there any particular recommended 'best' or custom prl for either/both devices that have working 3g roaming/800smr/lte ?

Link to comment
Share on other sites

I'm going to be doing a road trip from stlouis to washdc in july, I have an htc one and note2, is there any particular recommended 'best' or custom prl for either/both devices that have working 3g roaming/800smr/lte ?

The Note II has its own set of PRLs. The Corporate one with 3G roaming is 2001The HTC One is a svLTE AWM device, so it would be 540xx for the corporate 3G PRL.

 

The latest PRL series xxx15 and xxx97 have nationwide 800smr for all SIDs that will be used.

  • Like 1
Link to comment
Share on other sites

 

Preferred Roaming List Release: Samsung Note II

On 6/13/13, Sprint released a new Preferred Roaming List (PRL) series 2xxx, for Samsung Note II (SPH-L900) devices only.

  • The PRLs are designed to remove access to Sprint's 800 MHz network based on reported issues of the inability to make/receive voice calls and text messages while using this network.
  • The new PRL's have been sent out to all the Samsung Note II devices.
  • This is a temporary solution until a root cause and fix is found for this device.
  • The PRL will continue to allow access to Sprint's 1900 CDMA and roaming partner networks.
  • Customers experiencing problems should be directed to update the PRL via device settings.
    • If customer is still experiencing problems with this PRL series, open the appropriate network trouble ticket.

 

 

 

Link to comment
Share on other sites

I have the PRL 2000 and where i work, in a metal building of all :/, i get no signal on Sprint, none at all and it will not roam it will keep trying to get Sprint signal, killing my battery. I go into work usually with 80% left and after working for 5 to 6 hours ill have 20% left. Will a new, when they push it, PRL help? or just to do with them working on towers in my area. 

Link to comment
Share on other sites

I'm speculating, but I've noticed that the moment I switch from 2000 back to 65009, my 4G LTE refuses to connect.

Are you using stock TW or CM10.1?  There is a bug on CM10.1 with the RIL changes in the last month where you can install CM and LTE/eHRPD works until the first reboot, then it appears the network registration dies and you are stuck on shady EVDO/1X.

Link to comment
Share on other sites

 

 

Preferred Roaming List Release: Samsung Note II

On 6/13/13, Sprint released a new Preferred Roaming List (PRL) series 2xxx, for Samsung Note II (SPH-L900) devices only.

  • The PRLs are designed to remove access to Sprint's 800 MHz network based on reported issues of the inability to make/receive voice calls and text messages while using this network.
  • The new PRL's have been sent out to all the Samsung Note II devices.
  • This is a temporary solution until a root cause and fix is found for this device.
  • The PRL will continue to allow access to Sprint's 1900 CDMA and roaming partner networks.
  • Customers experiencing problems should be directed to update the PRL via device settings.
    • If customer is still experiencing problems with this PRL series, open the appropriate network trouble ticket.

 

 

 

 

Well, I guess since this has been straight up copied and pasted from the Sprint Daily News...

 

 

 

 

 

 

Are you using stock TW or CM10.1?  There is a bug on CM10.1 with the RIL changes in the last month where you can install CM and LTE/eHRPD works until the first reboot, then it appears the network registration dies and you are stuck on shady EVDO/1X.
 

That's got to be what it is. I've been on TW for a bit, but was switching back and forth for a while. I'll have to do some more testing to figure out exactly what's going on. Sadly, neither my home nor work are currently in 4G LTE areas, it's only when out and about that I'm constantly distracted by my phone and trying to make it work...

Link to comment
Share on other sites

What does the June 4th and April 12th dates mean on the spreadsheet?  How do I use the spreadsheet to know what I should be using?  I have an iPhone 5 and my PRL is 51097.

Link to comment
Share on other sites

What does the June 4th and April 12th dates mean on the spreadsheet? How do I use the spreadsheet to know what I should be using? I have an iPhone 5 and my PRL is 51097.

The dates represent the date each PRL was released.

 

Performing a PRL update will automatically send the most current PRL for your phone and account type. On the iPhone you perform updates by dialing ##UPDATE# and hitting the call button.

 

The info in this thread is exactly that, information.Sprint must pay for all roaming usage so it segregates corporate accounts with better roaming experience in some areas due to roaming agreements with whatever carrier is there. Consumer accounts may be limited to 1x roaming where corporate accounts may have EVDO roaming.

  • Like 1
Link to comment
Share on other sites

Anyone on the iPhone5 51097 update? Anyone know what the change from 96 is. I'm still on 51096 just wondering what changed before I update

Official change logs are on the second tab of the Google doc.

 

 

xxx97 - Updated to add Band Class 10 support nationwide for all planned markets. Roaming changes in eastern Colorado and western Kansas.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...