Jump to content

Kansas market NID/MSC change (was "MSC Boundary Change")


Recommended Posts

I am a big debug screen geek and I have noticed here lately that my NID has changed to a new number(308). Typically my home is in the NID 43 area and on my drive to work it changes to 42. In the last week both home and work now fall under the 308 NID. So my question is; does anyone know if something has changed in regards to Sprints MSC layout?

 

Thank You

Link to comment
Share on other sites

I am a big debug screen geek and I have noticed here lately that my NID has changed to a new number(308). Typically my home is in the NID 43 area and on my drive to work it changes to 42. In the last week both home and work now fall under the 308 NID. So my question is; does anyone know if something has changed in regards to Sprints MSC layout?

 

Thank You

 

How interesting that this is first noticed in Master AJ-WWAN's home market  ;)

  • Like 1
Link to comment
Share on other sites

I have not noticed any NID changes in my neck of the woods.  And our site info, as I recall, does not indicate any MSC assignment changes in the Kansas market.

 

Have you checked to see if NID 308 is on CDMA1X 800?

 

AJ

Link to comment
Share on other sites

Maybe NV is finally combining some of the former affiliate purchases with old corp networks into a single MSC.

 

That was done years ago in the Kansas market.  The Alamosa NIDs are long gone.

 

AJ

  • Like 1
Link to comment
Share on other sites

I still show CDMA PCS and the SID is still 4139. What is interesting is all of the BSID's that I am accustomed to seeing have all changed to a consistent 5 digit primarily starting with 52xxx.

What band class is listed on the debug screen?  Band 1 is 1900 and 10 is 800SMR

Link to comment
Share on other sites

The EVO LTE only shows Band# as "CDMA PCS" or "CDMA Cellular". I know its not 800SMR because the SID is still 4139 and it says CDMA PCS. I did some driving around and found that this 308 NID goes from at least Excelsior Springs to 119th and Renner in Olathe. That would typically be NID 42 in Olathe and NID 43 in Excelsior Springs.

Link to comment
Share on other sites

BSID and NID will change when the 1x portion of the tower your connecting to gets a network vision upgrade. Are you in an area they are upgrading?

 

Sent from my EVO LTE

 

 

Link to comment
Share on other sites

They all changed in Chicago when the 1x and EVDO work was done on a tower. I'm not sure if they are changing in other areas.

 

Sent from my EVO LTE

 

 

Link to comment
Share on other sites

Nothing has changed in Lawrence, still NID 43.  But I will be in Leawood and at UMKC today, so I will watch NIDs more closely than I have in several years.

 

Between Lawrence and KC, the NID 43/41 boundary is De Soto.  Then, in the city, the NID 41/42 boundary is around 75th St.  Other than the NID 43/41 transition along K-10 shifting one site west, those boundaries have remained static for many years, and I started tracking them over 10 years ago.

 

Also, FYI, NID 41 has been Lenexa-MSC_1.  NID 42 has been Lenexa-MSC_2.  And NID 43 has been Independence-MSC_1.  With potentially greater capacity new Ericsson MSCs and declining voice traffic, perhaps we will see a consolidation down to only one or two MSCs in the Kansas market.

 

AJ

  • Like 2
Link to comment
Share on other sites

AJ-

       Were you able to see anything different when you were downtown yesterday?

 

NID 308 seems to have consolidated both NID 41 and NID 42.

 

Along I-70, the NID 43/42 boundary near Bonner Springs is now the NID 43/308 boundary.  And along K-10, the NID 43/41 boundary near De Soto is also now the NID 43/308 boundary.  So, those boundaries have not changed, but the eastern side NIDs have switched over to NID 308.

 

Otherwise, downtown, The Plaza, Leawood, and Lenexa -- seemingly, the entire core metro area -- is now on NID 308.  The previous NID 41/42 boundary approximately at 75th St is no longer.

 

This could be good news for people who live or work near NID boundaries that cause them to miss incoming calls and burn battery life due to incessant registrations between two NIDs.  If Kansas City is any indication, many of those boundaries may be going away.

 

AJ

  • Like 2
Link to comment
Share on other sites

They all changed in Chicago when the 1x and EVDO work was done on a tower. I'm not sure if they are changing in other areas.

 

Sent from my EVO LTE

 

As we all know... Chicago has been a unique case compared to just about everywhere else in the country. Legacy and Network Vision boundaries have caused all sorts of issues that were unexpected.

Link to comment
Share on other sites

NID 308 seems to have consolidated both NID 41 and NID 42.

 

Along I-70, the NID 43/42 boundary near Bonner Springs is now the NID 43/308 boundary.  And along K-10, the NID 43/41 boundary near De Soto is also now the NID 43/308 boundary.  So, those boundaries have not changed, but the eastern side NIDs have switched over to NID 308.

 

Otherwise, downtown, The Plaza, Leawood, and Lenexa -- seemingly, the entire core metro area -- is now on NID 308.  The previous NID 41/42 boundary approximately at 75th St is no longer.

 

This could be good news for people who live or work near NID boundaries that cause them to miss incoming calls and burn battery life due to incessant registrations between two NIDs.  If Kansas City is any indication, many of those boundaries may be going away.

 

AJ

That's good to hear. Thanks for the information.

Link to comment
Share on other sites

NID 308 is spreading like wildfire.  Along K-10, the former NID 43/41 transition has leaped an additional two sites west -- from De Soto/Kill Creek past De Soto/Sunflower to Eudora.  So, the NID 43/308 effective boundary is now in the Wakarusa River floodplain just east of Lawrence.  We will have to wait and see if that is where it remains or if Lawrence is also assimilated.

 

I-70 has experienced a similar shift.  NID 308 has expanded from the Bonner Springs/K-7 site to include at least the Reno site.  I was not looking for any further NID 308 expansion, so I did not notice the change until I was right underneath the Reno site.  Thus, I missed the Lawrence Service Area site.  I will do a bit of drive testing today or tomorrow to clear up that discrepancy.

 

AJ

  • Like 4
Link to comment
Share on other sites

Well

 

NID 308 is spreading like wildfire.  Along K-10, the former NID 43/41 transition has leaped an additional two sites west -- from De Soto/Kill Creek past De Soto/Sunflower to Eudora.  So, the NID 43/308 effective boundary is now in the Wakarusa River floodplain just east of Lawrence.  We will have to wait and see if that is where it remains or if Lawrence is also assimilated.

 

I-70 has experienced a similar shift.  NID 308 has expanded from the Bonner Springs/K-7 site to include at least the Reno site.  I was not looking for any further NID 308 expansion, so I did not notice the change until I was right underneath the Reno site.  Thus, I missed the Lawrence Service Area site.  I will do a bit of drive testing today or tomorrow to clear up that discrepancy.

 

AJ

Well here's some more news on this for you, now my site in Gravois Mills, MO right on the lake is NID 308 from 41 and this is one of the few fully installed sites here in the ozarks. going to see what the rest have on my drive to work.

  • Like 1
Link to comment
Share on other sites

I just returned from my drive testing. Both Lawrence Service Area and Tonganoxie sites are still NID 43.

 

AJ

  • Like 1
Link to comment
Share on other sites

Well

 

Well here's some more news on this for you, now my site in Gravois Mills, MO right on the lake is NID 308 from 41 and this is one of the few fully installed sites here in the ozarks. going to see what the rest have on my drive to work.

The family and I went to the Shatto dairy farm tour yesterday in Osborn Mo and I noticed Osborn and Cameron Mo had NID 308 as well.

  • Like 1
Link to comment
Share on other sites

The family and I went to the Shatto dairy farm tour yesterday in Osborn Mo and I noticed Osborn and Cameron Mo had NID 308 as well.

 

Now, that is one honestly named dairy farm.  The cows were milked.  They ate.  And, of course, they shat.

 

:P

 

AJ

  • Like 1
Link to comment
Share on other sites

And, overnight, Lawrence has been absorbed into NID 308, too.  We are now one with the Borg.

 

AJ

  • Like 2
Link to comment
Share on other sites

And, overnight, Lawrence has been absorbed into NID 308, too. We are now one with the Borg.

 

AJ

 

I wonder if they are going to do this all over the country in the end.

 

 

Sent from Josh's iPhone 5 using Tapatalk 2

Link to comment
Share on other sites

I wonder if they are going to do this all over the country in the end.

 

Indeed, Josh, that is the widespread relevance of this thread.

 

AJ

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...