Jump to content

Sgs3 has a 'Death Grip'???


Ascertion

Recommended Posts

But does it have a "Death Blow"???

 

 

"When someone tries to blow you up, not because of who you are, but because of different reasons altogether..."

 

AJ

  • Like 1
Link to comment
Share on other sites

I think most phones will suffer from some sort of death grip, you would just have to hold it in an unconventional way which is why most won't know about it.

Link to comment
Share on other sites

I think most phones will suffer from some sort of death grip, you would just have to hold it in an unconventional way which is why most won't know about it.
<br />Why wouldn't they work around this and put the antennas at the top to avoid the hand interference
Link to comment
Share on other sites

Maybe the other diversity antenna is up there? ;) To have diversity you do have to space them out. If you had to ask me, I do wish the phones still had the pull out antenna when you needed to get an extra bit of signal. But alas, people think antennas are ugly, cell towers are ugly, routers shouldn't have antennas, etc, but then they complain because their phone won't work or their laptop won't work in the next room. Maybe it's because they voted down the palm tree antenna down the road and hid their router under the kitchen sink!

Link to comment
Share on other sites

"...So you cry... and then when you see the dancing, you cry again!..."

 

Sweet fancy Moses!

 

AJ

  • Like 1
Link to comment
Share on other sites

While I'm holding my phone in my living room (both hands on the bottom half of the device.)

 

You're obviously holding it wrong:). Antennagate redux, except since it's not an iPhone, the pundits are not going to pounce on it. All phones have the same problem to some degree, some more than others.

Link to comment
Share on other sites

I hold my GS3 a certain way and the 1x signal goes down, but then the 2nd 1x signal goes up. So it really doesn't matter, all things considered.

 

Also, when I do my device testing, I test them being held and on a flat surface untouched. I can tell you that every device I've tested is affected by being held, especially the Viper. That's why I test them both ways.

 

Robert via Nexus 7 with Tapatalk HD

  • Like 1
Link to comment
Share on other sites

I hold my GS3 a certain way and the 1x signal goes down, but then the 2nd 1x signal goes up. So it really doesn't matter, all things considered.

 

Also, when I do my device testing, I test them being held and on a flat surface untouched. I can tell you that every device I've tested is affected by being held, especially the Viper. That's why I test them both ways.

 

Robert via Nexus 7 with Tapatalk HD

The aosp Roms for the gs3 must disable the second antenna unless the signal threshold it displays via android status bar is not programmed to display the signal strength of the secondary antenna.

Link to comment
Share on other sites

Every phone will have this issue when you COVER THE ANTENNA ENTIRELY with absorbent material (like your body).

 

If anyone wants, I can tear just about any phone apart at work tomorrow and post pics, labeling what I know along the way. Can't upload them at work, S4GRU is blocked as a sports site (WTF?). Carrier-specific versions often are different from each other. The iFixit GS3 teardown for instance is for a GSM variant which is different from Sprint's.

Link to comment
Share on other sites

<br />Why wouldn't they work around this and put the antennas at the top to avoid the hand interference

 

If you look at the antenna diagrams for the S3, there is a receive only LTE antenna at the top of the phone, plus the Wifi/Bluetooth antennas on the top right of the phone. The 1X/EVDO and an LTE transmit/receive antenna are on the bottom. The reason for this if I remember correctly, is that most people hold their phone near the bottom when they are browsing/playing games (using data), so wifi and LTE receive antennas are on the top. When you are holding the phone for a call, you are more likely to be holding the headset towards the top, so they put the 1X/EVDO antennas near the microphone, where you are almost sure not to be holding the phone.

 

Here is an image of the antenna locations on the phone:

 

s3antennas_zps7d115527.png

  • Like 1
Link to comment
Share on other sites

If you look at the antenna diagrams for the S3, there is a receive only LTE antenna at the top of the phone, plus the Wifi/Bluetooth antennas on the top right of the phone. The 1X/EVDO and an LTE transmit/receive antenna are on the bottom. The reason for this if I remember correctly, is that most people hold their phone near the bottom when they are browsing/playing games (using data), so wifi and LTE receive antennas are on the top. When you are holding the phone for a call, you are more likely to be holding the headset towards the top, so they put the 1X/EVDO antennas near the microphone, where you are almost sure not to be holding the phone.

 

Here is an image of the antenna locations on the phone:

 

s3antennas_zps7d115527.png

 

Has anyone else noticed that the GS3 LTE receiver seems to be somewhat directional: When I aim the left side of the phone toward where I think the tower is, I seem to get about a -5 dBm RSRP signal strength improvement. Based on the diagram that Thomas L. posted, this seems plausible. I live in a somewhat fringe LTE area at the moment, so it may be just my imagination. I would be interested if anyone else has had the same experience.

Link to comment
Share on other sites

 

Has anyone else noticed that the GS3 LTE receiver seems to be somewhat directional: When I aim the left side of the phone toward where I think the tower is, I seem to get about a -5 dBm RSRP signal strength improvement. Based on the diagram that Thomas L. posted, this seems plausible. I live in a somewhat fringe LTE area at the moment, so it may be just my imagination. I would be interested if anyone else has had the same experience.

 

I've observed this with the Note 2 and my Nexus 4 as well.

 

Robert via Samsung Note II via Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

Has anyone else noticed that the GS3 LTE receiver seems to be somewhat directional: When I aim the left side of the phone toward where I think the tower is, I seem to get about a -5 dBm RSRP signal strength improvement.

 

I sense a Fox News headline coming: Samsung Galaxy S3, the left leaning phone for liberals.

 

;)

 

AJ

  • Like 3
Link to comment
Share on other sites

  • 3 weeks later...

But does it have a "Death Blow"???

 

 

"When someone tries to blow you up, not because of who you are, but because of different reasons altogether..."

 

AJ

 

Let me know when it builds a DEATH STAR!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...