Jump to content

Samsung Galaxy Nexus 4.2.1 upgrade


MacinJosh

Recommended Posts

Galaxy Nexus owners, the 4.2.1 official upgrade is coming soon!

 

It's already available for download from Google's own servers too.

 

According to users on Android Central, it has helped with the 3G/1X service quality too!

 

Update file is located here!

 

Source: Phone Arena

Link to comment
Share on other sites

Been running 4.2.1 for a while now and it runs great but I am really starting to hate my nexus. I thought battery life was pretty bad when it was running ICS but battery performance on JB is even worse.

Link to comment
Share on other sites

Been running 4.2.1 for a while now and it runs great but I am really starting to hate my nexus. I thought battery life was pretty bad when it was running ICS but battery performance on JB is even worse.

 

4.2.1 custom ROM's were draining my battery too much so I went back to stock rooted, but hopefully the official update will help. Otherwise I hope tech support over the phone will help me get a GS3 for all the trouble I've had with phones for the last year.

Link to comment
Share on other sites

Is it available OTA yet?

 

I was in about Rustin, Louisiana recently, terrible Sprint service when I had it and terrible roaming on the Nexus when I didn't.

It roamed on Verizon/Alltel (it said). The battery went flat within a few hours, terrible, even with Data sync disabled.

 

The next day I put the phone into home Sprint service only, so it didn't roam. After about 16 hours, the battery was at 53%, I didn't use the phone once, not even look at the screen.

I had my work phone, AT&T Nokia Lumia 920 with me, I used that a lot, after 16 hours, the battery was at 93%.

 

I'm also very disappointed in the Nexus phone, the second Samsung Nexus, the 2nd junk one, the first being the S 4G.

Edited by JoeJoeJoe
Link to comment
Share on other sites

I downloaded it last week and just fastbooted the GA02 radios to go with my CM10.1 builds. The combo has been running fine. I might actually flash the full GA02 build when I have the time to see if the battery draining GPS lock bug in most of the 4.2.1 roms is fixed.

Link to comment
Share on other sites

The next day I put the phone into home Sprint service only, so it didn't roam. After about 16 hours, the battery was at 53%, I didn't use the phone once, not even look at the screen.

I had my work phone, AT&T Nokia Lumia 920 with me, I used that a lot, after 16 hours, the battery was at 93%.

~32 hours of standby battery life? That... sounds about right for Android, in my experience. It can be gotten higher on most devices, but it takes some work.

 

Are you familiar with an app called "BetterBatteryStats"? If you're the DIY type, Google it and learn about wakelocks and whatnot.

Link to comment
Share on other sites

I had my work phone, AT&T Nokia Lumia 920 with me, I used that a lot, after 16 hours, the battery was at 93%.

 

 

Screenshot or it didn't happen.

 

Also, watch the rants. Rants of any sort are not allowed here.

Link to comment
Share on other sites

  • 2 weeks later...

My decommissioned GNex got updated around 6am CST this morning. Works nice, almost as good as my GNex GSM, its good to have the 4.2.1 features/improvements (Project Butter, slightly improved camera app, slicker notification pull down, etc), though I lose a decent stock clock widget and BW's toggle of Airplane mode.

 

Can't comment if the battery life is improved since it is decom-ed from the network - only wifi is enabled. If one really needs to know, it was fully charged this morning, and now I see it at 73%, but its been sitting at home, loney and somewhat unused (other than getting my low volume gmail and gv msgs throughout today).

 

Too bad an update like this can't fix its radio problems. <_<

Link to comment
Share on other sites

My decommissioned GNex got updated around 6am CST this morning. Works nice, almost as good as my GNex GSM, its good to have the 4.2.1 features/improvements (Project Butter, slightly improved camera app, slicker notification pull down, etc), though I lose a decent stock clock widget and BW's toggle of Airplane mode.

 

Can't comment if the battery life is improved since it is decom-ed from the network - only wifi is enabled. If one really needs to know, it was fully charged this morning, and now I see it at 73%, but its been sitting at home, loney and somewhat unused (other than getting my low volume gmail and gv msgs throughout today).

 

Too bad an update like this can't fix its radio problems. <_<

 

According to people on Android Central, it has fixed some of the radio issues.

 

Edit: I finally am getting the update downloading to my phone! I'm so happy!

Edited by MacinJosh
  • Like 1
Link to comment
Share on other sites

Really...okay, when my honeymooning days are over for my new GN2, then I'll switch over for a bit (or when a need is there, e.g. vacation or business trip) to the GNex...its updated, its ready, just needs to be back on my account and active.

 

Did you get it yet?

Link to comment
Share on other sites

Would someone with a GNex in an LTE area mind trying out my signal detector app to see if it will report the LTE serving cell IDs you're connected to? Details are in this thread: http://s4gru.com/ind...tation-tracker/

 

In the app, if you have an LTE connection and the code works, under/next to "LTE Cell ID" you should have two values separated by a space: a hexadecimal number ending in 01, 02, or 03 (which is unique within the Sprint network for a specific sector) and the physical cell ID (a decimal number between 0 and 503).

 

Thanks!

Link to comment
Share on other sites

Would someone with a GNex in an LTE area mind trying out my signal detector app to see if it will report the LTE serving cell IDs you're connected to? Details are in this thread: http://s4gru.com/ind...tation-tracker/

 

In the app' date=' if you have an LTE connection and the code works, under/next to "LTE Cell ID" you should have two values separated by a space: a hexadecimal number ending in 01, 02, or 03 (which is unique within the Sprint network for a specific sector) and the physical cell ID (a decimal number between 0 and 503).

 

Thanks![/quote']

 

I will download it tonight, and if I can't get to LA tomorrow morning, I'll try it the next weekend when I go down.

 

Sent from my Galaxy Nexus using Forum Runner

  • Like 1
Link to comment
Share on other sites

Galaxy Nexus owners, the 4.2.1 official upgrade is coming soon!

 

It's already available for download from Google's own servers too.

 

According to users on Android Central, it has helped with the 3G/1X service quality too!

 

Update file is located here!

 

Source: Phone Arena

how do you install this manually?

Link to comment
Share on other sites

how do you install this manually?

 

I'm not sure. I never really understood the instructions that I read on Android Central. I got the update pushed to my phone finally.

Link to comment
Share on other sites

how do you install this manually?

 

I forced the update on 2 phones by, stopping the Google Framework services app, clearing its data, dial the *#*#checkin#*#* number. enable framework app. dial checkin again.

 

Works for me, it might take a few tries.

Link to comment
Share on other sites

I forced the update on 2 phones by, stopping the Google Framework services app, clearing its data, dial the *#*#checkin#*#* number. enable framework app. dial checkin again.

 

Works for me, it might take a few tries.

what's the checkin number? is it device specific?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...