Jump to content

Clear 3G


nahum365

Recommended Posts

Clearwire has no native 3G service.

 

AJ

Link to comment
Share on other sites

Clearwire used Expedience 3G equipment by Motorola in their initial rollout of wireless internet and continues to operate that junk in the markets that they neglected to upgrade to WiMax.

 

Just ask someone in one of these markets:

  • Aberdeen/Hoquiam WA
  • Anchorage AK
  • Anderson CA
  • Bend OR
  • Carson City NV
  • Central Point OR
  • Chico CA
  • Chippewa Falls WI
  • Clarkston WA
  • Cohasset Beach/Wesport WA
  • Corning CA
  • Dayton OH
  • Duluth MN
  • Eagle River AK
  • Eau Claire WI
  • Fernley NV
  • Grants Pass OR
  • Hermantown MN
  • Klamath Falls OR
  • Incline Village NV
  • Jacksonville OR
  • Lewiston ID
  • Longview TX
  • Madras OR
  • Medford OR
  • Middletown OH
  • Minden/Gardnerville NV
  • Moscow ID
  • Myrtle Creek OR
  • Orland CA
  • Paradise CA
  • Prineville OR
  • Proctor MN
  • Pullman WA
  • Red Bluff CA
  • Redding CA
  • Redmond OR
  • Reno/Sparks NV
  • Roseburg OR
  • St. Cloud MN
  • Shasta Lake CA
  • Sisters OR
  • South Lake Tahoe CA
  • Springfield OH
  • Stateline/Kingsbury NV
  • Superior WI
  • Wenatchee WA

Yes, notice the St. Cloud, MN.

 

Unless the use of OFDM makes it not 3G...

  • Like 2
Link to comment
Share on other sites

Clearwire's Pre WiMax technology is Expedience. While one could argue that Motorola Expedience is not a 3G technology per se, it had 3G performance characteristics.

 

Robert via Nexus 7 using Forum Runner

Link to comment
Share on other sites

  • 3 weeks later...

Sorry for not replying to this for so long, never saw the replies. A friend gave me a Clear 3G+4G device because he had no use for it anymore, so I just wanted to know about the 3G. I think its Sprint 3G though... I haven't activated it yet, not planning to. I had guessed that it was Sprint 3G based on Clear's 4G coverage map- just about every site in my area is collocated with Sprint.

Link to comment
Share on other sites

This is one the reasons I greatly dislike the generic use of "3G" and "4G." For example, AT&T's so called "3G" and "4G" can be the very same W-CDMA airlink, and its "4G" can be either W-CDMA or LTE.

 

So, I advocate use of the actual name of the technology rather than some generic "G" moniker. In this case, Clear's "3G" is Sprint EV-DO roaming, and its "4G" is WiMAX native coverage.

 

AJ

  • Like 3
Link to comment
Share on other sites

This is one the reasons I greatly dislike the generic use of "3G" and "4G." For example, AT&T's so called "3G" and "4G" can be the very same W-CDMA airlink, and its "4G" can be either W-CDMA or LTE.

 

So, I advocate use of the actual name of the technology rather than some generic "G" moniker. In this case, Clear's "3G" is Sprint EV-DO roaming, and its "4G" is WiMAX native coverage.

 

AJ

AT&T being the biggest offender of that. In my 4 years with them, my "4G" has never seen the upper side of 4Mbps. Granted, my two months with Sprint haven't gotten close to my average 2Mbps with ATT, but its getting there.

 

cIXqo.png

 

Non-NV site there. At least it used to be non NV... It should appear in the complete sites map tomorrow.

Link to comment
Share on other sites

AJ is absolutely correct. Clear 3G was always Sprint EVDO roaming. They never referred to their Expedience service as 3G. It just had the Clearwire brand. AS far as I know, there was never multi-technology devices ever created for Clearwire Expedience. I believe all Clearwire Expedience devices operated on the Expedience network only.

 

Prior to WiMax, the Expedience network was pretty large, covering approximately 75 markets in America (including Alaska & Hawaii). However, most of it was converted to WiMax. The only remaining Expedience markets still operating Scott listed above.

 

Robert

Link to comment
Share on other sites

AJ is absolutely correct. Clear 3G was always Sprint EVDO roaming. They never referred to their Expedience service as 3G. It just had the Clearwire brand. AS far as I know, there was never multi-technology devices ever created for Clearwire Expedience. I believe all Clearwire Expedience devices operated on the Expedience network only.

 

Prior to WiMax, the Expedience network was pretty large, covering approximately 75 markets in America (including Alaska & Hawaii). However, most of it was converted to WiMax. The only remaining Expedience markets still operating Scott listed above.

 

Robert

So if I ever activate it (which I most likely won't), I would get Sprint NV 3G and Clear WiMax? Looks like my Voyager is going on eBay! EDIT: Gah, still no line breaks in Win8...

Link to comment
Share on other sites

Prior to WiMax, the Expedience network was pretty large, covering approximately 75 markets in America (including Alaska & Hawaii). However, most of it was converted to WiMax. The only remaining Expedience markets still operating Scott listed above.

 

Robert

 

You are absolutely right. Many existing CLEAR 4G WiMAX Markets was once Clearwire Expedience Markets.

Link to comment
Share on other sites

What were the speeds on Expedience?

 

Not particularly expeditious.

 

;)

 

AJ

Link to comment
Share on other sites

I averaged 1.5-2Mbps in Nevada on my rural Expedience site back in 2006-2007.

 

Robert

 

Not bad. A lot better then what some people are dealing with here in 2012. Then again, there weren't millions of devices on Expediance.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...