Jump to content

Everything 800mhz (1xA, LTE, coverage, timeline, etc)


Recommended Posts

every new site in northern ky has 800 voice active this is a samsung market though it made a WORLD of difference for my in house call drop rates as the towers around here were basically at the 1900 mhz spectrum max distance where you would go down to 1 or no bars then drop for a sec then pick up the new tower 2 steps later

 

It is like that here, too. The sites are spaced almost exactly a few hairs short of the next. Once 800 mhz goes online, I can only imagine how full the network coverage will be.

Link to comment
Share on other sites

Some information we have received regarding the CDMA 800 deployment.

 

...

In areas that have limited spectrum in the 800 band, Sprint will focus on LTE rather than CDMA. In areas that have the additional spectrum, they will also deploy CDMA. 

...

 

That's the biggest change part to me. I never would have expected them to do LTE over voice.

Link to comment
Share on other sites

That part seemed odd to me as well. But if the future is VoLTE, then that would make sense eventually.

 

VoLTE is voice over LTE, not LTE over voice. Regardless the statement was in regards to spectrum. When spectrum is limited in a market, LTE carriers will be deployed over additional voice carriers. Let's try not to confuse the readers into thinking Sprint is jumping on the VoLTE bandwagon.

Link to comment
Share on other sites

VoLTE is voice over LTE, not LTE over voice. Regardless the statement was in regards to spectrum. When spectrum is limited in a market, LTE carriers will be deployed over additional voice carriers. Let's try not to confuse the readers into thinking Sprint is jumping on the VoLTE bandwagon.

I think what he's saying is that since Sprint has already said that eventually they'll deploy VoLTE, it makes sense for them to chose LTE over 1x in spectrum constrained markets because eventually they can launch VoLTE in those markets. The other way around of course isn't possible.

 

Sent from my SPH-L710 using Tapatalk 4

 

 

Link to comment
Share on other sites

VoLTE is voice over LTE, not LTE over voice. Regardless the statement was in regards to spectrum. When spectrum is limited in a market, LTE carriers will be deployed over additional voice carriers. Let's try not to confuse the readers into thinking Sprint is jumping on the VoLTE bandwagon.

 

I know very well what VoLTE is.... the comment was in reference to choosing to deploy LTE rather than [over] voice. As Thomas stated above. If VoLTE really is the future, than it would make sense to deploy LTE in the lower spectrum instead of voice. 

Link to comment
Share on other sites

Guys, the answer is simple.  People do not talk on the phone much anymore.  If you do, you are a Chatty Patty.

 

data > voice

 

AJ

  • Like 2
Link to comment
Share on other sites

I think what he's saying is that since Sprint has already said that eventually they'll deploy VoLTE, it makes sense for them to chose LTE over 1x in spectrum constrained markets because eventually they can launch VoLTE in those markets. The other way around of course isn't possible.

 

Sent from my SPH-L710 using Tapatalk 4

 

Maybe, but I'd rather have 3x3 LTE800 with 1x800 than 5x5 LTE800 with no 1x800. 800 is important for fallback coverage on sites that have to cover a lot of territory or for in building penetration. EVDO will disappear long before 1x due 1x having superior coverage properties and LTE is a far more efficient use of spectrum than EVDO. 1xA will still have advantage in usable coverage. Even with the move to VoLTE, I'd expect to see Sprint keep a channel of 1x800 in most places for quite a long time.

Link to comment
Share on other sites

Guys, the answer is simple.  People do not talk on the phone much anymore.  If you do, you are a Chatty Patty.

 

data > voice

 

AJ

There are still plenty of folks out there clocking 3000 minutes per line per month. That just happens to use a lot less network capacity than "unlimited data" and streaming video.
Link to comment
Share on other sites

There are still plenty of folks out there clocking 3000 minutes per line per month. That just happens to use a lot less network capacity than "unlimited data" and streaming video.

I use about 600 minutes a month sometimes more and I consider that light, but back on topic still no 1x800 here I wanna get rid of this airave. :(

Link to comment
Share on other sites

The people talking massive minutes, aren't that likely to switch to VoLTE phones anyway.

 

Personally I'm not a big believer in CDMA Forever in my own usage, but I'd say that getting legacy CDMA flip phone users to switch will be really hard. Henceforth Sprint saying that they won't shut down CDMA until 2021 or later.

Link to comment
Share on other sites

I think 1x800 may be turned on permanently in the dc market. Turned my phone on and connected to channel 476. The SID is 22435

 

Edit: I guess I jumped the gun. It's no longer on. I was excited when I saw the 22435 SID since we had been on the testing SID 22429 I believe.

Link to comment
Share on other sites

Your phone caches the tower and frequency so your phone connects faster. Prl update will clear that cache with no cache 800 scans first. Digiblur wrote something up about it I think it was in the columbus market in early August.

Link to comment
Share on other sites

I believe now that our phone will only get an 800 signal when we lose 1900. And even once we lock the 800 signal. Our phone continually scans for a 1900 signal.

once i lock 1x800 i stay on that till i can't use that anymore i've even passed a legacy tower and still stayed on the 1x800 for a few miles after i passed the legacy tower i have the S3 

Link to comment
Share on other sites

I believe now that our phone will only get an 800 signal when we lose 1900. And even once we lock the 800 signal. Our phone continually scans for a 1900 signal.

 

That's only Iphones and other non-LTE devices that have 800smr support that do that.

Link to comment
Share on other sites

I believe now that our phone will only get an 800 signal when we lose 1900. And even once we lock the 800 signal. Our phone continually scans for a 1900 signal.

That's only Iphones and other non-LTE devices that have 800smr support that do that.

 

God has a special place for iPhones...

 

AJ

  • Like 1
Link to comment
Share on other sites

Do you guys think they are going 4g only with 800 smr in some parts of the country because they already have such extensive 1x roaming? So if they develop 800 4g in those markets for data and just leave voice roaming?

Link to comment
Share on other sites

Do you guys think they are going 4g only with 800 smr in some parts of the country because they already have such extensive 1x roaming? So if they develop 800 4g in those markets for data and just leave voice roaming?

 

Highly doubt that.  They aren't going to to pay roaming cost if they can provide the coverage themselves using resources already in place.

Link to comment
Share on other sites

Highly doubt that.  They aren't going to to pay roaming cost if they can provide the coverage themselves using resources already in place.

But that's the thing, they were talking about where sprint is spectrum lacking, so the resources aren't already in place coverage wise. So I was wonderin if sprints plan in those areas is to just flip on smr lte and leave some voice traffic on roaming. Because like mentioned above no one talks on the phone anymore lol.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...