Jump to content

VoLTE vs 1x Advanced


Recommended Posts

So it's my understanding that Sprint is sticking with 1x Advanced for calling due to the fact that it's more efficient than LTE. This will have some interesting implications with pretty much every other carrier moving to VoLTE. Are any other carriers using 1x Advanced? How will this impact their roaming agreement with Verizon? I suppose Verizon will have their 1x running for quite a while yet even once they start using VoLTE.

 

EDIT - Also, we can assume at some point Sprint will start using VoLTE, no?

Link to comment
Share on other sites

VoLTE is still an unknown and mostly unproven technology. MetroPCS started rolling it out for certain phones in LTE markets, but the major players will wait for the technology to mature

Link to comment
Share on other sites

So it's my understanding that Sprint is sticking with 1x Advanced for calling due to the fact that it's more efficient than LTE. This will have some interesting implications with pretty much every other carrier moving to VoLTE. Are any other carriers using 1x Advanced? How will this impact their roaming agreement with Verizon? I suppose Verizon will have their 1x running for quite a while yet even once they start using VoLTE.

 

EDIT - Also, we can assume at some point Sprint will start using VoLTE, no?

 

I don't think i've heard of any other US Carriers using 1x Advanced right now. But if networks have been so well off until now using solely CDMA 1x, then moving over the the Advanced should make their network that much more capable. But if there is one thing that I'm a bit skeptical about with VoLTE would be the potential for drastically reduced talk times due to LTE being much more power hungry than CDMA 1x Advanced.

 

Does anyone know how VoLTE would impact battery life?

Link to comment
Share on other sites

So it's my understanding that Sprint is sticking with 1x Advanced for calling due to the fact that it's more efficient than LTE. This will have some interesting implications with pretty much every other carrier moving to VoLTE. Are any other carriers using 1x Advanced? How will this impact their roaming agreement with Verizon? I suppose Verizon will have their 1x running for quite a while yet even once they start using VoLTE.

 

EDIT - Also, we can assume at some point Sprint will start using VoLTE, no?

 

So apparently VoLTE still has a long way to go. MetroPCS announced in March this year that it would be the first carrier to transition over to VoLTE in 2H 2012. However recent reports in September show that VoLTE is just not there yet and MetroPCS has delayed VoLTE deployment until next Spring. This tells me that there are still complications with VoLTE. I hope Sprint doesn't jump the gun on any VoLTE deployment. I hope Sprint waits until 2014 at least once Network Vision is done to start considering VoLTE. Let AT&T, Verizon, TMobile be the guinea pigs and iron the VoLTE bugs.

 

March 2012 article

http://www.fiercebro...2012/2012-03-25

 

September 2012 article

http://www.fiercewir...nths/2012-09-20

  • Like 1
Link to comment
Share on other sites

Sprint doesn't have the tower spacing to do volte yet.

 

Sent from my C64 w/Epyx FastLoad cartridge

 

Exactly. This is a commonly misunderstood point. VoLTE tower spacing is significantly tighter on the same frequency as 1x. VoLTE is only good to approximately -93dBm RSSI, whereas 1x voice can be used to roughly -103dBm. 10dBm is huge and represents a lot of coverage difference.

 

Sprint would have to run VoLTE on LTE 800 just to get in the ballpark of CDMA 1900 coverage. And then it would be nowhere near as good as 1x is on 800.

 

Robert via ICS Kindle Fire using Tapatalk

 

 

  • Like 3
Link to comment
Share on other sites

I keep hearing reports about a "verizon flip-phone that's LTE only", but I have a feeling that's rather unfounded.
There was an article in the past six months where Verizon said they were working on VoLTE and even flip phones that were LTE only. I think the timeline for release was 2013.

 

Robert via ICS Kindle Fire using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites

 

 

Exactly. This is a commonly misunderstood point. VoLTE tower spacing is significantly tighter on the same frequency as 1x. VoLTE is only good to approximately -93dBm RSSI, whereas 1x voice can be used to roughly -103dBm. 10dBm is huge and represents a lot of coverage difference.

 

Sprint would have to run VoLTE on LTE 800 just to get in the ballpark of CDMA 1900 coverage. And then it would be nowhere near as good as 1x is on 800.

 

Robert via ICS Kindle Fire using Tapatalk

 

So then Verizon would have the same issues with spacing on their 700mhz, no? They don't have great density yet, correct?

Link to comment
Share on other sites

Exactly. This is a commonly misunderstood point. VoLTE tower spacing is significantly tighter on the same frequency as 1x. VoLTE is only good to approximately -93dBm RSSI, whereas 1x voice can be used to roughly -103dBm. 10dBm is huge and represents a lot of coverage difference.

 

Sprint would have to run VoLTE on LTE 800 just to get in the ballpark of CDMA 1900 coverage. And then it would be nowhere near as good as 1x is on 800.

 

Robert via ICS Kindle Fire using Tapatalk

 

When you put it that way, it seems like VoLTE isn't even worth it if 1x would have much greater coverage. If thats the case Sprint should stick with HD Voice over 1x. But maybe I am wrong. What are the benefits that VoLTE would provide over using HD Voice on 1x?

Link to comment
Share on other sites

When you put it that way, it seems like VoLTE isn't even worth it if 1x would have much greater coverage. If thats the case Sprint should stick with HD Voice over 1x. But maybe I am wrong. What are the benefits that VoLTE would provide over using HD Voice on 1x?

An advantage is that 4G voice & data could be simultaneously on one antenna, which allows for smaller, probably more power efficient phones.
Link to comment
Share on other sites

An advantage is that 4G voice & data could be simultaneously on one antenna, which allows for smaller, probably more power efficient phones.

 

That makes sense. Although a couple posts back I stated that one of the things I'm skeptical about with VoLTE would be the potential for reduced talk times due to LTE being much more power hungry than a 1x CDMA radio. Would that still be the case?

 

 

Link to comment
Share on other sites

That makes sense. Although a couple posts back I stated that one of the things I'm skeptical about with VoLTE would be the potential for reduced talk times due to LTE being much more power hungry than a 1x CDMA radio. Would that still be the case?

I don't know. Certainly seems plausible.

Link to comment
Share on other sites

 

So then Verizon would have the same issues with spacing on their 700mhz' date=' no? They don't have great density yet, correct?[/quote']

 

That's correct. Verizon VoLTE would offer significantly reduced coverage than VZW 1x service in most instances. VZW VoLTE on LTE 750 would have coverage roughly similar to their PCS spacing, but nowhere near as much as their Cellular spacing (which is the lion share of their 1x deployments). And their VoLTE on AWS would offer pretty anemic coverage, but it would most likely always be redundant.

 

Robert via CM9 Kindle Fire using Forum Runner

  • Like 1
Link to comment
Share on other sites

 

When you put it that way' date=' it seems like VoLTE isn't even worth it if 1x would have much greater coverage. If thats the case Sprint should stick with HD Voice over 1x. But maybe I am wrong. What are the benefits that VoLTE would provide over using HD Voice on 1x?[/quote']

 

Once VoLTE is worked out, Sprint could use it as an overlay. It could become the major carrier of voice traffic, and Sprint could reduce its number of voice carriers. Just leaving one 1x carrier on CDMA 800 for distance and penetration, to cover area where VoLTE stops short.

 

However, since 1x Advanced is notably more efficient than VoLTE, Sprint should ride that gravy train all the way to the end of the line. They probably should start adding VoLTE capability to devices in the next year or so, so they can shunt additional traffic as needed to VoLTE without deploying more spectrum robbing 1x carriers. But at this point, this is nowhere near a priority.

 

1x Advanced is a voice workhorse. Whose voice capacity and coverage are just unrivaled at this point. HD voice can be run over 1x the same as VoLTE.

 

Robert via CM9 Kindle Fire using Forum Runner

  • Like 2
Link to comment
Share on other sites

 

That makes sense. Although a couple posts back I stated that one of the things I'm skeptical about with VoLTE would be the potential for reduced talk times due to LTE being much more power hungry than a 1x CDMA radio. Would that still be the case?

 

 

With 28nm chips, it seems like CDMA and LTE battery life have been the same. I stay in CDMA/LTE mode on my GS3, and do not notice a difference in battery life whether I have a 3G or 4G connection. However, if I have a weak 3G connection, my battery will drain pretty fast.

 

Robert via CM9 Kindle Fire using Forum Runner

  • Like 1
Link to comment
Share on other sites

1x Advanced is a voice workhorse. Whose voice capacity and coverage are just unrivaled at this point. HD voice can be run over 1x the same as VoLTE.

So, what exactly is "HD Voice"? What handsets can do it, and when will it roll out? There's surprisingly little information I can pull up about it, other than it's "clearer" or something, but no indication of how it works.

Link to comment
Share on other sites

So' date=' what exactly is "HD Voice"? What handsets can do it, and when will it roll out? There's surprisingly little information I can pull up about it, other than it's "clearer" or something, but no indication of how it works.[/quote']

 

The EVO LTE does HD voice. It uses two microphones and I think its own compression codec. But the device on the other end has to also have it for all the advantages to be noticeable. It is clearer than land line communication.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

VoLTE is only good to approximately -93dBm RSSI, whereas 1x voice can be used to roughly -103dBm. 10dBm is huge and represents a lot of coverage difference.

 

As I detailed in my article this summer, part of the problem is that LTE RSSI almost always gets inflated compared to CDMA1X RSSI because LTE carrier bandwidths are almost always greater.

 

http://s4gru.com/index.php?/blog/1/entry-308-rssi-vs-rsrp-a-brief-lte-signal-strength-primer/

 

This is especially true with current VZW LTE, which has a 10 MHz carrier bandwidth, compared to CDMA1X, which always has a 1.25 MHz carrier bandwidth. Even if all other factors were the same, VZW LTE carrier RSSI would measure ~9 dB greater than CDMA1X carrier RSSI because signal strength is a measure of field strength integrated over bandwidth (and VZW LTE is ~8x bandwidth of CDMA1X). What that does is create a mirage, making LTE signal strength appear greater and more usable than it is in actuality. If you want to convert LTE RSSI to a more CDMA1X RSSI centered measurement, subtract 9 dB from VZW LTE RSSI (or subtract 6 dB from Sprint LTE RSSI). Lo and behold, that VZW LTE -93 dBm RSSI drops to -102 dBm RSSI.

 

AJ

  • Like 6
Link to comment
Share on other sites

Once VoLTE is worked out, Sprint could use it as an overlay. It could become the major carrier of voice traffic, and Sprint could reduce its number of voice carriers. Just leaving one 1x carrier on CDMA 800 for distance and penetration, to cover area where VoLTE stops short.

 

However, since 1x Advanced is notably more efficient than VoLTE, Sprint should ride that gravy train all the way to the end of the line. They probably should start adding VoLTE capability to devices in the next year or so, so they can shunt additional traffic as needed to VoLTE without deploying more spectrum robbing 1x carriers. But at this point, this is nowhere near a priority.

 

1x Advanced is a voice workhorse. Whose voice capacity and coverage are just unrivaled at this point. HD voice can be run over 1x the same as VoLTE.

 

Robert via CM9 Kindle Fire using Forum Runner

 

Thanks, I find this very interesting. My biggest question regarding it all would be.. if you run a hybrid of both 1xA and VoLTE, would traffic flow seamlessly between both or would you have dropped calls? For example, I'm on the street, great LTE signal is being received and I'm using VoLTE. If I walk into a building and then need to drop back to 800mhz 1xA, would the handoff be seamless?

Link to comment
Share on other sites

Thanks, I find this very interesting. My biggest question regarding it all would be.. if you run a hybrid of both 1xA and VoLTE, would traffic flow seamlessly between both or would you have dropped calls? For example, I'm on the street, great LTE signal is being received and I'm using VoLTE. If I walk into a building and then need to drop back to 800mhz 1xA, would the handoff be seamless?

 

Also, this brings up a very good point regarding low frequency spectrum. Moving forward towards LTE, low frequency spectrum becomes all that much more valuable based on the lack of strength of LTE signals to maintain decent in-building coverage. This puts carriers such as T-Mobile at a very distinct disadvantage.

Link to comment
Share on other sites

 

Also' date=' this brings up a very good point regarding low frequency spectrum. Moving forward towards LTE, low frequency spectrum becomes all that much more valuable based on the lack of strength of LTE signals to maintain decent in-building coverage. This puts carriers such as T-Mobile at a very distinct disadvantage.[/quote']

 

Yes. Tmo and VoLTE would not be a good combination at this point. At least not as their sole voice connection.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

 

Thanks' date=' I find this very interesting. My biggest question regarding it all would be.. if you run a hybrid of both 1xA and VoLTE, would traffic flow seamlessly between both or would you have dropped calls? For example, I'm on the street, great LTE signal is being received and I'm using VoLTE. If I walk into a building and then need to drop back to 800mhz 1xA, would the handoff be seamless?[/quote']

 

Good question. I don't know anything about 1xA/VoLTE voice hand offs. I think it would be a challenge. VoLTE being all IP. It may require an eHRPD kind of system like EVDO/LTE data hand off.

 

Robert via CM9 Kindle Fire using Forum Runner

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...