Jump to content

Network Vision/LTE - Tampa Market


Feech

Recommended Posts

Welcome to Gods Waiting room Tampateacher, nice to have you on board. All I can say is when you pick up a 4G signal start Sensorly and it will record back to its website for all of us to see. If you have some time when you do see the 4G icon spend some of it exploring the area where you are to see how far the signal goes in all directions. Other than that? Have fun waiting like the rest of us. Shouldn't be too much longer though.

Link to comment
Share on other sites

so making it a lot faster

 

Another analogy would be:

The cell site is like your home wireless router. You can power it up and connect to it with devices, but without the internet cord hooked up to it, the router is mostly useless.

 

Without backhaul, the cell site will not allow calls, texts, internet etc...

 

It also is defined in the FAQ. A link is in my signature.

  • Like 1
Link to comment
Share on other sites

 

 

Another analogy would be:

The cell site is like your home wireless router. You can power it up and connect to it with devices, but without the internet cord hooked up to it, the router is mostly useless.

 

Without backhaul, the cell site will not allow calls, texts, internet etc...

 

It also is defined in the FAQ. A link is in my signature.

so how will this affect my phone
Link to comment
Share on other sites

 

 

I'm not really sure what you're not understanding here. Every cell site in the country has some sort of backhaul in place that is used for phone calls, texts, and data. Without it, there IS no phone.

ok I took as if we didn't have it... Haha sorry I get it now
Link to comment
Share on other sites

ok I took as if we didn't have it... Haha sorry I get it now

 

The Network Vision overhauls are putting better backhaul in place. The current internet sources for Sprint sites are too slow to keep up with demand, so they are putting in mostly fiber and microwave sources to provide much faster internet speeds and greater bandwidth to accommodate more users. So in that sense, the new backhaul will make your connection faster.

Link to comment
Share on other sites

 

 

The Network Vision overhauls are putting better backhaul in place. The current internet sources for Sprint sites are too slow to keep up with demand, so they are putting in mostly fiber and microwave sources to provide much faster internet speeds and greater bandwidth to accommodate more users. So in that sense, the new backhaul will make your connection faster.

so it can be more consistent with more people on the network.
Link to comment
Share on other sites

Heading to the beach see if anything is going on over there

 

Sent from my EVO using Tapatalk 2

 

i drive the beach every day.they have awesome coverage the whole way and strong wimax :( and pretty solid over 1 meg download speeds all the time i actually enjoy the coverage there. but it shows it can only handle that size population. gulf blvd that is.

 

?

on another note anyone notice that sensorly shades in all the area by shady tower when you zoom out allot ( might explain how company come up with crazy coverage maps lol

Edited by TuX
Link to comment
Share on other sites

So we have our site in Sprint Hill in our update but I'm still mad (not really). Wish we knew more about this site like how long the work has been done there, how long it has been giving a signal, who was it that put it on Sensorly, is that person actively looking for Sprint LTE or was it a fluke?

 

It may tell us something about the other sites we know with panels and cabinets done. Robert said that this site was not accepted last week if we had got an update from what he had saw, but this week it turned up. So it makes me think the Spring Hill site could have been up for a month or longer possibly and that may actually make some sense. So where are the other sites then?

Link to comment
Share on other sites

So we have our site in Sprint Hill in our update but I'm still mad (not really). Wish we knew more about this site like how long the work has been done there, how long it has been giving a signal, who was it that put it on Sensorly, is that person actively looking for Sprint LTE or was it a fluke?

 

It may tell us something about the other sites we know with panels and cabinets done. Robert said that this site was not accepted last week if we had got an update from what he had saw, but this week it turned up. So it makes me think the Spring Hill site could have been up for a month or longer possibly and that may actually make some sense. So where are the other sites then?

 

We could easily have sites scattered here and there. Very exciting and frustrating at the same time.

Link to comment
Share on other sites

I agree but we have been looking like crazy. All of us have been. I know over in some areas of the Tampa market and S/W Florida especially that you would have to know where the site is and drive to it. What I mean is you wouldn't just casually come across it during your daily drive.

 

In Pinellas county though you can almost see every tower from the main routes through the county. Even that one in Spring Hill is on 19 definitely a main street. Only reason we missed that is because we don't have anyone that far north and who the heck would think that would be first. Which makes me think it's not the first

 

Sent from my EVO using Tapatalk 2

 

 

Link to comment
Share on other sites

The Spring Hill site is definitely the first one inspected in the Tampa market. I had a heads up from a source two days before it showed up on Sensorly. I marked it as "In Progress" in the database, but didn't get around to updating the map. That source says it was the only one where Ericsson was ready for inspection in the Tampa market to date.

 

More may go live this week and more acceptance inspections called for, but it was likely that no other sites were live in the Tampa market last week.

 

Robert via Nexus 7 on Tapatalk

 

 

Link to comment
Share on other sites

So we have our site in Sprint Hill in our update but I'm still mad (not really). Wish we knew more about this site like how long the work has been done there, how long it has been giving a signal, who was it that put it on Sensorly, is that person actively looking for Sprint LTE or was it a fluke?

 

It may tell us something about the other sites we know with panels and cabinets done. Robert said that this site was not accepted last week if we had got an update from what he had saw, but this week it turned up. So it makes me think the Spring Hill site could have been up for a month or longer possibly and that may actually make some sense. So where are the other sites then?

 

I have a sneaking suspicion that the Ericsson/Sprint Engineer that checked off the site did a little Sensorly action. because it was only at the tower. Basically like throwing meat to a pack of wild dogs saying "Go get it!"

  • Like 1
Link to comment
Share on other sites

I agree but we have been looking like crazy. All of us have been. I know over in some areas of the Tampa market and S/W Florida especially that you would have to know where the site is and drive to it. What I mean is you wouldn't just casually come across it during your daily drive.

 

In Pinellas county though you can almost see every tower from the main routes through the county. Even that one in Spring Hill is on 19 definitely a main street. Only reason we missed that is because we don't have anyone that far north and who the heck would think that would be first. Which makes me think it's not the first

 

Sent from my EVO using Tapatalk 2

 

That Spring Hill tower doesn't give coverage on 19 btw.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...