Jump to content

First iPhone LTE post


xenadu

Recommended Posts

 

 

All LTE devices use SIMs -- micro SIMs, nano SIMs, embedded SIMs, etc. The question is whether the iPhone 5 has a removable SIM, as many other Sprint LTE devices do not. Regardless, it does not need a removable SIM to roam internationally.

 

AJ

 

Sorry, I should have clarified but in my mind (and most consumers) SIM means removable SIM. An internal SIM is no better than ESID and may as well not exist because it removes everything that makes a SIM useful.

 

Also reporting that I am seeing interesting behavior here at my house. I appear to be on the edge of LTE coverage from a distant tower in certain rooms of the house. In those rooms I get 1-2 bars and LTE on the display, with download speeds of 6.5Mbps and -112db to -117db signal. *But* if I try to place a voice call it immediately swaps over to the Airave and the bars jumps to the full 5 bars... So I may be wrong about the bars, it may actually be displaying the LTE signal strength when on LTE, it just seems to prefer to jump to 3G if the LTE signal is marginal which would be the correct choice except for Sprint's awful non-NV tower situation. I also notice that it doesn't want to connect to my Airave on 3G (wifi turned off), after making a call it stays with the o 1X indicator for a while, probably looking for the LTE signal it lost earlier.

 

 

I can also confirm that the *3001#12345#* debug code works on LTE and brings up an entirely different menu that seems to have more information. LTE was seen on Band Class 25, which I believe is the PCS G band. This debug menu does not seem to show the EVDO/1X info anywhere. I also noticed it has to connect somewhere, presumably it is connecting to the tower to download some of the information. It may be that the carrier is fully in control of what is on this screen, not sure yet.

  • Like 1
Link to comment
Share on other sites

it switches to 3g because voice over LTE is not supported yet

 

Yeah I knew that, it was more about the signal bars... my earlier post was wrong about the bars displaying the CDMA 1X signal strength, they display the current signal strength for whatever connection is active so when LTE is active it is showing you LTE strength, even though in the background it's CDMA 1X connection is far stronger. It only shows that signal strength when it switches over to CDMA to make a voice call.

Link to comment
Share on other sites

Yeah I knew that, it was more about the signal bars... my earlier post was wrong about the bars displaying the CDMA 1X signal strength, they display the current signal strength for whatever connection is active so when LTE is active it is showing you LTE strength, even though in the background it's CDMA 1X connection is far stronger. It only shows that signal strength when it switches over to CDMA to make a voice call.

 

That sounds like a good feature that i wish android phones had. Actually i think they should go back to the days where there were 2 signal strength indicators, that would be much more useful in my opinion.

  • Like 2
Link to comment
Share on other sites

The iPhone 5 contains a SIM with a Sprint logo. If it's ejected you get a "no SIM" warning and it appears the radios disconnect from the network.

 

Did you try to make a call after you took out the SIM card? If it won't go thru this will be an interesting turn of events.

Link to comment
Share on other sites

Did you try to make a call after you took out the SIM card? If it won't go thru this will be an interesting turn of events.

So, the answer is that you can make a call. You can't see signal strength bars (says No SIM), but you can make calls. Also tried field test and that worked, too.

Link to comment
Share on other sites

 

So, the answer is that you can make a call. You can't see signal strength bars (says No SIM), but you can make calls. Also tried field test and that worked, too.

 

Only on CDMA, LTE requires the SIM same as GSM. I'll test this tonight and see if it works for me.

Link to comment
Share on other sites

So, the answer is that you can make a call. You can't see signal strength bars (says No SIM), but you can make calls. Also tried field test and that worked, too.

 

Wow. That could get annoying. I like seeing my signal bars, lol.

 

Do you know anyone with an at&t nanoSIM from their iPhone 5 you could use to test and see if the Sprint version is unlocked like the Verizon version? If it is, that would be awesome.

Link to comment
Share on other sites

 

Wow. That could get annoying. I like seeing my signal bars, lol.

 

Do you know anyone with an at&t nanoSIM from their iPhone 5 you could use to test and see if the Sprint version is unlocked like the Verizon version? If it is, that would be awesome.

 

When I find an AT&T phone, I'll give it a go. Or maybe I will trim one of my existing SIMs. I would like to see that it's unlocked as well, but my understanding is that Sprint will unlock the phone for international travel on request?

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Here are some Speed Test results from the only LTE I've found so far -- a very tiny patch of Westlake, TX:

 

Test Date: Sep 23, 2012 1:25 PM

Connection Type: Cellular

Server: Fort Worth, TX

Download: 7.99 Mbps

Upload: 7.50 Mbps

Ping: 177 ms

 

External IP: 66.87.97.145 (spcsdns.net)

Latitude: 32.9808

Longitude: -97.1716

 

329995728.png

IMG_1335.png

IMG_1336.png

  • Like 2
Link to comment
Share on other sites

Here are some Speed Test results from the only LTE I've found so far -- a very tiny patch of Westlake, TX:

 

Test Date: Sep 23, 2012 1:25 PM

Connection Type: Cellular

Server: Fort Worth, TX

Download: 7.99 Mbps

Upload: 7.50 Mbps

Ping: 177 ms

 

External IP: 66.87.97.145 (spcsdns.net)

Latitude: 32.9808

Longitude: -97.1716

 

 

Decent speeds you have there!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...