Jump to content

Network Vision/LTE - Memphis Market


dmaxx67

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
  • 8 months later...

Disregard last message. Downloaded signalcheck and im getting 800. I jyst dont thibk they have been tuned yet. Im only seeing around -95 at house and work in building

 

Sent from my Optimus G using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 2 months later...
  • 3 weeks later...

Hello! I tried Sprint out last year and recently tried it out again. There's B26 all over the Germantown area, by the river, Mud Island, from Memphis to Brownsville TN and Jackson TN. Coverage has greatly increased compared to last year. It was good enough that I decided to port my main and secondary lines over to Sprint. We didn't get 4G around Gallaway TN or most of 70/79 from Memphis to Jackson, but we usually don't drive that route anyway. I40 from Memphis to Jackson has 4g about 90% of the way now. To my surprise, the 4G is solid in Brownsville TN with B25 and B26 both being pretty strong. Millington is somewhat spotty, but usable.

 

BTW, I have not seen B41 anywhere yet.

 

Hope this helps!

:-)

Edited by hectorartm
  • Like 2
Link to comment
Share on other sites

  • 2 months later...
  • 3 weeks later...

I've been mulling over buying a Sprint iPhone 6 to get unlimited data (I'm using Gophone atm on an iPhone 5).  One of my biggest concerns was their lack of low frequency bands for building penetration.  Looking over the Site Acceptance Reports I see Memphis is listed as have something like 240 B26 800Mhz LTE and 270 CDMA 800Mhz.  What exactly does "Site Acceptance" mean; something they've already upgraded or just plan to in the future?  I'm currently in Olive Branch right at the edge of Memphis on HWY 78 (about 2 miles south of the Nike plant on Tuggle).  

 

I'm really wanting unlimited data and my only options are Sprint and T-mobile.  T-mobile coverage has waaay to much 2g or just plain nothing coverage around here for me to use.  Plus BNSF has a 20% discount with Sprint.  Sprint seems like it's taken a beating over the years but they appear to be making a strong effort to get back in the game.  I'm not one of those speed test junkies that require 50mb downloads; 5mb or higher is fine for what I want to do.  

 

Happy new year fellow Memphians!

Link to comment
Share on other sites

With those types of expectations, it sounds like your be very happy with Sprint in the Memphis market. They have a lot of B26 (800) LTE coverage. They are lacking a lot of B41, which brings the speed. That will come in time, though.

 

Using Nexus 5 on Tapatalk

Link to comment
Share on other sites

  • 4 months later...

Here my direct comparison to tmo (just switched a few lines back to Sprint). T-Mobile is simply faster and seems to have better indoor coverage. I'm attributing this to cell density. Anyway, Sprint is still a bit too slow in some areas, but I saw B41 all over the wolfchase mall area, on the 40 going towards to 240 and down from the mall to Shelby Park Dog Park area. So there's definitely some upgrades being done. Germantown by Hacks and Poplar Pike now has B26 and is fully covered. Everything by the golf course and Fieldstone apartments still stinks bad. Driving to Collierville from Winchester/Hacks Cross is now fully covered with B26 (before only B25). So there's definitely activity in the last few months, but still they have a long way to go. The consistency is nowhere near tmo yet. I'm confident they will get there.

Link to comment
Share on other sites

  • 3 months later...

Sprint leases 700 MHz A-block spectrum from C-Spire in addition to PCS spectrum

 

http://wireless2.fcc.gov/UlsApp/ApplicationSearch/applAdminAttachments.jsp?applID=9191702#

 

That is all of C Spire's licensed spectrum in the Memphis market.  Additionally, the leases are long term, de facto transfer, signaling that this likely precedes an actual transfer of licenses.  In layman's terms, C Spire almost certainly is exiting the Memphis market.  Much like USCC in St. Louis, that urban coverage expansion has not worked out, apparently.

 

AJ

  • Like 1
Link to comment
Share on other sites

This deal looks good for both parties :  The instant transaction involves Sprint leasing from CSL certain 700 MHz and 1.9 GHz

spectrum in six counties in Tennessee and five counties in Arkansas

 

The nine counties are: Crittenden, Cross, Lee, Phillips and St. Francis, AR and Fayette,
Haywood, Shelby and Tipton, TN. In Crittenden, AR and Fayette, Sheldy and Tipton, TN
Sprint’s total attributable spectrum already exceeded the spectrum screen threshold.

 

The instant transaction also involves CSL leasing or subleasing from Sprint certain 800 MHz, 1.9 GHz and 2.5 GHz spectrum in four counties in Florida and five counties in Mississippi.

Link to comment
Share on other sites

Sprint's spectrum already exceeding the threshold. Is this the new "include all spectrum like it's the same" dumb threshold?

 

Also, heck yes Sprint should go for 700 A deployment in Memphis. Aggregate B12 and B26. That would be excellent.

 

I'm shocked Sprint went for B12 there but they should be going for it in remaining markets now that it's supported on Sprint devices.

Link to comment
Share on other sites

Sprint's spectrum already exceeding the threshold. Is this the new "include all spectrum like it's the same" dumb threshold?

 

Also, heck yes Sprint should go for 700 A deployment in Memphis. Aggregate B12 and B26. That would be excellent.

 

I'm shocked Sprint went for B12 there but they should be going for it in remaining markets now that it's supported on Sprint devices.

You cannot aggregate sub 1 ghz spectrum. Furthermore 700a is blocked by a local station.

 

Sent from my Nexus 5

Link to comment
Share on other sites

Furthermore 700a is blocked by a local station.

 

Sent from my Nexus 5

 

That doesn't really matter here, I don't think.  It's a one time expense of maybe $1 million and there are plenty of other open channels WPXX could be moved to.

 

- Trip

Link to comment
Share on other sites

  • 2 years later...

Something odd with my Pixel 2 XL yesterday: in Itawamba County (on the border with AL east of Tupelo) my phone would connect to CSpire's LTE network but I couldn't get any data session to work ('x' on the signal strength indicator) - although I had no trouble roaming on AT&T LTE in NW Alabama earlier. But perhaps more interesting is that at least some of the towers were broadcasting on Band 25, which is the first evidence I've seen of a RRPP partner deploying on Sprint's spectrum. I also saw some Band 12 (presumably the 700 A block spectrum CSpire bought).

I haven't seen any evidence of Sprint deployment on Band 12 in Memphis so far but I'll keep an eye out.

  • Like 1
Link to comment
Share on other sites

On 11/18/2017 at 4:33 PM, lordsutch said:

Something odd with my Pixel 2 XL yesterday: in Itawamba County (on the border with AL east of Tupelo) my phone would connect to CSpire's LTE network but I couldn't get any data session to work ('x' on the signal strength indicator) - although I had no trouble roaming on AT&T LTE in NW Alabama earlier. But perhaps more interesting is that at least some of the towers were broadcasting on Band 25, which is the first evidence I've seen of a RRPP partner deploying on Sprint's spectrum. I also saw some Band 12 (presumably the 700 A block spectrum CSpire bought).

I haven't seen any evidence of Sprint deployment on Band 12 in Memphis so far but I'll keep an eye out.

Are you sure it was the G block and not just At&t using MFBI on their PCS band? Because I've gotten LTE roaming to show up as B25 from At&T's F+C block

Link to comment
Share on other sites

Are you sure it was the G block and not just At&t using MFBI on their PCS band? Because I've gotten LTE roaming to show up as B25 from At&T's F+C block
Att does MFBI b25 and 26.

Sent from my Pixel using Tapatalk

Link to comment
Share on other sites

Att does MFBI b25 and 26.

Sent from my Pixel using Tapatalk

Now I've had a chance to look through the log, it was definitely not AT&T; it was CSpire (311-230) MFBI (band 2/25), EARFCN 8440 (1970 MHz downlink). There was also quite a bit of band 12, EARFCN 5145; while the phone would register on the network I never got a successful data session and actually had to reboot to get it to connect again to LTE when I got into Sprint coverage.
Link to comment
Share on other sites

On 11/18/2017 at 4:33 PM, lordsutch said:

Something odd with my Pixel 2 XL yesterday: in Itawamba County (on the border with AL east of Tupelo) my phone would connect to CSpire's LTE network but I couldn't get any data session to work ('x' on the signal strength indicator) - although I had no trouble roaming on AT&T LTE in NW Alabama earlier. But perhaps more interesting is that at least some of the towers were broadcasting on Band 25, which is the first evidence I've seen of a RRPP partner deploying on Sprint's spectrum. I also saw some Band 12 (presumably the 700 A block spectrum CSpire bought).

I haven't seen any evidence of Sprint deployment on Band 12 in Memphis so far but I'll keep an eye out.

NexTech Wireless in Kansas and Colorado has deployed Band 25 LTE in the G block all along I-70 from Goodland, KS to just east of Denver. This happened back in May and June. 

Link to comment
Share on other sites

I had no more luck on the way back; my Pixel 2 XL wouldn't even connect to 1X or 3G on CSpire. My Nexus 6 on Project Fi wouldn't connect either when I forced it to connect via CDMA/LTE using the *#*#FISPR#*#* dialer code.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...