Jump to content

Should Sprint iPhone get same reception as other Sprint phones?


Parev

Recommended Posts

Hi

 

I've found the forum very useful, especially because I'm a newbie when it comes to cellular.

 

I don't have my own cell phone. I have a company provided Blackberry 9330 on Sprint. I get very good signal at my work, at home, and at other places I frequent.

 

As I read the forums, I'm learning that there is some variation between frequencies and other cell technologies. This concerns me because I'm looking at getting the new iPhone when it comes out, and I was considering Sprint since my Sprint Blackberry has worked great for me.

 

Should I anticipate that the Sprint iPhone would also have good signal for me or do I really need to test this some other way before I take the plunge and buy?

 

Any help would be appreciated!

Link to comment
Share on other sites

I used to have Blackberry tour and the signal was too good in my work place, then upgraded to iPhone 4s the signal dropped and internet suck too. then I decided to buy Samsung s3. I don't have the issue any more. I highly recommended to get LTE phone !!

Link to comment
Share on other sites

Currently, I have the iPhone 4S for my personal phone and BB 9930 for my work phone (both on Sprint). My iPhone seems to always have better signal than my Blackberry. Heck, my old Bold 9650 was horrible with dropping calls. Seems like these newer Blackberries don't seem to have great call quality/signal. :wacko:

Link to comment
Share on other sites

I have gotten to the point where I would like some help with a question. Is the antenna in the 4s superior in performance to the new LTE devices such as the S3 and EVO LTE? My wife has a 4s and i have both an S3 and EVO LTE and she is able to use her phone in buildings around town where I can't and she consistently gets better reception. My house sits about 900 feet from a NV tower (3g and 4g work done but LTE currently blocked) and on my wife's phone she always has full signal (I don't know of a way to get the actual dcBm reading on her phone) while my S3 and EVO LTE hover between -98 and -84 dBm (mostly -98). While on vacation in PA she was always able to roam with decent reception (2-3 bars) where I would get 0-1. I really prefer Android to iOS but am getting to the point where I am going to buy an iPhone so that I can use my phone in places that she is able to. Anyone (WiWavelength, digiblur, robert etc) able to shed some light on this? Thanks for any info anyone can provide.

Link to comment
Share on other sites

The iPhone 4/4S has external antennas (the silver bands around the edges of the device). While these antennas have been problematic, as they can easily be shorted by contact with human skin, they likely do provide a link budget (i.e. transmission/reception) advantage. And knowing how overly litigious Apple can be, it probably would sue the pants off of any other OEM that built a smartphone with external antennas.

 

AJ

Link to comment
Share on other sites

The iPhone 4/4S has external antennas (the silver bands around the edges of the device). While these antennas have been problematic, as they can easily be shorted by contact with human skin, they likely do provide a link budget (i.e. transmission/reception) advantage. And knowing how overly litigious Apple can be, it probably would sue the pants off of any other OEM that built a smartphone with external antennas.

 

AJ

That makes sense and I should have put 2 and 2 together as I am aware of the external antenna. Face palm. Thanks for the input.

 

Sent from my SPH-L710 using Tapatalk 2

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...