Jump to content

Network Vision/LTE - New York City Market


Ace41690

Recommended Posts

Can LTE 800 be remotely activated? Or will we have to sit through another LTE 1900-like rollout?

It cannot be remotely activated. It involves a site visit. But the site visit is pretty simple. Just installing a Band 26 carrier card and integrating with the network. So it will go much faster.

 

The biggest hindrance to Band 26 deployment is getting cards from OEM's (which has been slow going) and getting SMR rebanders out of the way.

 

Robert via Samsung Note 8.0 using Tapatalk Pro

 

 

  • Like 1
Link to comment
Share on other sites

^ Nice. Any Sprint LTE over there?

Nah. 3G was really good though. They mentioned that the European and North American internet backbone meet in their building so multiple floors of the building are filled with server rooms from different companies and when their leases run out, Google buys the floor and turns it into offices.

  • Like 2
Link to comment
Share on other sites

Has Sprint improved their service here? I keep hearing people on other forums speak with "authority" that Sprint sucks and they're using NYC to draw their conclusions. What's really going on here?

  • Like 1
Link to comment
Share on other sites

Has Sprint improved their service here? I keep hearing people on other forums speak with "authority" that Sprint sucks and they're using NYC to draw their conclusions. What's really going on here?

In the Bronx LTE is solid

 

I'll break up Manhattan into 3 parts 

Uptown is solid

Midtown is good

Downtown is hit or miss(After Sandy work has slowed down to a CRAWL)

 

BK seems to be solid 

 

Queens is good (a lot of sites still need upgrading)

 

My voice coverage and quality has improved Dramatically after 1x800 and HD Voice.

(After many many months of constant dropped calls!)

 

I was able to Force band 41 on my Nexus 5 and test it out, and it was EPIC! (speeds ranging from 20-50mb/sec)

 

So to answer your question, has Sprint improved?

Going from 50k/sec to about 5mb/sec average,

going from good voice coverage to one of the best in NYC,

I would have to say: Absolutely!

 

Are there sore spots? YES, there are places still not quite 100% covered

Indoors is OK (B26 will make this a thing of the past) but not great

B25 speeds have leveled out from about 15mb/sec avg to about 5mb/sec (still perfectly usable in most cases)

 

My phone does not officially support B41, but I can tell you, from what I've seen, it will be EPIC in dense areas like NYC and Chicago.

 

So the future is bright, once B26 and B41(there are MANY B41 sites already) are fully deployed, Sprint will have one of the most powerful networks hands down.

  • Like 6
Link to comment
Share on other sites

In the Bronx LTE is solid

 

I'll break up Manhattan into 3 parts 

Uptown is solid

Midtown is good

Downtown is hit or miss(After Sandy work has slowed down to a CRAWL)

 

BK seems to be solid 

 

Queens is good (a lot of sites still need upgrading)

You forgot the New Jersey suburb of Staten Island  :)  But I concur with your post.

 

Queens does need to step it up a notch though. And it's usually in the areas around Queens Blvd between Elmhurst Hospital thru Kew Gardens. 

  • Like 2
Link to comment
Share on other sites

You forgot the New Jersey suburb of Staten Island  :)  But I concur with your post.

 

Queens does need to step it up a notch though. And it's usually in the areas around Queens Blvd between Elmhurst Hospital thru Kew Gardens. 

I rarely ever venture out to SI and LI so maybe someone can chime in on those places.

Link to comment
Share on other sites

I rarely ever venture out to SI and LI so maybe someone can chime in on those places.

LI is good.

A lot of spotty coverage though. There is a lot of gaps that need to be filled, but when I'm traveling on the LIRR going from Nassau County to Suffolk. I usually have LTE for a majority of the train ride. 3G on regular is pretty good. Even in my town lol.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

LI is good.

A lot of spotty coverage though. There is a lot of gaps that need to be filled, but when I'm traveling on the LIRR going from Nassau County to Suffolk. I usually have LTE for a majority of the train ride. 3G on regular is pretty good. Even in my town lol.

 

 

Sent from my iPhone using Tapatalk

I see little/no LTE between Queens and Suffolk on the LIRR, maybe my phone switches towers too fast.

 

Manhattan - LTE about 60% of the time.

Brooklyn - LTE about 60% of the time.

Queens - LTE about 35-40% of the time.

Long Island - LTE about 20-25% of the time.

  • Like 1
Link to comment
Share on other sites

Nah. 3G was really good though. They mentioned that the European and North American internet backbone meet in their building so multiple floors of the building are filled with server rooms from different companies and when their leases run out, Google buys the floor and turns it into offices.

 

I've been there as well, such an awesome place!

  • Like 1
Link to comment
Share on other sites

I see little/no LTE between Queens and Suffolk on the LIRR, maybe my phone switches towers too fast.

 

Manhattan - LTE about 60% of the time.

Brooklyn - LTE about 60% of the time.

Queens - LTE about 35-40% of the time.

Long Island - LTE about 20-25% of the time.

I own a Nexus 5, so add another 20% for the awesome signal strength..haha

  • Like 1
Link to comment
Share on other sites

My biggest gripe with Queens is the cell density. Coverage is reasonable when out and about, but inbuilding is painful.

What i find odd is that its mainly the opposite with me. This is what I got this morning on the 8th floor of my building on Parsons Blvd and the Grand Central. Yet downstairs outside, it never goes higher than 13 down, 6.8 up (and that's on a good day), usually its only between 4-7. 

 

TS

  • Like 3
Link to comment
Share on other sites

What i find odd is that its mainly the opposite with me. This is what I got this morning on the 8th floor of my building on Parsons Blvd and the Grand Central. Yet downstairs outside, it never goes higher than 13 down, 6.8 up (and that's on a good day), usually its only between 4-7. 

 

TS

 

Interestingly enough, the same happens with me. Today I was on my front step with a -105dbm signal and was pulling 7.80 Mbps down. But when I went down the road and had a -98dbm signal from the same tower, I was only pulling 2Mbps down.

 

And this happens all the time. It's some weird phenomenon and it makes me wonder if it has something to do with too much noise or something like that. Isn't that what happened with the whole Chicago debacle when their speeds plummeted?

  • Like 1
Link to comment
Share on other sites

Isn't that what happened with the whole Chicago debacle when their speeds plummeted?

Everything seems to point to Chicago running into capacity issues, as all the carriers experienced a massive decline in their performance over the course of the last year or so. Hopefully that extra 5x5 carrier will help alleviate folks with older LTE devices.

  • Like 1
Link to comment
Share on other sites

Interestingly enough, the same happens with me. Today I was on my front step with a -105dbm signal and was pulling 7.80 Mbps down. But when I went down the road and had a -98dbm signal from the same tower, I was only pulling 2Mbps down.

 

You cannot directly correlate RSRP and data speeds.  The network capacity balancing act is far more complex than that.

 

AJ

  • Like 2
Link to comment
Share on other sites

What i find odd is that its mainly the opposite with me. This is what I got this morning on the 8th floor of my building on Parsons Blvd and the Grand Central. Yet downstairs outside, it never goes higher than 13 down, 6.8 up (and that's on a good day), usually its only between 4-7. 

 

TS

 

I'm a little further down, in Sunnyside (most of the time), and that's where I find an issue inbuilding.

Link to comment
Share on other sites

Long time lurker. I luckily live in a fantastic LTE (even Wimax) area in East Harlem. Have perfect band 41 and can pull 50+Mbps.

 

Problem started once they flipped band 25 on a few weeks ago and I can't seem to hang onto the band 41 connection. At best I can stay connect for a few minutes before it falls back to band 25. I've tried every different priority mode in LTE engineering settings but to no avail. Is this likely a phone software problem or a tower issue? Any thoughts?

Link to comment
Share on other sites

Long time lurker. I luckily live in a fantastic LTE (even Wimax) area in East Harlem. Have perfect band 41 and can pull 50+Mbps.

 

Problem started once they flipped band 25 on a few weeks ago and I can't seem to hang onto the band 41 connection. At best I can stay connect for a few minutes before it falls back to band 25. I've tried every different priority mode in LTE engineering settings but to no avail. Is this likely a phone software problem or a tower issue? Any thoughts?

I'm in Harlem too and I'm having similar issues like the one you are describing... I'm able to get band 41 after doing a profile update, but for the most part I get band 25.

 

Sent from my LG-LS980 using Tapatalk

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Similar Content

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...