Jump to content

What is eHRPD?


Recommended Posts

eHRPD improves pings in most instances, because the LTE core is faster to process data packets than the MSC, and also the routing to the internet backbone is improved.

 

Robert

 

This is where I get confused, and you've probably answered this before. If it's done through an LTE Core, then does that mean that there are LTE panels? If not, how does it process data through a core that is not there? Or is it all down through just software, on the same old CDMA panels?

 

 

-Luis

 

 

Never mind I just answered my own question lol :P

Edited by Mondays In Flames
Link to comment
Share on other sites

This is where I get confused, and you've probably answered this before. If it's done through an LTE Core, then does that mean that there are LTE panels? If not, how does it process data through a core that is not there? Or is it all down through just software, on the same old CDMA panels?

 

 

-Luis

 

 

Never mind I just answered my own question lol :P

 

Just so everyone else is clear, the 4G core is not at the site. Sprint has over two dozen 4G cores around the country. Each site is connected to the 4G cores via backhaul. At the 4G core the data is processed and goes off the Sprint network out into the internet backbone to go wherever in the world your data packets are destined to go to .

 

Robert

Link to comment
Share on other sites

Your guess is good as mine. But my guess is testing. I think they turned it on in several markets last week to see how it was working. Then turned it off when they concluded the testing. But I do not know for certain,

 

Robert

 

Thats what I've experienced the last 2 mornings in Charlotte. eHRPD early in the morning till around lunch and then back to EVDO.

Link to comment
Share on other sites

 

eHRPD improves pings in most instances, because the LTE core is faster to process data packets than the MSC, and also the routing to the internet backbone is improved.

 

Robert

 

eHRPD has resulted in some excellent speeds and ping times. ;)

 

4ynynu6a.jpg

 

From the tower that has been literally broken for almost 2 yrs straight. I miss the Alltel Evdo they had us on.

 

I still think it is bigzeto over there across the street from me with Linux distro torrents running on 3 or 4 hotspot devices.

 

Sent from my C64 w/Epyx FastLoad cartridge

  • Like 1
Link to comment
Share on other sites

I read 3GS and it had me thinking iPhone 3GS. I had to rack my brain for 30 seconds to figure out what you meant. I've never seen the Galaxy S3 shortened that way, only GS3

You are right.. Galaxy S3... I put the 3 first by accident... Love this phone!!!!

Link to comment
Share on other sites

So I will ask the question and likely get slapped down but I'll ask anyway. Typically after seeing eHRPD when do you see LTE? I know there is not a solid answer but just from what has been reported on the site?

Link to comment
Share on other sites

So I will ask the question and likely get slapped down but I'll ask anyway. Typically after seeing eHRPD when do you see LTE? I know there is not a solid answer but just from what has been reported on the site?

 

I wish that I had a "slap-down" emoticon!

 

There is no correlation at all. There are some markets that have eHRPD in part of them (like the Georgia market) and they will not get LTE until next year. Some had LTE go live a few days before eHRPD. There is just no way to take an eHRPD live date and guess when LTE will show up. Sorry. :cry:

 

Robert

Link to comment
Share on other sites

Another tear from Tampa.. I'm not sure how you do it Robert and you know your market is going to be next year it must be killing you..

 

Sent from my EVO using Tapatalk 2

 

he gets steady 2mbps 3G across his general travels and has a Sprint tower in his side yard, so I think his experience will be much better than us city folk trudging along at <100kbps... ;)

Link to comment
Share on other sites

he gets steady 2mbps 3G across his general travels and has a Sprint tower in his side yard, so I think his experience will be much better than us city folk trudging along at <50kbps... ;)

 

Fixed (at least in many cases, including my own usually) B)

Link to comment
Share on other sites

 

he gets steady 2mbps 3G across his general travels and has a Sprint tower in his side yard' date=' so I think his experience will be much better than us city folk trudging along at <100kbps... ;)[/quote']

 

I wouldn't quite characterize it that way. In my rural town, we tend to have 1Mbps speeds. However, most of Santa Fe and ABQ is under 500kbps. I just know where the 2Mbps sites are.

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

  • Like 2
Link to comment
Share on other sites

eHRPD has resulted in some excellent speeds and ping times. ;)

 

4ynynu6a.jpg

 

From the tower that has been literally broken for almost 2 yrs straight. I miss the Alltel Evdo they had us on.

 

I still think it is bigzeto over there across the street from me with Linux distro torrents running on 3 or 4 hotspot devices.

 

Sent from my C64 w/Epyx FastLoad cartridge

 

Haha, very funny. I rarely use data anymore while at work as it's just too painful. I'm a Cardinals fan though, so I'm going to activate one of my Wimax devices tomorrow so I can listen to the game while working at my desk. Thanks protection site! B)

Link to comment
Share on other sites

I'm a Cardinals fan though...

 

I thought that your *professional* team was the LSU Tigers.

 

;)

 

AJ

Link to comment
Share on other sites

Thats what I've experienced the last 2 mornings in Charlotte. eHRPD early in the morning till around lunch and then back to EVDO.

 

I am getting eHRPD in downtown Charlotte right now

  • Like 2
Link to comment
Share on other sites

I've still have it now as well. I couldnt pick it up at all on the way home yesterday afternoon, airplane cycled it and all. Last night around 10 I just happened to look at it and it showed eHRPD and I was connected to my WIFI. I didnt think it would show that on WIFI ???

Link to comment
Share on other sites

  • 2 weeks later...

Does seeing eHRPD mean that the backhaul has been completed at a site or will it use the existing backhaul to get to the 4G core as it does to get to the MSC until backhaul is upgraded

 

Sent from my EVO using Tapatalk 2

 

 

Link to comment
Share on other sites

Does seeing eHRPD mean that the backhaul has been completed at a site or will it use the existing backhaul to get to the 4G core as it does to get to the MSC until backhaul is upgraded

 

Sent from my EVO using Tapatalk 2

 

No. The backhaul is for the NV equipment. There's no point in hooking up the legacy equipment to the new backhaul when they are just going to take it down in a few months. Like I've said before, that would be like stopping at the mechanic shop to get a tune-up on the way to the junk yard. The tower crews have enough to do already.

Link to comment
Share on other sites

Does seeing eHRPD mean that the backhaul has been completed at a site or will it use the existing backhaul to get to the 4G core as it does to get to the MSC until backhaul is upgraded

 

Sent from my EVO using Tapatalk 2

 

Just means the traffic is being routed to the 4G core. Could be new backhaul or legacy backhaul

Link to comment
Share on other sites

There have been a few instances where eHRPD has caused me to lose data connectivity. I had to actually go into the ##DATA# menu and disable eHRPD and restart the phone to get any data. For some reason, the signal will be full, then none, then full, then none while it is trying to connect to data. Once I turn off eHRPD and restart, it comes up and immediately connects to EvDo Rev. A fine.

 

That happened just last night while driving up to Suffolk, VA where I'm currently at.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...