Jump to content

"Lightsquared gets additional rope"


xcharles718

Recommended Posts

I guess they're still working on attempting that DoD spectrum swap.

 

From Daily Wireless

http://www.dailywire...dditional-rope/

 

...LightSquared has reportedly reached a $190 million agreement with its creditors that will let it continue operations until September 2013, Bloomberg reports. At stake was the company’s ability to draw upon $190 million of encumbered cash at LightSquared LP, the main operating subsidiary of the company.

 

LightSquared filed for Chapter 11 bankruptcy in May after LightSquared’s founder, Harbinger Capital Partners CEO Philip Falcone, failed to strike a deal with lenders — holding more than $1 billion in company debt — to keep the company afloat.

 

 

The deal will allow the company to use as much as $190 million in collateral until the fall of next year while repaying creditors $6.25 million a month.

Meanwhile, a group of lawmakers pressed the FCC to review using Department of Defense spectrum for LightSquared.

“A spectrum swap is the most resourceful and efficient way to quickly expand broadband access nationwide,” the letter said. The letter was sent by Reps. Jim Moran (D-Va.), Maurice Hinchey (D-N.Y.), Steve Rothman (D-N.J.) Rodney Alexander (R-La.) and Ander Crenshaw (R-Fla.), all members of the House Appropriations Committee...

Link to comment
Share on other sites

I hope they do not get it. I'd rather it go to someone like tmobile/sprint/ other RCA members over light squared.

 

FCC could give sprint the 700 and sprint give up the 800mhz.

 

Or tmobile buys 10mhz of the spectrum, and promises to build out the full 20mhz all over it's network.

 

Either way, we would have 3 national carriers using 700mhz, and if FCC forces interpolabolity. We could have smaller regional guys have the ability to roam on any of the three.

 

That sounds like a better plan than rewarding light squared on a failed gamble.

Link to comment
Share on other sites

I hope they do not get it. I'd rather it go to someone like tmobile/sprint/ other RCA members over light squared.

 

FCC could give sprint the 700 and sprint give up the 800mhz.

 

Or tmobile buys 10mhz of the spectrum, and promises to build out the full 20mhz all over it's network.

 

Either way, we would have 3 national carriers using 700mhz, and if FCC forces interpolabolity. We could have smaller regional guys have the ability to roam on any of the three.

 

That sounds like a better plan than rewarding light squared on a failed gamble.

 

Where would they get this 700MHz spectrum that you're talking about? All of the 700MHz spectrum has been spoken for with public safety taking a big chunk.

Link to comment
Share on other sites

Unless I am mistaken, isn't the spectrum light squared is trying to swap for is the public safety 700mhz.

 

 

Also AT&T only has 20mhz in like 1/3 of the country. Another 1/3 has 10mhz and the last 1/3 has no 700mhz. I believe Chicago is a 10mhz market.

Link to comment
Share on other sites

Unless I am mistaken' date=' isn't the spectrum light squared is trying to swap for is the public safety 700mhz.

 

Also AT&T only has 20mhz in like 1/3 of the country. Another 1/3 has 10mhz and the last 1/3 has no 700mhz. I believe Chicago is a 10mhz market.[/quote']

 

Lightsquared is trying to swap for Department of Defense spectrum. I believe that the lowest frequency they could hope for from the DOD is in the 900 mhz band, but realistically, they will probably get something comparable to what they had, just without the interference issues.

 

Sent from my CM9 Toro using Forum Runner

  • Like 1
Link to comment
Share on other sites

Unless I am mistaken, isn't the spectrum light squared is trying to swap for is the public safety 700mhz.

 

 

Also AT&T only has 20mhz in like 1/3 of the country. Another 1/3 has 10mhz and the last 1/3 has no 700mhz. I believe Chicago is a 10mhz market.

 

As if PS is going to just roll over and play dead!

Link to comment
Share on other sites

  • 1 year later...

So I was looking through the permits for CT and saw that lightsquared was approved to install 3 antennas on a cell tower in Avon CT at 376 deercliff rd.

Last year they had applied for quite a few of them inside the Vegas City limits.

 

 

Sent from Josh's iPhone 5 using Tapatalk 2

  • Like 1
Link to comment
Share on other sites

Last year they had applied for quite a few of them inside the Vegas City limits.

 

Las Vegas was a LightSquared test bed.

 

AJ

Link to comment
Share on other sites

 

 

Last year they had applied for quite a few of them inside the Vegas City limits.

 

 

Las Vegas was a LightSquared test bed.

 

AJ

I figured as such, but they let quite a few of their permits lapse without doing anything to them.

 

 

Sent from Josh's iPhone 5 using Tapatalk 2

Link to comment
Share on other sites

I figured as such, but they let quite a few of their permits lapse without doing anything to them.

 

But with the permits they did use, they wrecked GPS.  So, that has to count for something.

 

AJ

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...