Jump to content

ICS Debug Lock Code Mystery Resolved - Finally


S4GRU

Recommended Posts

OK...this is probably not a big deal to most of you. But ever since I upgraded my E4GT a few months ago to ICS, I haven't been able to access my DEBUG menu. Which for me is a big deal. I live in that screen!

 

The Debug Screen is where wireless nerds hang out to see what channel they are on, look at their Mac Index, check out their Ec/Io ratio, etc. However, when I upgraded to ICS on my E4GT, it asked for me to enter a lock code. I assumed this was the MSL Code, which all Samsung devices have required to access debug screens in the past...but alas, no.

 

For months I have been searching for a work around, perusing forums, scouring developer comments and I haven't found anything. That is, until today.

 

THE ICS DEBUG LOCK CODE IS: 777468

 

It works on both my Galaxy Nexus and Epic 4G Touch. I went to try it on my EVO LTE, but the debug menu there isn't locked with a code. It may work in other ICS ROMs and devices too. Sound off below if you find it works in other places.

 

Special thanks to BigRushDog on XDA who posted the solution.

 

And for those of you who do not know, to access your Debug screen, go to your phone dialer and enter ##DEBUG# in your keypad. In the GNex, you have to enter *#*#DEBUG#*#*

 

Robert via Kindle Fire using Forum Runner

  • Like 4
Link to comment
Share on other sites

Robert, will you post some screen caps of the ICS debug screen? I would be very interested to see the fields contained within, as every debug screen/engineering screen/field trial app presents signal diagnostics a bit differently.

 

AJ

Link to comment
Share on other sites

Robert, will you post some screen caps of the ICS debug screen? I would be very interested to see the fields contained within, as every debug screen/engineering screen/field trial app presents signal diagnostics a bit differently.

 

AJ

 

Here are a few screen caps - maybe you could walk us through what we should be looking at?

 

7357598866_3e804411bc_z.jpg

7172385469_b45915d850_z.jpg

7172386335_3c6c1759b4_z.jpg

7357602728_7d23d56bec_z.jpg

7357603100_a5fb124d07_z.jpg

7357603804_dc26e9401d_z.jpg

7172388373_109c8ae515_z.jpg

7172388743_7ac4597f72_z.jpg

 

 

Robert - thanks for finding this! I had all but given up.

 

here is the EVO 4G LTE in the exact same location where I took screenshot of GNEX

7172465479_5408bebec5.jpg

7172465503_976912dbc4.jpg

 

can we make any meaningful comparison between the two?

  • Like 1
Link to comment
Share on other sites

Your signal is amazing. You must be right next to a cell site!

 

I was going to ask if his phones were laying next to an airave. I am in a parking lot with a sprint tower and have a -60 signal.

 

Sent from my C64 w/Epyx FastLoad cartridge

Link to comment
Share on other sites

I was going to ask if his phones were laying next to an airave. I am in a parking lot with a sprint tower and have a -60 signal.

 

With a -44 dBm signal, that handset could be practically humping an Airave.

 

AJ

Link to comment
Share on other sites

The Galaxy Nexus engineering screens line up quite consistently with the EVO LTE engineering screens. That has not always been the case. So, both are likely utilizing the same signal diagnostics embedded into Android 4.0.

 

AJ

Link to comment
Share on other sites

With a -44 dBm signal, that handset could be practically humping an Airave.

 

AJ

 

no airave - just an advantage of living "downtown"

 

Was able to get the EVO down to -41 and the GNEX down to -43 for the 1x engineering menu.

 

7358947656_458d6f73c0.jpg

Link to comment
Share on other sites

Since the GNex has already been posted, I will post the E4GT with ICS for comparison:

 

gallery_1_1_9845.jpg

 

 

gallery_1_1_6540.jpg

 

 

gallery_1_1_7497.jpg

 

 

gallery_1_1_28790.jpg

  • Like 1
Link to comment
Share on other sites

 

no airave - just an advantage of living "downtown"

 

Was able to get the EVO down to -41 and the GNEX down to -43 for the 1x engineering menu.

 

7358947656_458d6f73c0.jpg

 

Wow... Does your body get warm when you stand by the window? That's some crazy signal. That panel must be right next to you. Are you sure you aren't a NV contractor climbing on the tower rack taking screen shots? :)

 

Sent from my C64 w/Epyx FastLoad cartridge

  • Like 1
Link to comment
Share on other sites

 

Wow... Does your body get warm when you stand by the window? That's some crazy signal. That panel must be right next to you. Are you sure you aren't a NV contractor climbing on the tower rack taking screen shots? :)

 

Sent from my C64 w/Epyx FastLoad cartridge

 

He must live on the top floor not far from the panels.

 

Sent from my LG Viper 4G LTE using Forum Runner

Link to comment
Share on other sites

He must live on the top floor not far from the panels.

 

Sent from my LG Viper 4G LTE using Forum Runner

 

Yup. I have a pretty good view. Location posted here:

 

http://s4gru.com/index.php?/topic/373-my-tower/page__view__findpost__p__10207

 

the panels that are flush with the building are Sprint and clearwire. The panels that are higher are Verizon (I think).

Link to comment
Share on other sites

Yup. I have a pretty good view. Location posted here:

 

http://s4gru.com/ind...dpost__p__10207

 

the panels that are flush with the building are Sprint and clearwire. The panels that are higher are Verizon (I think).

 

How much of a zoom lens do you have that you can get me a close up of the Clearwire panels? I have something similar to that in Lansing and want to make a comparison.

Link to comment
Share on other sites

  • 3 weeks later...

Anyone know how to map the channel numbers to actual frequencies?

Link to comment
Share on other sites

Anyone know how to map the channel numbers to actual frequencies?

 

What type of channel numbers? CDMA2000, WiMAX, or LTE? ARFCN conversion varies by band and airlink tech.

 

AJ

Link to comment
Share on other sites

CDMA2000 1900/800 and LTE 800. Playing around with a SDR and want to take a look at the signal.

Link to comment
Share on other sites

Going back to the "my signal is stronger than yours" argument...the signal is usually in the -40s. Crazy talk...but that's what happens when the cell site is a block and a half away.

 

ForumRunner_20120630_212734.png

 

I would get pictures, but I would need to climb up on a mountain or somethig to be able to see the roof of the four-story building where the site sits. Maybe tomorrow, since mountains aren't exactly in short supply around here :)

 

Sent from my Galaxy SIII-32GB using Forum Runner

Link to comment
Share on other sites

Having trouble with the difference between RX power (pilot stregenth?) and RSSI.

Link to comment
Share on other sites

  • 1 month later...
So in other words the lock code is "sprint" 777468 that is an easier way to remember it :)

 

Never noticed that. Thanks!

 

Robert via Samsung Galaxy S-III 32GB using Forum Runner

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Since this is kind of the general chat thread, I have to share this humorous story (at least it is to me): Since around February/March of this year, my S22U has been an absolute pain to charge. USB-C cables would immediately fall out and it progressively got worse and worse until it often took me a number of minutes to get the angle of the cable juuuussst right to get charging to occur at all (not exaggerating). The connection was so weak that even walking heavily could cause the cable to disconnect. I tried cleaning out the port with a stable, a paperclip, etc. Some dust/lint/dirt came out but the connection didn't improve one bit. Needless to say, this was a MONSTER headache and had me hating this phone. I just didn't have the finances right now for a replacement.  Which brings us to the night before last. I am angry as hell because I had spent five minutes trying to get this phone to charge and failed. I am looking in the port and I notice it doesn't look right. The walls look rough and, using a staple, the back and walls feel REALLY rough and very hard. I get some lint/dust out with the staple and it improves charging in the sense I can get it to charge but it doesn't remove any of the hard stuff. It's late and it's charging, so that's enough for now. I decide it's time to see if that hard stuff is part of the connector or not. More aggressive methods are needed! I work in a biochem lab and we have a lot of different sizes of disposable needles available. So, yesterday morning, while in the lab I grab a few different sizes of needles between 26AWG and 31 AWG. When I got home, I got to work and start probing the connector with the 26 AWG and 31 AWG needle. The stuff feels extremely hard, almost like it was part of the connector, but a bit does break off. Under examination of the bit, it's almost sandy with dust/lint embedded in it. It's not part of the connector but instead some sort of rock-hard crap! That's when I remember that I had done some rock hounding at the end of last year and in January. This involved lots of digging in very sandy/dusty soils; soils which bare more than a passing resemblance to the crap in the connector. We have our answer, this debris is basically compacted/cemented rock dust. Over time, moisture in the area combined with the compression from inserting the USB-C connector had turned it into cement. I start going nuts chiseling away at it with the 26 AWG needle. After about 5-10 minutes of constant chiseling and scraping with the 26AWG and 31AWG needles, I see the first signs of metal at the back of the connector. So it is metal around the outsides! Another 5 minutes of work and I have scraped away pretty much all of the crap in the connector. A few finishing passes with the 31AWG needle, a blast of compressed air, and it is time to see if this helped any. I plug my regular USB-C cable and holy crap it clicks into place; it hasn't done that since February! I pick up the phone and the cable has actually latched! The connector works pretty much like it did over a year ago, it's almost like having a brand new phone!
    • That's odd, they are usually almost lock step with TMO. I forgot to mention this also includes the September Security Update.
    • 417.55 MB September security update just downloaded here for S24+ unlocked   Edit:  after Sept security update install, checked and found a 13MB GP System update as well.  Still showing August 1st there however. 
    • T-Mobile is selling the rest of the 3.45GHz spectrum to Columbia Capital.  
    • Still nothing for my AT&T and Visible phones.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...