Jump to content

Network Vision/LTE - East Michigan Market (Detroit/Flint/Ann Arbor/Tri-Cities)


ReyBanz

Recommended Posts

9 hours ago, rocketr said:

DE54XC788 Got LTE800 at the beginning of December finally. It seems to be broadcasting at a lower power level but I think might be normal for IBEZ 3x3 sites 

How close are you to the nearest Canadian shore?  With 25km requires lower power iirc.  LTE 800 typically opens up like an umbrella - very short distance/small coverage area first, with full extend not reached for several months. B26 3x3 and 5x5 both work this way.  Typically 1x800 is done first, so you could check the distance for it to see the maximum boundary if limited for some reason.  Of course 1x800 normally far exceeds LTE 800.

Link to comment
Share on other sites

On 12/30/2018 at 8:11 PM, dkyeager said:

How close are you to the nearest Canadian shore?  With 25km requires lower power iirc.  LTE 800 typically opens up like an umbrella - very short distance/small coverage area first, with full extend not reached for several months. B26 3x3 and 5x5 both work this way.  Typically 1x800 is done first, so you could check the distance for it to see the maximum boundary if limited for some reason.  Of course 1x800 normally far exceeds LTE 800.

Not close to the shore... Based on what you said I'm thinking they will up the power more after some tuning.  

  • Like 1
Link to comment
Share on other sites

  • 5 weeks later...
  • 11 months later...
Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • large.unreadcontent.png.6ef00db54e758d06

  • gallery_1_23_9202.png

  • Posts

    • Fury Gran Coupe (My First Car - What a Boat...)
    • Definite usage quirks in hunting down these sites with a rainbow sim in a s24 ultra. Fell into a hole yesterday so sent off to T-Mobile purgatory. Try my various techniques. No Dish. Get within binocular range of former Sprint colocation and can see Dish equipment. Try to manually set network and everybody but no Dish is listed.  Airplane mode, restart, turn on and off sim, still no Dish. Pull upto 200ft from site straight on with antenna.  Still no Dish. Get to manual network hunting again on phone, power off phone for two minutes. Finally see Dish in manual network selection and choose it. Great signal as expected. I still think the 15 minute rule might work but lack patience. (With Sprint years ago, while roaming on AT&T, the phone would check for Sprint about every fifteen minutes. So at highway speed you could get to about the third Sprint site before roaming would end). Using both cellmapper and signalcheck.net maps to hunt down these sites. Cellmapper response is almost immediate these days (was taking weeks many months ago).  Their idea of where a site can be is often many miles apart. Of course not the same dataset. Also different ideas as how to label a site, but sector details can match with enough data (mimo makes this hard with its many sectors). Dish was using county spacing in a flat suburban area, but is now denser in a hilly richer suburban area.  Likely density of customers makes no difference as a poorer urban area with likely more Dish customers still has country spacing of sites.
    • Mike if you need more Dish data, I have been hunting down sites in western Columbus.  So far just n70 and n71 reporting although I CA all three.
    • Good catch! I meant 115932/119932. Edited my original post I've noticed the same thing lately and have just assumed that they're skipping it now because they're finally able to deploy mmWave small cells.
  • Recently Browsing

    • No registered users viewing this page.
×
×
  • Create New...