Jump to content

Destroyallcubes

S4GRU Premier Sponsor
  • Posts

    2,161
  • Joined

  • Last visited

Everything posted by Destroyallcubes

  1. Nope, SA is simply a push of software update pretty much. It can be turned on at any momemt, but they have no need too. It will provide near 0 improvement, and will be a bigger strain on battery. Honestly wouldn't be surprised if they wait until more spectrum is switched over to 5G and SoC maturation to lessen battery life hits before they enable SA everywhere. The best thing AT&T can do is keep Tmobile from buying any more 2.5Ghz spectrum and get it themselves, alongside any more mid band, and deploy it along side their C band tower climbs. If ATT can even win 20mhz of 2.5Ghz it would be great to deploy along side C band in the 2023/2024 climbs
  2. Thats the thing, even the A32 5Gaready has it enabled, even the S21/Z 3 series has it enabled, yet they make it seem like its only the S22 and on that will support it. Youd think theyd want more devices connecting to N77 to offload LTE some
  3. So am I missing something with why All N77 capable phones arent able to use the new "Andromeda" spectrum? As far As what I could tell is the new ATT spectrum should be available to use as N77, but ATT seems to ensue that N77 phones wont work with it. Is there a specific band thats used for it?
  4. My 3G shut off middle of the day last week. Still no 10mhz N5. They just havent refarmed the 3G spectrum. Figured they would have shut off the 3G network, and very quickly turned on that spectrum for use with 5G. In areas where B2 was used as 3G, it should have been transitioned quickly to 5G, but hasnt here at least. Im wondering if they will be waiting in some areas until tower climbs happen later this year with the N77 additions.
  5. Normally I’d think it’s because of that but it’s a single sector, and you will connect to other sites in the same area with full 10x10. It’s odd for sure. And only one 2 sites locally with 10x10 on adjacent sites that will also cover the area
  6. Does your area have N5 live? I have noticed that some sites have 1/3 sectors with a 5x5mhz b30 , but the other 2 sectors are 10x10. Does Dish have any AWS 3 in your area? Could involve the partnership with Dish potentially.
  7. What in the heck? Have never seen one of these before! Really looks cool! Can you post the address to this site, or cross streets? I work at ATT and curious what this looks like through an internal tool for where cell sites are and has information on them in a basic way
  8. My area got the C blocks. No C band for me until 2023 or later. Dallas got 40Mhz roughly of the A block which should be ready for use soon. Curious to see the cell sites with C band equipment
  9. Yeah pretty sure you can do swaps in different markets. Pretty sure that has happened previously with other spectrum swaps. Honestly wish most areas would just complete swaps with the competition to give continuous 10-20mhz swaths instead of separated chunks(Obviously where applicable) pretty sure it would be a better experience for everyone
  10. Yep it was enabled across the board with android 11/One ui 3.0 update. It also enabled N66. I just got the s21 Ultra, and am curious to test if N30 is enabled or if I can enable it
  11. So very interesting find , at my home The 5G upper layer indicator was turned off on certain LTE bands, but still has NR connected. It was on a Band 30 5 mhz one tower, a Band 30 10mhz chunk on another, and my home tower the Band 2 5Mhz chunk now has no indicator on. I am wondering if they are maybe configuring the the tower for DSS NR band 2
  12. https://imgur.com/a/M3Tv3vX What all Is going on with this site? One sector has 5 panels, the other 2 are 4, with 2 larger panels. (Mid rack) This is just a normal 2 B66 10x10 carriers with 1 B2 10x10Mhz, B2 5x5Mhz, b12, b14, B30 5x5Mhz, and N5 5Mhz, with 4g on B5. Also With the Android 11 beta, and a few tweaks I was able to see all of these 5G bands available
  13. Quick look, looks like it was a 20mhz connection on N2, that's not too bad. Wonder if it's DSS or all n2 being converted from LTE. Also noticed B1w being the Primary carrier with N2, that's interesting. From what I've seen in my locale is B2 is the primary LTE carrier with N5 being the NR band of choice.
  14. Well no phones run N30 yet, and there is no N46 to my knowledge. 3G is going to be sunset and it'll be completed by what 2022 iirc. Could always just turn that off on sites early. Doubt it though. Most likely will use DSS though
  15. https://forum.xda-developers.com/galaxy-note-20-ultra/how-to/guide-service-mode-csc-guide-enable-lte-t4182293 For anyone who would want to test out their locals for NR bands other than N5, you have to have a Samsung(possible on other androids, unsure of that though), and you can enable LTE/NR bands, and enable DSS as well
  16. Yep any phone not on Android 11 will be stuck on N5 selectively. They will enable more bands in the coming months. N2 would be impossible to connect to on phones currently unless they ran a specific dialer code and enabled them. But even then it may not connect to them. I've changed the CSCs to other carriers on my U1 version and 5G will not ever show up. Something in the ATT csc is allowing the NR to connect. I still can't go off of hearing about n2 or n66 being live until a screenshot of the engineering screen is posted unfortunately. I am sure in someplace it could be on. DSS is live in a very few select places , specifically know in North Texas it was being tested
  17. Unfortunately no phones have those nr bands turned on. The only way to have those enabled is thru the android 11 Beta, or doing some trickery in a menu. I haven't seen full iPhone specs on NR yet, or to even know what's enabled. But DSS is disabled on all phones unless you manually turn it on deep into a special menu. N5 is the main NR band across the US, and DSS was being tested in a very small part of North Texas that's not been named yet. Now not to say it's not on but I've not seen a valid report of anything other than N5 proved on phones. I would love to see it, and to see DSS on. Now if anyone has seen it I am very curious about what it will show on phones if it'll be anything different or something will show up. Also the note 20 has support for N2, N5, N12, and N66 for ATT N71/N41 is obviously supported but no enabled on ATT software. Let's hope DSS is live nationwide soon . And if you still see B5 still on LTE chances are you will not have 5G live until DSS is up and running, or SA is implemented
  18. Haven't seen any 10x10 n5 yet anywhere. Id have to see pictures to believe it. I work for ATT, and my store is getting a brand new small cell and should have 5G. Our city of over 100k has had 5G since April unofficially, and August officially. I have done some stuff on my note 20 ultra to enable DSS, all phones its disabled to my knowledge. With the android 11 beta they enabled SA 5G on the U1 ATT software. Also saw N2, and N66 enabled. N12 should follow suit next. SA will be when DSS is enabled my guess. Not sure if DSS can work in NSA mode. By the way if yall need anything let me know I can try my best to answer questions, and site questions (Have internal access to site maps, and what's deployed on sites to a general degree)
  19. From my understanding the 5G symbol displays on phones due to an Upperlayer packet being sent to tell the phone to display 5G , even without 5G being present. It is why you can see 5G NR band 5 on ATT, and not see a 5G symbol as the indicator. If you would like I work for ATT, and ny work shows a 5G indicator, but has no NR, and Just up the street a few miles I get an LTR indicator, but have NR band 5 showing. Maybe it can help you out
  20. Yeah Just dialing the *3001#12345#* is a pain. Having the widgets on the screen would be easier for sure
  21. So I was able to end up compiling the package, and even get the widget to be added on. Can’t get the app to display info as my iPhone X isn’t jail broken with root access privileges(think it needs it if I am seeing it correct). Will post some screen shots. Not sure where to go from here until a jailbreak happens for 11.2.1. https://imgur.com/a/2WEBFuj
  22. I was able to recompile it using the Code given, but nothing happens on the IOS 11.2.1. Just a black screen. Not sure what I can do with little code history, But I am trying to play around with it. If anyone wants to help I do not mind trying to contribute to this application. And would share the project once it’s working for others to side load
  23. So I know this thread is pretty much dead, But does anyone have a working .IPA file? I played with the source code some, and got it to compile, But just can not seem to be able to get the .IPA to install
  24. I am sure it is easy to just flash a stock version to the device and Make it a non ad version, but with a $50 discount.
  25. I thought the v10 was rootable?
×
×
  • Create New...